Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Tópicos - Intruder_A6

Páginas: [1]
1
Senhores,

Tenho um Kubuntu 13.04 instalado e numa tentativa de fazer a interface gráfica voltar a funcionar direito acabei me deparando com o seguinte erro ao executar o comando :

Código: [Selecionar]
sudo apt-get upgrade
O que provocou uma enorme mensagem de erro que copio parcialmente abaixo :
Código: [Selecionar]
cp: falha ao estender “/tmp/mkinitramfs_XpaRzE//lib/x86_64-linux-gnu/libuuid.so.1”: Não há espaço disponível no dispositivo
cp: escrevendo “/tmp/mkinitramfs_XpaRzE//lib/brltty/brltty.sh”: Não há espaço disponível no dispositivo
cp: falha ao estender “/tmp/mkinitramfs_XpaRzE//lib/brltty/brltty.sh”: Não há espaço disponível no dispositivo
E: /usr/share/initramfs-tools/hooks/brltty failed with return 1.
update-initramfs: failed for /boot/initrd.img-3.8.0-22-generic with 1.
dpkg: erro ao processar initramfs-tools (--configure):
 sub-processo script post-installation instalado retornou estado de saída de erro 1
Nenhum relatório do apport gravado porque MaxReports já foi atingido
                                                                    Erros foram encontrados durante o processamento de:
 linux-image-3.8.0-23-generic
 fglrx
 fglrx-amdcccle
 linux-image-extra-3.8.0-23-generic
 linux-image-generic
 linux-generic
 initramfs-tools
E: Sub-process /usr/bin/dpkg returned an error code (1)

Aparentemente o meu sistema tem muito espaço livre no HD (que é de 2TB com tudo para o Kubuntu e sem separação entre o root e os usuários):

Código: [Selecionar]
#df -ih
Sist. Arq.     Inodes IUsado ILivr IUso% Montado em
/dev/sda5        117M   216K  116M    1% /
none             495K      1  495K    1% /sys/fs/cgroup
udev             483K    513  482K    1% /dev
tmpfs            495K    447  494K    1% /run
none             495K      1  495K    1% /run/lock
none             495K      1  495K    1% /run/shm
none             495K      5  495K    1% /run/user
overflow         495K      7  495K    1% /tmp

Pesquisando na internet achei as seguintes sugestões (que já tentei sem sucesso, mas não necessariamente nessa ordem, e não lembro mais que comandos tentei além disso):

Código: [Selecionar]
sudo apt-get install -f
Código: [Selecionar]
sudo dpkg --configure -a
Código: [Selecionar]
sudo apt-get autoremove
Código: [Selecionar]
sudo apt-get --purge autoremove
Código: [Selecionar]
sudo apt-get autoclean
Código: [Selecionar]
sudo apt-get clean


E por fim tentei remover os pacotes problemáticos, mas no último (initramfs-tools) tem uma enorme lista de dependências, tão grande que o sistema me avisou do potencial de destruição que eu poderia provocar.

O que eu posso fazer para tentar consertar esta besteira ?

Agradeço antecipadamente toda ajuda recebida.











2
Quarentena / Re: Instalando a sua placa de video Nvidia/ATi
« Online: 29 de Janeiro de 2011, 01:24 »
Senhores,

Tenho uma ATI (on-board) Radeon HD 4290 e instalei o último driver para ATI, agora o meu Kubuntu 10.10 64 bits só entra no modo de segurança e mesmo assim só no modo texto. Na execução normal para até de responder ao teclado. O roteiro que segui foi este => http://www.meroprojects.com/community/viewtopic.php?f=5&t=9

Vocês sabem que pacotes preciso re-instalar para que pelo menos o meu Kubuntu volte a ter vídeo ?

Tinha esperança que os drivers da ATI tivessem melhorado. Acho que vou comprar uma placa de vídeo nVidia, pois com ela não dá dor de cabeça no Linux (o instalador dela funciona tão bem que até parece os instadores no Ruindows), mas é uma pena pois o meu micro está gastando 70W no funcionamento normal, e deve aumentar muito instalado um vídeo PCIE off-board.

Alguém tem uma solução para o meu problema ?

