sudo apt-get install kdelibs5-dev libxine2-dev libmpeg2-4-dev libavformat-dev libswscale-dev cmake

cmake ../k9copy

make

sudo make install

#/bin/bash
case "$1" in
        --version)
                normalize --version | sed -e 's/normalize /normalize-audio /g'
                ;;
        *)
                normalize $*
                ;;
esac

ubuntu@ubuntu:~$ sudo fdisk -l

Disco /dev/sda: 250.0 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cilindros of 16065 * 512 = 8225280 bytes
Disk identifier: 0x00020330

Dispositivo Boot Início Fim Blocos Id Sistema
/dev/sda1   *           1       17653   141797691    7  HPFS ou NTFS
/dev/sda2           17654       30401   102398310   83  Linux

Disco /dev/hda: 40.0 GB, 40020664320 bytes
255 heads, 63 sectors/track, 4865 cylinders
Units = cilindros of 16065 * 512 = 8225280 bytes
Disk identifier: 0x0000a0c5

Dispositivo Boot Início Fim Blocos Id Sistema
/dev/hda1   *           1        2550    20482843+   7  HPFS ou NTFS
/dev/hda2            2551        4717    17406427+  83  Linux
/dev/hda3            4718        4865     1188810   82  Linux swap / Solaris
ubuntu@ubuntu:~$ sudo su
root@ubuntu:/home/ubuntu# reiserfsck --rebuild-tree /dev/sda2
reiserfsck 3.6.19 (2003 www.namesys.com)

*************************************************************
** Do not  run  the  program  with  --rebuild-tree  unless **
** something is broken and MAKE A BACKUP  before using it. **
** If you have bad sectors on a drive  it is usually a bad **
** idea to continue using it. Then you probably should get **
** a working hard drive, copy the file system from the bad **
** drive  to the good one -- dd_rescue is  a good tool for **
** that -- and only then run this program.                 **
** If you are using the latest reiserfsprogs and  it fails **
** please  email bug reports to reiserfs-list@namesys.com, **
** providing  as  much  information  as  possible --  your **
** hardware,  kernel,  patches,  settings,  all reiserfsck **
** messages  (including version),  the reiserfsck logfile, **
** check  the  syslog file  for  any  related information. **
** If you would like advice on using this program, support **
** is available  for $25 at  www.namesys.com/support.html. **
*************************************************************

Will rebuild the filesystem (/dev/sda2) tree
Will put log info to 'stdout'

Do you want to run this program?[N/Yes] (note need to type Yes if you do):Yes
Replaying journal..
Reiserfs journal '/dev/sda2' in blocks [18..8211]: 0 transactions replayed
###########
reiserfsck --rebuild-tree started at Sun Sep  7 22:53:25 2008
###########

Pass 0:
####### Pass 0 #######
Loading on-disk bitmap .. ok, 4669423 blocks marked used
Skipping 8992 blocks (super block, journal, bitmaps) 4660431 blocks will be read
0%....20%....40%....60%....                             left 937986, 16326 /sec
The problem has occurred looks like a hardware problem. If you have
bad blocks, we advise you to get a new hard drive, because once you
get one bad block  that the disk  drive internals  cannot hide from
your sight,the chances of getting more are generally said to become
much higher  (precise statistics are unknown to us), and  this disk
drive is probably not expensive enough  for you to you to risk your
time and  data on it.  If you don't want to follow that follow that
advice then  if you have just a few bad blocks,  try writing to the
bad blocks  and see if the drive remaps  the bad blocks (that means
it takes a block  it has  in reserve  and allocates  it for use for
of that block number).  If it cannot remap the block,  use badblock
option (-B) with  reiserfs utils to handle this block correctly.

bread: Cannot read the block (16101036): (Input/output error).

Cancelado (core dumped)
root@ubuntu:/home/ubuntu#