Autor Tópico: configurar o samba? como?  (Lida 6014 vezes)

Offline Daniel767

  • Usuário Ubuntu
  • *
  • Mensagens: 15
  • "Se Deus é por nós quem será contra Nós"
    • Ver perfil
configurar o samba? como?
« Online: 26 de Outubro de 2008, 13:33 »
Olá,pessoal eu sou novo no mundo linux e trabalho em uma empresa que todas máquinas ultilizam ruindows pois só a minha ultiliza linux ubuntu 8.04.pois eu gostaria de acessar os arquivos das outras máquinas mas não consigo,  instalei aqui o samba mas não consigo configura-lo,alguém tem alguma dica?
segue a seguinte configuração:


#======================= Global Settings =======================

[global]
   log file = /var/log/samba/log.%m
   printer = HP_LaserJet_1018
   passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .
   socket options = TCP_NODELAY
   obey pam restrictions = yes
   map to guest = bad user
   encrypt passwords = true
   passdb backend = tdbsam
   passwd program = /usr/bin/passwd %u
   wins support = true
   dns proxy = no
   netbios name = ubuntu linux samba server
   server string = %h server (Samba, Ubuntu)
   password server = 028641MG
   invalid users = root
   default = print$
   path = /etc
   unix password sync = yes
   workgroup = MSHOME
   os level = 20
   syslog = 0
   usershare allow guests = yes
   panic action = /usr/share/samba/panic-action %d
   max log size = 1000
   pam password change = yes

## Browsing/Identification ###

# Change this to the workgroup/NT-domain name your Samba server will part of

# server string is the equivalent of the NT Description field

# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable its WINS Server
;   wins support = no

# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
;   wins server = w.x.y.z

# This will prevent nmbd to search for NetBIOS names through DNS.

# What naming service and in what order should we use to resolve host names
# to IP addresses
;   name resolve order = lmhosts host wins bcast

#### Networking ####

# The specific set of interfaces / networks to bind to
# This can be either the interface name or an IP address/netmask;
# interface names are normally preferred
;   interfaces = 127.0.0.0/8 eth0

# Only bind to the named interfaces and/or networks; you must use the
# 'interfaces' option above to use this.
# It is recommended that you enable this feature if your Samba machine is
# not protected by a firewall or is a firewall itself.  However, this
# option cannot handle dynamic or non-broadcast interfaces correctly.
;   bind interfaces only = true



#### Debugging/Accounting ####

# This tells Samba to use a separate log file for each machine
# that connects

# Cap the size of the individual log files (in KiB).

# If you want Samba to only log through syslog then set the following
# parameter to 'yes'.
;   syslog only = no

# We want Samba to log a minimum amount of information to syslog. Everything
# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
# through syslog you should set the following parameter to something higher.

# Do something sensible when Samba crashes: mail the admin a backtrace


####### Authentication #######

# "security = user" is always a good idea. This will require a Unix account
# in this server for every user accessing the server. See
# /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/ServerType.html
# in the samba-doc package for details.
;   security = user

# You may wish to use password encryption.  See the section on
# 'encrypt passwords' in the smb.conf(5) manpage before enabling.

# If you are using encrypted passwords, Samba will need to know what
# password database type you are using. 


;   guest account = nobody

# This boolean parameter controls whether Samba attempts to sync the Unix
# password with the SMB password when the encrypted SMB password in the
# passdb is changed.

# For Unix password sync to work on a Debian GNU/Linux system, the following
# parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
# sending the correct chat script for the passwd program in Debian Sarge).

# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.