3
Senhores,

Tenho o Kubuntu 10.04 64 bits instalado e fui tentar atualizar para a versão 10.10, mas a atualização não termina de baixar os pacotes, dá o erro abaixo:

Citar
Failed to fetch
http://br.archive.ubuntu.com/ubuntu/pool/universe/k/kdepimlibs/kdepimlibs5_4.5.1-0ubuntu1_amd64.deb 404  Not Found
Failed to fetch
http://br.archive.ubuntu.com/ubuntu/pool/universe/r/rpm/python-rpm_4.8.1-5_amd64.deb 404  Not Found

Se eu remover o pacote kdepimlibs5_4.5.1-0ubuntu1_amd64.deb praticamente eu mato o KDE (tem muitos pacotes que dependem dele, praticamente o KDE todo), como eu posso contornar este problema e prosseguir na atualização ?


Antecipadamente agradeço toda ajuda.

4
Presados Senhores,

Estou com o Kubuntu 8.04.1 64bits e tenho uma placa de som Creative SB Audigy Platinum I, mas estranhamente desde que instalei esta versão ( instalei do zero ) a placa de som está muda.

O meu Hardware:
Citar
sudo lspci
00:00.0 Host bridge: Intel Corporation 82X38/X48 Express DRAM Controller (rev 01)
00:01.0 PCI bridge: Intel Corporation 82X38/X48 Express Host-Primary PCI Express Bridge (rev 01)
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02)
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02)
00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02)
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 02)
00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 02)
00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 02)
00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92)
00:1f.0 ISA bridge: Intel Corporation 82801IR (ICH9R) LPC Interface Controller (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 4 port SATA IDE Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02)
00:1f.5 IDE interface: Intel Corporation 82801I (ICH9 Family) 2 port SATA IDE Controller (rev 02)
01:00.0 VGA compatible controller: nVidia Corporation Unknown device 05e2 (rev a1)
02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8056 PCI-E Gigabit Ethernet Controller (rev 12)
03:00.0 IDE interface: JMicron Technologies, Inc. JMB368 IDE controller
04:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8056 PCI-E Gigabit Ethernet Controller (rev 12)
06:01.0 SCSI storage controller: Adaptec AHA-2940/2940W / AIC-7871
06:02.0 Multimedia audio controller: Creative Labs SB Audigy (rev 03)
06:02.1 Input device controller: Creative Labs SB Audigy Game Port (rev 03)
06:02.2 FireWire (IEEE 1394): Creative Labs SB Audigy FireWire Port
06:03.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev c0)

