Fórum Ubuntu Linux - PT
Ambientes Gráficos (Ubuntu, Kubuntu, Xubuntu, Edubuntu) => Gnome => Tópico iniciado por: yarlos em 16 de Outubro de 2007, 18:48
-
Olá, Galera, usuario do Ubuntu:
-Estou usando o ubuntu 7.10, e conseguir ativar o compiz fusion, mas ativei o efeito cubo, mais só que não está funcionando o efeito cubo... ele tá só mudando de uma area de trabalho pra outra, parece que tem só duas areas de trabalho, o correto não seria quatro por efeito do cubo funcionar?????????? como faço pra colocar 4 area de trabalhos????????????
-
Se seu problema for realmente ter apenas duas áreas de trabalho:
http://ubuntuforum-br.org/index.php/topic,21999.msg124383.html#msg124383
-
Quando tento activar os «Desktop Effects» no 7.10 aparece-me a seguinte mensagem:
The Composite extension is not available
Como resolver? :S
-
Rapaz, não tenho certeza, mas você tem a seção abaixo no arquivo /etc/X11/xorg.conf??
Section "Extensions"
Option "Composite" "Enable"
EndSection
-
Rapaz, não tenho certeza, mas você tem a seção abaixo no arquivo /etc/X11/xorg.conf??
Section "Extensions"
Option "Composite" "Enable"
EndSection
ahn.... eu não tenho.... será por isso que aqui nenhum efeito funciona? (o velho problema das bordas - já tentei todas as alternativas do fórum... achei que fosse problema por ser 'beta')
segue abaixo meu xorg.conf:
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
Fontpath "/usr/share/fonts/X11/misc"
Fontpath "/usr/share/fonts/X11/cyrillic"
Fontpath "/usr/share/fonts/X11/100dpi/:unscaled"
Fontpath "/usr/share/fonts/X11/75dpi/:unscaled"
Fontpath "/usr/share/fonts/X11/Type1"
Fontpath "/usr/share/fonts/X11/100dpi"
Fontpath "/usr/share/fonts/X11/75dpi"
# path to defoma fonts
Fontpath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "extmod"
Load "freetype"
Load "int10"
Load "vbe"
Load "glx"
Load "v4l"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "abnt2"
Option "XkbLayout" "br"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection
Section "Device"
Identifier "nVidia Corporation NV34 [GeForce FX 5200]"
Boardname "nv"
Busid "PCI:1:0:0"
Driver "nvidia"
Screen 0
Option "AddARGBLGLXVisuals" "True"
EndSection
Section "Monitor"
Identifier "Monitor Genérico"
Vendorname "Samsung"
Modelname "Samsung SyncMaster 793S/793V/CM173G"
Horizsync 30-71
Vertrefresh 50-160
modeline "640x480@60" 25.2 640 656 752 800 480 490 492 525 -vsync -hsync
modeline "640x480@72" 31.5 640 664 704 832 480 489 491 520 -vsync -hsync
modeline "640x480@75" 31.5 640 656 720 840 480 481 484 500 -vsync -hsync
modeline "640x480@85" 36.0 640 696 752 832 480 481 484 509 -vsync -hsync
modeline "800x600@56" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
modeline "800x600@72" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
modeline "800x600@75" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
modeline "800x600@85" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync
modeline "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
modeline "832x624@75" 57.284 832 864 928 1152 624 625 628 667 -vsync -hsync
modeline "1024x768@85" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
modeline "1024x768@75" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
modeline "1024x768@70" 75.0 1024 1048 1184 1328 768 771 777 806 -vsync -hsync
modeline "1024x768@60" 65.0 1024 1048 1184 1344 768 771 777 806 -vsync -hsync
modeline "1024x768@43" 44.9 1024 1032 1208 1264 768 768 776 817 +hsync interlace +vsync
modeline "1152x864@75" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
modeline "1280x960@60" 102.1 1280 1360 1496 1712 960 961 964 994 -hsync +vsync
modeline "1280x1024@60" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
modeline "1400x1050@60" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -hsync +vsync
Gamma 1.0
EndSection
Section "Screen"
Identifier "Default Screen"
Device "nVidia Corporation NV34 [GeForce FX 5200]"
Monitor "Monitor Genérico"
Defaultdepth 24
SubSection "Display"
Depth 24
Virtual 1400 1050
Modes "1280x960@60" "1280x1024@60" "1152x864@75" "1400x1050@60" "1024x768@43" "1024x768@60" "1024x768@70" "1024x768@75" "1024x768@85" "832x624@75" "800x600@60" "800x600@85" "800x600@75" "800x600@72" "800x600@56" "640x480@85" "640x480@75" "640x480@72" "640x480@60"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
screen 0 "Default Screen" 0 0
Inputdevice "Generic Keyboard"
Inputdevice "Configured Mouse"
Inputdevice "stylus" "SendCoreEvents"
Inputdevice "cursor" "SendCoreEvents"
Inputdevice "eraser" "SendCoreEvents"
EndSection
Section "DRI"
Mode 0666
EndSection
Section "device" #
Identifier "device1"
Boardname "nv"
Busid "PCI:1:0:0"
Driver "nvidia"
Screen 1
EndSection
Section "screen" #
Identifier "screen1"
Device "device1"
Defaultdepth 24
Monitor "monitor1"
SubSection "Display"
Depth 24
Modes "640x480@60"
EndSubSection
EndSection
Section "monitor" #
Identifier "monitor1"
Vendorname "Plug 'n' Play"
Modelname "Plug 'n' Play"
modeline "640x480@60" 25.2 640 656 752 800 480 490 492 525 -vsync -hsync
Gamma 1.0
EndSection
Section "ServerFlags"
EndSection
Obrigado desde já...
Ps.: Esse é meu xorg.conf de casa (que desde que atualizei pro 7.10 não funcionou o cubo), depois eu posto o do trabalho (que funcionou e depois de algumas atualizações 'morreu')
--------------
Edit:
o que é fuçar..., tente o velho comando que não tinha tentado pelo terminal ainda:
compiz --replace &
que me retornou a mensagem:
felix@merovingian:~$ compiz --replace &
[1] 10932
felix@merovingian:~$ Checking for Xgl: not present.
Detected PCI ID for VGA: 01:00.0 0300: 10de:0322 (rev a1) (prog-if 00 [VGA])
Checking for texture_from_pixmap: present.
Checking for non power of two support: present.
Checking for Composite extension: present.
Comparing resolution (1280x960) to maximum 3D texture size (4096): Passed.
Checking for nVidia: present.
Checking for FBConfig: present.
Checking for Xgl: not present.