# This option controls how nsuccessful authentication attempts are mapped
# to anonymous connections

########## Domains ###########

# Is this machine able to authenticate users. Both PDC and BDC
# must have this setting enabled. If you are the BDC you must
# change the 'domain master' setting to no
#
;   domain logons = yes
#
# The following setting only takes effect if 'domain logons' is set
# It specifies the location of the user's profile directory
# from the client point of view)
# The following required a [profiles] share to be setup on the
# samba server (see below)
;   logon path = \\%N\profiles\%U
# Another common choice is storing the profile in the user's home directory
;   logon path = \\%N\%U\profile

# The following setting only takes effect if 'domain logons' is set
# It specifies the location of a user's home directory (from the client
# point of view)
;   logon drive = H:
;   logon home = \\%N\%U

# The following setting only takes effect if 'domain logons' is set
# It specifies the script to run during logon. The script must be stored
# in the [netlogon] share
# NOTE: Must be store in 'DOS' file format convention
;   logon script = logon.cmd

# This allows Unix users to be created on the domain controller via the SAMR
# RPC pipe.  The example command creates a user account with a disabled Unix
# password; please adapt to your needs
; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u

########## Printing ##########

# If you want to automatically load your printer list rather
# than setting them up individually then you'll need this
;   load printers = yes

# lpr(ng) printing. You may wish to override the location of the
# printcap file
;   printing = bsd
;   printcap name = /etc/printcap

# CUPS printing.  See also the cupsaddsmb(8) manpage in the
# cupsys-client package.
;   printing =
;   printcap name =

############ Misc ############

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
;   include = /home/samba/etc/smb.conf.%m

# Most people will find that this option gives better performance.
# See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/speed.html
# for details
# You may want to add the following on a Linux system:
#         SO_RCVBUF=8192 SO_SNDBUF=8192

# The following parameter is useful only if you have the linpopup package
# installed. The samba maintainer and the linpopup maintainer are
# working to ease installation and configuration of linpopup and samba.
;   message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s' &

# Domain Master specifies Samba to be the Domain Master Browser. If this
# machine will be configured as a BDC (a secondary logon server), you
# must set this to 'no'; otherwise, the default behavior is recommended.
;   domain master = auto

# Some defaults for winbind (make sure you're not using the ranges
# for something else.)
;   idmap uid = 10000-20000
;   idmap gid = 10000-20000
;   template shell = /bin/bash

# The following was the default behaviour in sarge,
# but samba upstream reverted the default because it might induce
# performance issues in large organizations.
# See Debian bug #368251 for some of the consequences of *not*
# having this setting and smb.conf(5) for details.
;   winbind enum groups = yes
;   winbind enum users = yes

# Setup usershare options to enable non-root users to share folders
# with the net usershare command.

# Maximum number of usershare. 0 (default) means that usershare is disabled.
;   usershare max shares = 100

# Allow users who've been granted usershare privileges to create
# public shares, not just authenticated ones

#======================= Share Definitions =======================

# Un-comment the following (and tweak the other settings below to suit)
# to enable the default home directory shares.  This will share each
# user's home directory as \\server\username
;[homes]
;   comment = Home Directories
;   browseable = no

# By default, the home directories are exported read-only. Change the
# next parameter to 'no' if you want to be able to write to them.
;   read only = yes

# File creation mask is set to 0700 for security reasons. If you want to
# create files with group=rw permissions, set next parameter to 0775.
;   create mask = 0700

# Directory creation mask is set to 0700 for security reasons. If you want to
# create dirs. with group=rw permissions, set next parameter to 0775.
;   directory mask = 0700

# By default, \\server\username shares can be connected to by anyone
# with access to the samba server.  Un-comment the following parameter
# to make sure that only "username" can connect to \\server\username
# This might need tweaking when using external authentication schemes
;   valid users = %S

# Un-comment the following and create the netlogon directory for Domain Logons
# (you need to configure Samba to act as a domain controller too.)
;[netlogon]
;   comment = Network Logon Service
;   path = /home/samba/netlogon
;   guest ok = yes
;   read only = yes
;   share modes = no

# Un-comment the following and create the profiles directory to store
# users profiles (see the "logon path" option above)
# (you need to configure Samba to act as a domain controller too.)
# The path below should be writable by all users so that their
# profile directory may be created the first time they log on
;[profiles]
;   comment = Users profiles
;   path = /home/samba/profiles
;   guest ok = no
;   browseable = no
;   create mask = 0600
;   directory mask = 0700