Os modulos carregados:
Citar
sudo lsmod
Module                  Size  Used by
nls_iso8859_1           6656  1
nls_cp437               8320  1
vfat                   16256  1
fat                    60592  1 vfat
rfcomm                 47392  4
l2cap                  28800  13 rfcomm
af_packet              27272  0
ppdev                  11400  0
acpi_cpufreq           10832  3
cpufreq_powersave       3200  0
cpufreq_stats           8416  0
cpufreq_userspace       6180  0
cpufreq_conservative    10632  0
cpufreq_ondemand       11152  1
freq_table              6464  3 acpi_cpufreq,cpufreq_stats,cpufreq_ondemand
video                  23444  0
output                  5632  1 video
dock                   12960  0
sbs                    17808  0
sbshc                   8960  1 sbs
container               6656  0
battery                16776  0
iptable_filter          4608  0
ip_tables              24104  1 iptable_filter
x_tables               23560  1 ip_tables
aes_x86_64             26920  0
dm_crypt               16776  0
dm_mod                 71160  1 dm_crypt
ac                      8328  0
coretemp                9856  0
w83627ehf              27272  0
w83791d                25500  0
hwmon_vid               5120  2 w83627ehf,w83791d
i2c_i801               12188  0
sbp2                   27272  0
parport_pc             41128  0
lp                     14916  0
parport                44300  3 ppdev,parport_pc,lp
snd_usb_audio         100256  1
snd_usb_lib            21120  1 snd_usb_audio
snd_emu10k1_synth       9472  0
lirc_atiusb            21424  0
snd_emux_synth         40960  1 snd_emu10k1_synth
lirc_dev               18248  1 lirc_atiusb
snd_seq_virmidi         9344  1 snd_emux_synth
ipv6                  311720  16
snd_seq_midi_emul       9088  1 snd_emux_synth
snd_emu10k1           162272  3 snd_emu10k1_synth
snd_ac97_codec        123224  1 snd_emu10k1
ac97_bus                3840  1 snd_ac97_codec
snd_hda_intel         440536  0
snd_util_mem            6656  2 snd_emux_synth,snd_emu10k1
snd_hwdep              12552  4 snd_usb_audio,snd_emux_synth,snd_emu10k1,snd_hda_intel
snd_pcm_oss            47648  0
snd_pcm                92168  6 snd_usb_audio,snd_emu10k1,snd_ac97_codec,snd_hda_intel,snd_pcm_oss
tuner                  49056  0
tea5767                 7812  1 tuner
tda8290                13828  1 tuner
snd_page_alloc         13200  3 snd_emu10k1,snd_hda_intel,snd_pcm
tuner_simple           10632  1 tuner
mt20xx                 14600  1 tuner
tea5761                 6916  1 tuner
snd_mixer_oss          20224  1 snd_pcm_oss
saa7115                18320  0
snd_seq_dummy           5764  0
joydev                 15488  0
snd_seq_oss            38912  0
snd_seq_midi           10688  0
lmpcm_usb               8192  0
hci_usb                19228  2
em28xx                 54576  0
ati_remote             14348  0
usblp                  17664  0
compat_ioctl32         11136  1 em28xx
ir_common              39812  1 em28xx
cp2101                 17156  0
videodev               30720  1 em28xx
v4l2_common            21888  5 tuner,saa7115,em28xx,compat_ioctl32,videodev
v4l1_compat            15492  2 em28xx,videodev
pl2303                 24452  0
bluetooth              67748  7 rfcomm,l2cap,hci_usb
snd_rawmidi            29856  4 snd_usb_lib,snd_seq_virmidi,snd_emu10k1,snd_seq_midi
usbserial              41840  2 cp2101,pl2303
tveeprom               20624  1 em28xx
nvidia               7816520  26
i2c_core               28544  12 w83791d,i2c_i801,tuner,tea5767,tda8290,tuner_simple,mt20xx,tea5761,saa7115,em28xx,tveeprom,nvidia
snd_seq_midi_event     10112  3 snd_seq_virmidi,snd_seq_oss,snd_seq_midi
sky2                   53892  0
snd_seq                63232  9 snd_emux_synth,snd_seq_virmidi,snd_seq_midi_emul,snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer              27912  3 snd_emu10k1,snd_pcm,snd_seq
snd_seq_device         10644  8 snd_emu10k1_synth,snd_emux_synth,snd_emu10k1,snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
emu10k1_gp              5632  0
snd                    70856  22 snd_usb_audio,snd_usb_lib,snd_emux_synth,snd_seq_virmidi,snd_emu10k1,snd_ac97_codec,snd_hda_intel,snd_hwdep,snd_pcm_oss,snd_pcm,snd_mixer_oss,snd_seq_dummy,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
gameport               17936  2 emu10k1_gp
button                 10912  0
iTCO_wdt               15312  0
iTCO_vendor_support     5764  1 iTCO_wdt
soundcore              10400  1 snd
shpchp                 38172  0
pci_hotplug            34608  1 shpchp
evdev                  14976  4
pcspkr                  4992  0
ext3                  149264  1
jbd                    57000  1 ext3
mbcache                11392  1 ext3
sr_mod                 20132  0
cdrom                  41512  1 sr_mod
sg                     41880  0
sd_mod                 33280  8
usbhid                 35680  0
hid                    44992  1 usbhid
usb_storage            82496  0
libusual               23520  1 usb_storage
ata_generic             9988  0
ata_piix               24196  6
ohci1394               36532  0
floppy                 69096  0
ieee1394              106968  2 sbp2,ohci1394
aic7xxx               177116  0
scsi_transport_spi     30592  1 aic7xxx
pata_jmicron            8448  0
pata_acpi               9856  0
libata                176432  4 ata_generic,ata_piix,pata_jmicron,pata_acpi
scsi_mod              178488  8 sbp2,sr_mod,sg,sd_mod,usb_storage,aic7xxx,scsi_transport_spi,libata
ehci_hcd               41996  0
uhci_hcd               29856  0
usbcore               170288  17 snd_usb_audio,snd_usb_lib,lirc_atiusb,lmpcm_usb,hci_usb,em28xx,ati_remote,usblp,cp2101,pl2303,usbserial,usbhid,usb_storage,libusual,ehci_hcd,uhci_hcd
thermal                19744  1
processor              41832  2 acpi_cpufreq,thermal
fan                     6792  1
fbcon                  46336  0
tileblit                4096  1 fbcon
font                   10112  1 fbcon
bitblit                 7424  1 fbcon
softcursor              3712  1 bitblit
fuse                   56112  7