Starting emerald
/usr/bin/compiz.real (core) - Warn: No GLXFBConfig for depth 32
/usr/bin/compiz.real (core) - Warn: No GLXFBConfig for depth 32
/usr/bin/compiz.real (core) - Warn: No GLXFBConfig for depth 32
/usr/bin/compiz.real (video) - Warn: No 8 bit GLX pixmap format, disabling YV12 image format
/usr/bin/compiz.real (core) - Warn: No GLXFBConfig for depth 32
/usr/bin/compiz.real (wall) - Error: Couldn't create cairo context for switcher
/usr/bin/compiz.real (core) - Warn: No GLXFBConfig for depth 32
/usr/bin/compiz.real (wall) - Error: Couldn't create cairo context for switcher
/usr/bin/compiz.real (core) - Warn: No GLXFBConfig for depth 32
/usr/bin/compiz.real (wall) - Error: Couldn't create cairo context for switcher
/usr/bin/compiz.real (core) - Warn: No GLXFBConfig for depth 32
/usr/bin/compiz.real (wall) - Error: Couldn't create cairo context for switcher
/usr/bin/compiz.real (core) - Warn: No GLXFBConfig for depth 32
/usr/bin/compiz.real (resizeinfo) - Warn: Bind Pixmap to Texture failure
/usr/bin/compiz.real (core) - Warn: No GLXFBConfig for depth 32
/usr/bin/compiz.real (resizeinfo) - Warn: Bind Pixmap to Texture failure
/usr/bin/compiz.real (core) - Warn: No GLXFBConfig for depth 32
/usr/bin/compiz.real (core) - Warn: No GLXFBConfig for depth 32
/usr/bin/compiz.real (core) - Warn: No GLXFBConfig for depth 32
procurei então no synaptic por Xgl e fui apresentado ao:
xserver-xgl
instalei ele e mais algumas dependências que foram pedidas e finalmente pude habilitar os efeitos aqui com as bordas e tudo (quer dizer, quase tudo... ele tá travando quando tento ir para outra área de trabalho, me forçando ao ctrl +alt + tab, mas continuo fuçando um pco mais)
------------------------------
Edit II
Se eu rodo o
compiz --replace &
'na mão' eu alterno entre as áreas de trabalho normalmente, os efeitos ficam tudo belezinha, só me é apresentada essa mensagem no terminal:
felix@memphis:~$ compiz --replace &
[1] 15268
felix@memphis:~$ Checking for Xgl: present.
Checking for nVidia: not present.
Checking for Xgl: present.
Enabling Xgl with nVidia drivers...
Starting emerald
/usr/bin/compiz.real (video) - Warn: No 8 bit GLX pixmap format, disabling YV12 image format
mas se coloco o comando em "Sistema - Preferências - Sessões - Programas Iniciais" ele aparentemente não roda...
Ps2.: Os mais atenciosos devem ter notado que essa última mensagem é de outro micro (é o do trabalho, mas o de casa também retorna exatamente a mesma mensagem). A título de informação, segue abaixo o xorg.conf deste micro em que estou agora:
# xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "abnt2"
Option "XkbLayout" "br"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection
Section "Device"
Identifier "Placa de Vídeo Genérica"
Boardname "nv"
Busid "PCI:0:13:0"
Driver "nvidia"
Screen 0
EndSection
Section "Monitor"
Identifier "Monitor Genérico"
Modelname "Custom 1"
modeline "640x480@60" 25.2 640 656 752 800 480 490 492 525 -vsync -hsync
modeline "640x480@72" 31.5 640 664 704 832 480 489 491 520 -vsync -hsync
modeline "640x480@75" 31.5 640 656 720 840 480 481 484 500 -vsync -hsync
modeline "800x600@56" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
modeline "800x600@72" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
modeline "800x600@75" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
modeline "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
modeline "832x624@75" 57.284 832 864 928 1152 624 625 628 667 -vsync -hsync
modeline "1024x768@60" 65.0 1024 1048 1184 1344 768 771 777 806 -vsync -hsync
Gamma 1.0
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Placa de Vídeo Genérica"
Monitor "Monitor Genérico"
Defaultdepth 24
SubSection "Display"
Depth 24
Virtual 1024 768
Modes "1024x768@60" "832x624@75" "800x600@60" "800x600@75" "800x600@72" "800x600@56" "640x480@75" "640x480@72" "640x480@60"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
screen 0 "Default Screen" 0 0
Inputdevice "Generic Keyboard"
Inputdevice "Configured Mouse"
# Uncomment if you have a wacom tablet
# InputDevice "stylus" "SendCoreEvents"
# InputDevice "cursor" "SendCoreEvents"
# InputDevice "eraser" "SendCoreEvents"
EndSection
Section "Module"
Load "glx"
Load "v4l"
EndSection
Section "ServerFlags"
EndSection
Se alguem puder ajudar, agradeço desde já
-
Apesar do tópico Instalar Compiz-Fusion (O novo Compiz+Beryl) + Fusion-icon *Update .deb* (http://ubuntuforum-br.org/index.php/topic,21999) estar um pouco "grandinho" eu te recomendo a dar uma passada de olho nele. Afinal muitos dos erros (e os acertos também) estão lá.