[printers]
   comment = All Printers
   browseable = no
   path = /var/spool/samba
   printable = yes
   guest ok = no
   read only = yes
   create mask = 0700

# Windows clients look for this share name as a source of downloadable
# printer drivers
[print$]
   guest ok = no
   force user = daniel
   comment = Printer Drivers
   writable = no
   path = /var/lib/samba/printers
   force group = adm
# Uncomment to allow remote administration of Windows print drivers.
# Replace 'ntadmin' with the name of the group your admin users are
# members of.
;   write list = root, @ntadmin

# A sample share for sharing your CD-ROM with others.
;[cdrom]
;   comment = Samba server's CD-ROM
;   read only = yes
;   locking = no
;   path = /cdrom
;   guest ok = yes

# The next two parameters show how to auto-mount a CD-ROM when the
#   cdrom share is accesed. For this to work /etc/fstab must contain
#   an entry like this:
#
#       /dev/scd0   /cdrom  iso9660 defaults,noauto,ro,user   0 0
#
# The CD-ROM gets unmounted automatically after the connection to the
#
# If you don't want to use auto-mounting/unmounting make sure the CD
#   is mounted on /cdrom
#
;   preexec = /bin/mount /cdrom
;   postexec = /bin/umount /cdrom


Offline Felix

  • Equipe Ubuntu
  • Usuário Ubuntu
  • *****
  • Mensagens: 3.068
    • Ver perfil
    • Alexsandro Felix
Re: configurar o samba? como?
« Resposta #1 Online: 26 de Outubro de 2008, 14:11 »
Na verdade o Samba é para que as máquinas Windows acessem sua máquina Linux, para você acessar as máquinas windows pelo Ubuntu é necessário primeiro que tais máquinas estejam com os compartilhamentos ativos, depois você pode procurá-las indo mo menu Locais - Rede, caso não visualize-as talvez você precise do pacote smbclient, instalável através do synaptic, apt-get ou aptitude

Offline Daniel767

  • Usuário Ubuntu
  • *
  • Mensagens: 15
  • "Se Deus é por nós quem será contra Nós"
    • Ver perfil
Re: configurar o samba? como?
« Resposta #2 Online: 26 de Outubro de 2008, 14:30 »
Pois eu já tenho o smbclient instalado em minha maquina.

sudo apt-get install smbclient
[sudo] password for daniel:
Lendo lista de pacotes... Pronto
Construindo árvore de dependências       
Lendo estado da informação... Pronto
smbclient já é a versão mais nova.
0 pacotes atualizados, 0 pacotes novos instalados, 0 a serem removidos e 0 não atualizados.
daniel@daniel-desktop:~$


Offline huggsy

  • Usuário Ubuntu
  • *
  • Mensagens: 28
    • Ver perfil
Re: configurar o samba? como?
« Resposta #3 Online: 27 de Outubro de 2008, 10:17 »
Hi,

Para poderes utilisar o samba, tens que criar um user,
Através  do seguinte comando :

smbpasswd -a user
password :
retype password:

Depois deves poder aceder aos arquivos das maquinas Win.

Google is your friend :)

Enjoy

In a world with Linux, who needs windows and Gates!!!

Offline cruel

  • Usuário Ubuntu
  • *
  • Mensagens: 22
  • Lonely Hunter
    • Ver perfil
Re: configurar o samba? como?
« Resposta #4 Online: 03 de Novembro de 2008, 10:16 »
Bom dia...
Seguinte, primeiro vc cria uma pasta e da permissão total pra ela(chmod 777), depois vc inclui no seu smb.conf,
antes da linha [printers], o seguinte comando:

[public]
        comment = public (nome da pasta)
        path = /public (local onde está criada a pasta)
        guest ok = yes
;       browseable = yes
        writeable = yes
;       printable = no
        write list = @staff
        create mask = 0666
#        veto files = /*.mp3/*.wma/*.avi/*.wmv/*.mpeg (eu uso isto no meu servidor para proibir determinados tipos de arquivos, fica ao seu critério)