O driver da Audigy está aparentemente carregado => emu10k1, mas o som fica totalmente mudo ( sem erro aparente ).

O que pode estar acontecendo de errado e como resolver ? Nunca tinha tido problemas antes no Linux com placas de audio da Creative, isto para mim é total novidade e não sei nem por onde começar.


Toda ajuda será muito bem vinda.

5
Prezados Senhores,

Atualizei do Kubuntu 6.06 para 7.04 (  foi um salto de duas versões do Kubuntu direto, e do kernel 2.6.16  para o 2.6.20 ), e depois disso, não consigo mais que o teclado ABNT2 seja reconhecido corretamente. E por causa disso as teclas dele funcionam como se estivesse configurado para o teclado internacional, com várias teclas sem funcionar como : ç ; ª ; º ; ? ; entre outras ( antes da atualização funcionava normal ). Abaixo vai o xorg.conf

Código: [Selecionar]
Section "Files"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "vbe"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "abnt2"
Option "XkbLayout" "br"
Option "XkbVariant" "abnt2"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "stylus"
  Option        "Device"        "/dev/wacom"          # Change to
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "stylus"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "eraser"
  Option        "Device"        "/dev/wacom"          # Change to
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "eraser"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "cursor"
  Option        "Device"        "/dev/wacom"          # Change to
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "cursor"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "Device"
Identifier "NVIDIA Corporation NV40 [GeForce 6800 GT]"
Driver "nvidia"
BusID "PCI:1:0:0"
EndSection

Section "Monitor"
Identifier "Generic Monitor"
Option "DPMS"
HorizSync 31.5-67
VertRefresh 50-75

EndSection

Section "Screen"
Identifier "Default Screen"
Device "NVIDIA Corporation NV40 [GeForce 6800 GT]"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x1024@60" "1024x768@60" "832x624@60" "800x600@60" "720x400@60" "640x480@60"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024@60" "1024x768@60" "832x624@60" "800x600@60" "720x400@60" "640x480@60"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024@60" "1024x768@60" "832x624@60" "800x600@60" "720x400@60" "640x480@60"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024@60" "1024x768@60" "832x624@60" "800x600@60" "720x400@60" "640x480@60"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024@60" "1024x768@60" "832x624@60" "800x600@60" "720x400@60" "640x480@60"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024@60" "1024x768@60" "832x624@60" "800x600@60" "720x400@60" "640x480@60"
EndSubSection
EndSection

Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice     "stylus" "SendCoreEvents"
InputDevice     "cursor" "SendCoreEvents"
InputDevice     "eraser" "SendCoreEvents"
EndSection

Section "DRI"
Mode 0666
EndSection

Section "Extensions"
Option "Composite" "Enable"
EndSection




Estranhamente não aparece esta opção para mim, no meu caso aparece sem opção de teclado para escolher



Está aparecendo assim para mim ( sem opção para trocar para ABNT2 )



E no locale da este resultado abaixo:
Código: [Selecionar]
LANG=pt_BR.UTF-8
LANGUAGE=pt_BR:pt:pt_PT
LC_CTYPE="pt_BR"
LC_NUMERIC="pt_BR"
LC_TIME="pt_BR"
LC_COLLATE="pt_BR"
LC_MONETARY="pt_BR"
LC_MESSAGES="pt_BR"
LC_PAPER="pt_BR"
LC_NAME="pt_BR"
LC_ADDRESS="pt_BR"
LC_TELEPHONE="pt_BR"
LC_MEASUREMENT="pt_BR"
LC_IDENTIFICATION="pt_BR"
LC_ALL=pt_BR