Eu não uso o 7.10 (to ainda firme com o Feisty), então não sei se sou o mais indicado para te ajudar. No meu caso eu precisei adicionar aquele módulo ao arquivo /etc/X11/xorg.conf e para isto apenas editei ele e colei no final as linhas. Lembre-se que como é um arquivo de sistema você precisará usar o sudo para modificá-lo, conforme abaixo:
$ sudo gedit /etc/X11/xorg.conf
Também recomendo um backup do arquivo primeiro, afinal de contas a segurança esta sempre em primeiro lugar. Para o backup:
$ sudo cp /etc/X11/xorg.conf /etc/X11/xorg.conf.backup
-
Apesar do tópico Instalar Compiz-Fusion (O novo Compiz+Beryl) + Fusion-icon *Update .deb* (http://ubuntuforum-br.org/index.php/topic,21999) estar um pouco "grandinho" eu te recomendo a dar uma passada de olho nele. Afinal muitos dos erros (e os acertos também) estão lá.
Eu não uso o 7.10 (to ainda firme com o Feisty), então não sei se sou o mais indicado para te ajudar. No meu caso eu precisei adicionar aquele módulo ao arquivo /etc/X11/xorg.conf e para isto apenas editei ele e colei no final as linhas. Lembre-se que como é um arquivo de sistema você precisará usar o sudo para modificá-lo, conforme abaixo:
$ sudo gedit /etc/X11/xorg.conf
Também recomendo um backup do arquivo primeiro, afinal de contas a segurança esta sempre em primeiro lugar. Para o backup:
$ sudo cp /etc/X11/xorg.conf /etc/X11/xorg.conf.backup
clcampos...
você pode postar o seu xorg.conf para eu poder comparar aqui com o meu (só para tirar a dúvida).
Ps.: Oficialmente não faço parte da liga dos dinos, mas acho que por pura falta de atividade mesmo, afinal, meu primeiro computador foi um 'top de linha' 386 DX2..... hehehehe
-
Obrigado pela resposta deu certo o tutorail, agora funcionar o cubo...
-
Obrigado pela resposta deu certo o tutorail, agora funcionar o cubo...
yarlos que bom que funcionou.
Felix ta ai meu /etc/X11/xorg.conf. Tá bem gambiarrado, afinal tudo que eu acho acabo testando, algumas coisas eu deixo, outras eu tiro.
/etc/X11/xorg.conf
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
FontPath "/usr/share/fonts/X11/misc"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
# Load "dbe"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
Option "XkbOptions" "lv3:ralt_switch"
Option "XkbVariant" "intl"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Device"
Identifier "Intel Corporation Mobile Integrated Graphics Controller"
Driver "i810"
BusID "PCI:0:2:0"
#######################
####
### Linhas adicionadas porque placa onboard não aguenta reproduzir videos de alta resoluçao.
###
####
Option "VideoRam" "65536"
Option "CacheLines" "1980"
###
####
#######################
#############################################
## Por causa das BORDAS
#########################
Option "XAANoOffscreenPixmaps" "true"
Option "AddARGBGLXVisuals" "true"
#############################################
EndSection
Section "Monitor"
Identifier "Generic Monitor"
Option "DPMS" #"true"
HorizSync 28-64
VertRefresh 43-60
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Intel Corporation Mobile Integrated Graphics Controller"
#############################################
## Por causa das BORDAS
#########################
Option "AddARGBGLXVisuals" "true"
#############################################
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x800"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x800"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x800"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x800"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x800"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x800"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
Section "DRI"
Mode 0666
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
-
Grande clcampos...
cheguei em casa e acrescentei o
Sections "Extensions"
Option "Composite" "Enable"
EndSection
e tá tudo perfeito aqui...
Valeu mesmo.
-
Grande clcampos...
cheguei em casa e acrescentei o
Sections "Extensions"
Option "Composite" "Enable"
EndSection
e tá tudo perfeito aqui...
Valeu mesmo.
Que bom Felix, resolvemos os problemas de todos.
Acho que quem criou o tópico foi o yarlos, então poderia editar a primeira mensagem deste tópico, alterar o título, acrescentando RESOLVIDO a ele.
[]'s a todos!
Cristiano.
-
Rapaz, não tenho certeza, mas você tem a seção abaixo no arquivo /etc/X11/xorg.conf??
Section "Extensions"
Option "Composite" "Enable"
EndSection
Continua a não funcionar :S
A actualizar pelo apt-get reparei no seguinte erro:
W: GPG error: http://deb.opera.com etch Release: As seguintes assinaturas não puderam ser verificadas porque a chave pública não está disponível: NO_PUBKEY 033431536A423791
W: GPG error: http://ubuntu.beryl-project.org edgy Release: As seguintes assinaturas não puderam ser verificadas porque a chave pública não está disponível: NO_PUBKEY 3FF0DB166A7476EA
W: Você terá que executar apt-get update para corrigir estes problemas
E: Falhou o download de alguns ficheiros de índice, foram ignorados ou os antigos foram usados em seu lugar.
-
Rapaz, não tenho certeza, mas você tem a seção abaixo no arquivo /etc/X11/xorg.conf??
Section "Extensions"
Option "Composite" "Enable"
EndSection
Continua a não funcionar :S
A actualizar pelo apt-get reparei no seguinte erro:
W: GPG error: http://deb.opera.com etch Release: As seguintes assinaturas não puderam ser verificadas porque a chave pública não está disponível: NO_PUBKEY 033431536A423791
W: GPG error: http://ubuntu.beryl-project.org edgy Release: As seguintes assinaturas não puderam ser verificadas porque a chave pública não está disponível: NO_PUBKEY 3FF0DB166A7476EA
W: Você terá que executar apt-get update para corrigir estes problemas
E: Falhou o download de alguns ficheiros de índice, foram ignorados ou os antigos foram usados em seu lugar.
ramites posta ai seu arquivo /etc/X11/xorg.conf pra gente tentar analisar.
Agora o outro problema... me diz que repositórios são estes que estão dando erro? quando adicionou eles você também baixou as chaves públicas?
-
/etc/X11/xorg.conf
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
Fontpath "/usr/share/fonts/X11/misc"
Fontpath "/usr/share/fonts/X11/cyrillic"
Fontpath "/usr/share/fonts/X11/100dpi/:unscaled"
Fontpath "/usr/share/fonts/X11/75dpi/:unscaled"
Fontpath "/usr/share/fonts/X11/Type1"
Fontpath "/usr/share/fonts/X11/100dpi"
Fontpath "/usr/share/fonts/X11/75dpi"
# path to defoma fonts
Fontpath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "pt"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection
Section "Device"
Identifier "ATI Technologies Inc RV370 5B60 [Radeon X300 (PCIE)]"
Driver "fglrx"
Busid "PCI:1:0:0"
EndSection
Section "Monitor"
Identifier "StudioWorks"
Option "DPMS"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "ATI Technologies Inc RV370 5B60 [Radeon X300 (PCIE)]"
Monitor "StudioWorks"
Defaultdepth 24
SubSection "Display"
Depth 1
Modes "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
screen "Default Screen"
Inputdevice "Generic Keyboard"
Inputdevice "Configured Mouse"
Inputdevice "stylus" "SendCoreEvents"
Inputdevice "cursor" "SendCoreEvents"
Inputdevice "eraser" "SendCoreEvents"
EndSection
Section "DRI"