Estou também com um erro que acontece toda vez que entro no X, que já está enchendo o saco.
Quando entro no X sempre abre uma janela de erro ( 3 vezes ) com a seguinte mensagem:

A janela tem o nome de Framework do Bluetooth para o KDE - KBluetoothD
Código: [Selecionar]
Falha para conectar ao servidor SDP

Detalhes
Por favor tenha certeza de que o sdpd está rodando;
sem isso, outros dispositivos não serão capazes de
descobrir quais serviços seu computador oferece.
Eu consegui contornar para fazer funcionar o bluetooth, mas não consegui descobrir como elimino este erro chato.

Toda a ajuda será muito bem vinda.

6
Atualizei praticamente sem problemas do Edgy para o Feisty ( inicialmente ainda numa máquina virtual do VMware, estou fazendo a atualização agora numa máquina real ), e para atualizar eu mudei os repositórios do Edgy para Feisty ( troquei as referências no arquivo /etc/apt/source.list ) e atualizei usando os comandos
Código: [Selecionar]
sudo apt-get update
sudo apt-get dist-upgrade
e ai foi só esperar baixar uns 800MB ( no meu caso ) o que foi em poucas horas ( na velocidade máxima da minha conexão ).

Consegui atualizar razoavelmente fácil ( Kubuntu Edgy para Feisty ), foi muito mais fácil do que foi do Dapper para o Edgy, mas fui fazer uns ajustes no painel do KDE e baguncei ele todo, e agora estou sem conseguir recolocar o painel da barra de tarefas ( só consigo a externa ), e nem o painel que mostra as janelas e que me permite navegar entre elas ( está tudo diferente no novo KDE do Feisty ).

Alguém sabe como eu posso voltar os painéis do KDE para o default ?

No resto foi uma atualização muito tranqüila, muito mais do que eu estou acostumado a passar em outras atualizações.



Toda ajuda será muito bem vinda.

7
Internet, Redes e Segurança / mrtg não funciona após um reboot
« Online: 16 de Setembro de 2006, 08:59 »
Presados Senhores,

Toda vez que reinicio o Kubuntu ( 6.06 ) o mrtg deixa e funcionar.

Abaixo o comando que é executado a cada 5 minutos

Código: [Selecionar]
#env LANG=C /usr/bin/mrtg /var/www/mrtg/mrtg.cfg
ERROR: Creating templock /var/lock/mrtg/_var_www_mrtg_mrtg.cfg_l_5117: No such file or directory at /usr/bin/mrtg line 1645.

Só voltando ao normal quando reinstalo o mrtg, isto em todas as vezes que preciso reinicializar o micro ( é um porre ).

O que será que esta acontecendo de errado e como resolver o problema ???


Toda ajuda será muito bem vinda.


8
Prezados Senhores,

Uma coisa bem desagradável aconteceu com o meu Kubuntu, depois de uma atualização para o kernel 2.6.15-25-k7 não consigo mais logar como usuário na tela gráfica do Kubuntu ( consigo no console ), e mesmo quando logo no console o X não entra, só entrando como root ( logando no console primeiro e subindo o x manualmente ). Isto passou a acontecer logo depois de dar o boot pelo kernel atualizado.

Tentei rodar pela versão mais antiga do kernel e não tive resultado, já fiz uma segunda atualização de kernel ( agora para 2.6.15-26-k7 ) e continuou na mesma.