Mode 0666
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
Não percebi a tua pergunta, mas vou colocar aqui a o souces.list e o relatorio da actualização:
Sources.list:
# Automatically generated sources.list
# http://www.ubuntu-nl.org/source-o-matic/
#
# If you get GPG errors with this sources.list, locate the GPG key in this file
# and run these commands (where KEY is replaced with that key)
#
# gpg --keyserver hkp://subkeys.pgp.net --recv-keys KEY
# gpg --export --armor KEY | sudo apt-key add -
#
# If you don't know what to do with this file, read
# https://help.ubuntu.com/community/Repositories/CommandLine
# Ubuntu supported packages
# GPG key: 437D05B5
deb http://pt.archive.ubuntu.com/ubuntu gutsy main restricted
deb http://pt.archive.ubuntu.com/ubuntu gutsy-updates main restricted
deb http://security.ubuntu.com/ubuntu gutsy-security main restricted
# Ubuntu community supported packages
# GPG key: 437D05B5
deb http://pt.archive.ubuntu.com/ubuntu gutsy universe multiverse
deb http://pt.archive.ubuntu.com/ubuntu gutsy-updates universe multiverse
deb http://security.ubuntu.com/ubuntu gutsy-security universe multiverse
# Upstream Opera
# GPG key: 6A423791
deb http://deb.opera.com/opera etch non-free
# Upstream Beryl
# GPG key: ed8a569e
deb http://ubuntu.beryl-project.org/ edgy main-edgy
deb-src http://media.blutkind.org/xgl/ edgy main-edgy
#AUTOMATIX REPOS START
deb http://www.getautomatix.com/apt gutsy main
deb http://archive.canonical.com/ubuntu gutsy partner
deb http://archive.ubuntu.com/ubuntu gutsy-backports main restricted universe multiverse
#AUTOMATIX REPOS END
# Repositório Medibuntu
deb http://packages.medibuntu.org/ gutsy free non-free
# 465 fontes livres
deb http://ppa.launchpad.net/corenominal/ubuntu gutsy main
deb-src http://ppa.launchpad.net/corenominal/ubuntu gutsy main
# Skype
deb http://download.skype.com/linux/repos/debian/ stable non-free
Actualização:
Obter:1 http://packages.medibuntu.org gutsy Release.gpg [189B]
Ign http://packages.medibuntu.org gutsy/free Translation-pt_PT
Obter:2 http://archive.canonical.com gutsy Release.gpg [191B]
Ign http://archive.canonical.com gutsy/partner Translation-pt_PT
Obter:3 http://pt.archive.ubuntu.com gutsy Release.gpg [191B]
Ign http://pt.archive.ubuntu.com gutsy/main Translation-pt_PT
Ign http://pt.archive.ubuntu.com gutsy/restricted Translation-pt_PT
Ign http://pt.archive.ubuntu.com gutsy/universe Translation-pt_PT
Ign http://pt.archive.ubuntu.com gutsy/multiverse Translation-pt_PT
Obter:4 http://pt.archive.ubuntu.com gutsy-updates Release.gpg [191B]
Ign http://pt.archive.ubuntu.com gutsy-updates/main Translation-pt_PT
Obter:5 http://security.ubuntu.com gutsy-security Release.gpg [191B]
Ign http://security.ubuntu.com gutsy-security/main Translation-pt_PT
Ign http://packages.medibuntu.org gutsy/non-free Translation-pt_PT
Obter:6 http://packages.medibuntu.org feisty Release.gpg [189B]
Ign http://packages.medibuntu.org feisty/free Translation-pt_PT
Ign http://packages.medibuntu.org feisty/non-free Translation-pt_PT
Ign http://pt.archive.ubuntu.com gutsy-updates/restricted Translation-pt_PT
Ign http://pt.archive.ubuntu.com gutsy-updates/universe Translation-pt_PT
Ign http://pt.archive.ubuntu.com gutsy-updates/multiverse Translation-pt_PT
Obter:7 http://archive.canonical.com feisty-commercial Release.gpg [191B]