Abaixo vai um trecho do log do Xorg:
Código: [Selecionar]
(II) fglrx(0): UMM Bus area:     0xc0701000 (size=0x078ff000)
(II) fglrx(0): UMM area:     0xc0701000 (size=0x078ff000)
(II) fglrx(0): driver needs X.org 6.8.x.y with x.y >= 99.8
(II) fglrx(0): detected X.org 7.0.0.0
(WW) fglrx(0): ***********************************************
(WW) fglrx(0): * DRI initialization failed!                  *
(WW) fglrx(0): * (maybe driver kernel module missing or bad) *
(WW) fglrx(0): * 2D acceleraton available (MMIO)             *
(WW) fglrx(0): * no 3D acceleration available                *
(WW) fglrx(0): ********************************************* *
(II) fglrx(0): FBADPhys: 0xc0000000 FBMappedSize: 0x08000000
(II) fglrx(0): FBMM initialized for area (0,0)-(1280,8191)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1280,1024) (front color buffer - assumption)
(==) fglrx(0): Backing store disabled
(==) fglrx(0): Silken mouse enabled
(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
Solid Horizontal and Vertical Lines
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
32 256x256 slots
16 512x512 slots
(II) fglrx(0): Acceleration enabled
(II) fglrx(0): Direct rendering disabled
(==) fglrx(0): Using hardware cursor
(II) fglrx(0): Largest offscreen area available: 1280 x 7163
(II) Loading extension FGLRXEXTENSION
(II) Loading extension ATITVOUT
(==) RandR enabled
(II) Setting vga for screen 0.
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(**) Option "CoreKeyboard"
(**) Generic Keyboard: Core Keyboard
(**) Option "Protocol" "standard"
(**) Generic Keyboard: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Generic Keyboard: XkbRules: "xorg"
(**) Option "XkbModel" "abnt2"
(**) Generic Keyboard: XkbModel: "abnt2"
(**) Option "XkbLayout" "br"
(**) Generic Keyboard: XkbLayout: "br"
(**) Option "XkbVariant" "abnt2"
(**) Generic Keyboard: XkbVariant: "abnt2"
(**) Option "CustomKeycodes" "off"
(**) Generic Keyboard: CustomKeycodes disabled
(**) Option "Protocol" "ExplorerPS/2"
(**) Configured Mouse: Device: "/dev/input/mice"
(**) Configured Mouse: Protocol: "ExplorerPS/2"
(**) Option "CorePointer"
(**) Configured Mouse: Core Pointer
(**) Option "Device" "/dev/input/mice"
(==) Configured Mouse: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Configured Mouse: ZAxisMapping: buttons 4 and 5
(**) Configured Mouse: Buttons: 9
(II) XINPUT: Adding extended input device "Configured Mouse" (type: MOUSE)
(II) XINPUT: Adding extended input device "Generic Keyboard" (type: KEYBOARD)
(WW) Couldn't load XKB keymap, falling back to pre-XKB keymap
(II) Configured Mouse: ps2EnableDataReporting: succeeded
FreeFontPath: FPE "/usr/share/X11/fonts/misc" refcount is 2, should be 1; fixing.


Abaixo o xorg.conf:
Código: [Selecionar]
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
  FontPath "/usr/share/X11/fonts/misc"
  FontPath "/usr/share/X11/fonts/cyrillic"
  FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
  FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
  FontPath "/usr/share/X11/fonts/Type1"
  FontPath "/usr/share/X11/fonts/100dpi"
  FontPath "/usr/share/X11/fonts/75dpi"
  # path to defoma fonts
  FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
  Load "bitmap"
  Load "ddc"
  Load "extmod"
  Load "freetype"
  Load "fglrx"
  Load "int10"
  Load "type1"
  Load "vbe"
  load "glx"
  load "dbe"
  load "v4l"
EndSection

Section "InputDevice"
  Identifier "Generic Keyboard"
  Driver "kbd"
  option "CoreKeyboard"
  option "XkbRules" "xorg"
  option "XkbModel" "abnt2"
  option "XkbLayout" "br"
  option "XkbVariant" "abnt2"
EndSection

Section "InputDevice"
  Identifier "Configured Mouse"
  Driver "mouse"
  option "CorePointer"
  option "Device" "/dev/input/mice"
  option "Protocol" "ExplorerPS/2"
  option "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
  Driver "wacom"
  Identifier "stylus"
  option "Device" "/dev/wacom"# Change to
  option "Type" "stylus"
  option "ForceDevice" "ISDV4"# Tablet PC ONLY
  # /dev/input/event
  # for USB
EndSection

Section "InputDevice"
  Driver "wacom"
  Identifier "eraser"
  option "Device" "/dev/wacom"# Change to
  option "Type" "eraser"
  option "ForceDevice" "ISDV4"# Tablet PC ONLY
  # /dev/input/event
  # for USB
EndSection

Section "InputDevice"
  Driver "wacom"
  Identifier "cursor"
  option "Device" "/dev/wacom"# Change to
  option "Type" "cursor"
  option "ForceDevice" "ISDV4"# Tablet PC ONLY
  # /dev/input/event
  # for USB
EndSection

Section "Device"
  identifier "Generic Video Card"
  boardname "ati"
  busid "PCI:2:0:0"
  driver "fglrx"
  screen 0
EndSection

Section "Monitor"
  identifier "Generic Monitor"
  modelname "Custom 1"
  modeline  "1024x768@75" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
  modeline  "1024x768@60" 65.0 1024 1048 1184 1344 768 771 777 806 -vsync -hsync
  modeline  "1280x1024@75" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
  modeline  "1280x1024@60" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
  gamma 1.0
EndSection

Section "Screen"
  Identifier "Default Screen"
  Device "Generic Video Card"
  Monitor "Generic Monitor"
  DefaultDepth 24
  SubSection "Display"
    depth 24
    modes "1280x1024@75" "1280x1024@60"
  EndSubSection
EndSection

Section "ServerLayout"
  Identifier "Default Layout"
  screen 0 "Default Screen" 0 0
  InputDevice "Generic Keyboard"
  InputDevice "Configured Mouse"
  # InputDevice     "stylus" "SendCoreEvents"
  # InputDevice     "cursor" "SendCoreEvents"
  # InputDevice     "eraser" "SendCoreEvents"
EndSection

Section "DRI"
  Mode 0666
EndSection
Section "device" #
  identifier "device1"
  boardname "ati"
  busid "PCI:2:0:0"
  driver "fglrx"
  screen 1
EndSection
Section "screen" #
  identifier "screen1"
  device "device1"
  defaultdepth 24
  monitor "monitor1"
EndSection
Section "monitor" #
  identifier "monitor1"
  gamma 1.0
EndSection
Section "ServerFlags"
EndSection

A minha placa de vídeo atual é uma ATI 9800 Pro.

Parece que depois da atualização do kernel a aceleração 3D que antes estava funcionando perfeito ( testei inclusive com alguns jogos ) foi para o brejo ( ô driver ruim este da ATI, ainda bem que em breve trocarei por uma nVidia ).

Toda ajuda será muito bem vinda.

9
Aplicativos / Skype só conecta na Internet como Root
« Online: 11 de Junho de 2006, 08:06 »
Prezados Senhores,

Estou com um problema bem estranho, o meu Skype ( atualizei pelo Automatix ) só conecta no servidor se eu configurá-lo para funcionar com a permissão de root ( o que não é lá muito recomendável ), se eu removo a opção ele nunca consegue conexão.

O que será que está acontecendo e como resover este problema ?

Atualmente estou usando a versão Dapper do Kubuntu.


Toda ajuda será muito bem vinda.

10
Sistema / Resolvido - Kubuntu Dapper, Problemas ( NTOP, Pendrive e etc. )
« Online: 04 de Junho de 2006, 21:45 »
Prezados Senhores,

Usava o Kubuntu versão Breezy sem problemas, montava o meu pendrive automaticamente, e também o meu HD externo USB, mas agora no Dapper não estou conseguindo ( já instalei o usbmount entre outras coisas ).

E o meu NTOP funcionava redondo, mas ele agora não mostra mais graficamente o consumo de banda da conexão ( vejam o erro no log abaixo )

Citar
Sun Jun  4 20:10:39 2006  THREADMGMT[t3011083184]: RRD: Data collection thread starting [p4388]
Sun Jun  4 20:10:39 2006  THREADMGMT[t3056047808]: ntop RUNSTATE: INITNONROOT(3)
Sun Jun  4 20:10:39 2006  Now running as requested user 'ntop' (113:113)
Sun Jun  4 20:10:39 2006  **WARNING** INIT: Unable to create pid file (/var/lib/ntop/ntop.pid)
Sun Jun  4 20:10:39 2006  Note: Reporting device initally set to 0 [eth0]
Sun Jun  4 20:10:39 2006  THREADMGMT[t3056047808]: ntop RUNSTATE: RUN(4)
Sun Jun  4 20:10:39 2006  THREADMGMT[t3001854896]: NPS(1): Started thread for network packet sniffing
Sun Jun  4 20:10:39 2006  THREADMGMT[t3001854896]: NPS(1,eth0): pcapDispatch thread starting [p4388]
Sun Jun  4 20:10:39 2006  THREADMGMT[t3001854896]: NPS(1,eth0): pcapDispatch thread running [p4388]
Sun Jun  4 20:10:39 2006  THREADMGMT[t3036552112]: SIH: Idle host scan thread running [p4388]
Sun Jun  4 20:10:39 2006  THREADMGMT[t3044944816]: SFP: Fingerprint scan thread running [p4388]
Sun Jun  4 20:10:49 2006  **ERROR** RRD: Disabled - unable to create base directory (err 13, /var/lib/ntop/rrd)

Para este último problema com o NTOP criei um tópico só para ele ( http://ubuntuforum-pt.org/index.php?topic=6826 )

São tantas coisas que deixaram de funcionar no Dapper que já estou pensado em voltar para o Breezy, pelo menos nele tudo funcionava bem, o Dapper está até parecendo que ainda está na versão Beta ??? Ou será que estou cometendo tantos erros nele e não estou conseguindo fazer nada funcionar direito ???  Ou tem uma terceira opção que pensei agora, isto pode ser problema com as configurações do Breezy que ao ser feito o upgrade para o Dapper não foram ajustadas convenientemente para a nova versão, ficando algumas sequelas que terão que ser ajustada adequadamente manualmente, imagino eu ( se for isso vou penar um pouco até conseguir resolver tudo ).


Antecipadamente agradeço toda ajuda.

11
Prezados senhores,

Atualizei o meu KUbuntu de 5.10 para 6.06 e depois disso o NTOP deixou de mostrar graficamente o tráfego de rede, vejam o log abaixo onde mostra o problema.

Citar

Sun Jun  4 00:14:21 2006  Now running as requested user 'ntop' (113:113)
Sun Jun  4 00:14:21 2006  **WARNING** INIT: Unable to create pid file (/var/lib/ntop/ntop.pid)
Sun Jun  4 00:14:21 2006  Note: Reporting device initally set to 0 [eth0]
Sun Jun  4 00:14:21 2006  THREADMGMT[t3056596672]: ntop RUNSTATE: RUN(4)
Sun Jun  4 00:14:21 2006  THREADMGMT[t3002403760]: NPS(1): Started thread for network packet sniffing
Sun Jun  4 00:14:21 2006  THREADMGMT[t3002403760]: NPS(1,eth0): pcapDispatch thread starting [p10801]
Sun Jun  4 00:14:21 2006  THREADMGMT[t3002403760]: NPS(1,eth0): pcapDispatch thread running [p10801]
Sun Jun  4 00:14:21 2006  THREADMGMT[t3037100976]: SIH: Idle host scan thread running [p10801]
Sun Jun  4 00:14:21 2006  THREADMGMT[t3045493680]: SFP: Fingerprint scan thread running [p10801]
Sun Jun  4 00:14:31 2006  **ERROR** RRD: Disabled - unable to create base directory (err 13, /var/lib/ntop/rrd)


Verifiquei que nada está sendo escrito nesse diretório pelo rrd .

O que pode estar acontecendo e o que eu posso fazer para corrigir este problema ?

Toda ajuda será muito bem vinda.

12
Sistema / Como definir para usar a hora local no relógio da CMOS ?
« Online: 18 de Fevereiro de 2006, 21:00 »
Prezados Senhores,

O meu KUbuntu 5.10, está configurado para que a hora da CMOS seja a hora UTC, mas eu gostaria que a hora da CMOS fosse a hora local ( mesmo só tendo o linux nessa máquina ).

Já mudei no /etc/default/rcS a opção UTC para no, mesmo assim hora do sistema ( e a dos logs ) continuou sendo a GMT . O que é que eu devo fazer para que tanto a hora do sistema como a hora da CMOS sejam a hora local. Não adianta a gambiarra de trocar manualmente, porque a hora do meu computador é atualizada pela internet e volta tudo de novo.


Toda ajuda será muito bem vinda.

Páginas: [1]