Ign http://archive.canonical.com feisty-commercial/main Translation-pt_PT
Atingido http://archive.canonical.com gutsy Release
Ign http://security.ubuntu.com gutsy-security/restricted Translation-pt_PT
Ign http://security.ubuntu.com gutsy-security/universe Translation-pt_PT
Ign http://security.ubuntu.com gutsy-security/multiverse Translation-pt_PT
Atingido http://security.ubuntu.com gutsy-security Release
Ign http://download.skype.com stable Release.gpg
Ign http://download.skype.com stable/non-free Translation-pt_PT
Obter:8 http://deb.opera.com etch Release.gpg [189B]
Ign http://deb.opera.com etch/non-free Translation-pt_PT
Atingido http://packages.medibuntu.org gutsy Release
Ign http://ppa.launchpad.net gutsy Release.gpg
Ign http://ppa.launchpad.net gutsy/main Translation-pt_PT
Atingido http://pt.archive.ubuntu.com gutsy Release
Atingido http://archive.canonical.com feisty-commercial Release
Ign http://download.skype.com stable Release
Obter:9 http://ubuntu.beryl-project.org edgy Release.gpg [191B]
Atingido http://security.ubuntu.com gutsy-security/main Packages
Obter:10 http://www.getautomatix.com gutsy Release.gpg [189B]
Ign http://www.getautomatix.com gutsy/main Translation-pt_PT
Atingido http://pt.archive.ubuntu.com gutsy-updates Release
Atingido http://ppa.launchpad.net gutsy Release
Atingido http://deb.opera.com etch Release
Err http://deb.opera.com etch Release
Ign http://archive.canonical.com gutsy/partner Packages
Atingido http://download.skype.com stable/non-free Packages
Ign http://ubuntu.beryl-project.org edgy/main-edgy Translation-pt_PT
Atingido http://packages.medibuntu.org feisty Release
Atingido http://security.ubuntu.com gutsy-security/restricted Packages
Atingido http://security.ubuntu.com gutsy-security/universe Packages
Atingido http://security.ubuntu.com gutsy-security/multiverse Packages
Atingido http://pt.archive.ubuntu.com gutsy/main Packages
Atingido http://pt.archive.ubuntu.com gutsy/restricted Packages
Atingido http://pt.archive.ubuntu.com gutsy/universe Packages
Atingido http://pt.archive.ubuntu.com gutsy/multiverse Packages
Ign http://ppa.launchpad.net gutsy/main Packages
Atingido http://archive.canonical.com feisty-commercial/main Packages
Atingido http://www.getautomatix.com gutsy Release
Atingido http://ubuntu.beryl-project.org edgy Release
Obter:11 http://deb.opera.com etch Release [866B]
Ign http://packages.medibuntu.org gutsy/free Packages
Ign http://packages.medibuntu.org gutsy/non-free Packages
Ign http://deb.opera.com etch Release
Atingido http://pt.archive.ubuntu.com gutsy-updates/main Packages
Atingido http://pt.archive.ubuntu.com gutsy-updates/restricted Packages
Atingido http://pt.archive.ubuntu.com gutsy-updates/universe Packages
Atingido http://pt.archive.ubuntu.com gutsy-updates/multiverse Packages
Ign http://ppa.launchpad.net gutsy/main Sources
Atingido http://archive.canonical.com gutsy/partner Packages
Ign http://packages.medibuntu.org feisty/free Packages
Ign http://packages.medibuntu.org feisty/non-free Packages
Ign http://packages.medibuntu.org feisty/free Sources
Ign http://packages.medibuntu.org feisty/non-free Sources
Ign http://deb.opera.com etch/non-free Packages
Atingido http://www.getautomatix.com gutsy/main Packages
Atingido http://ppa.launchpad.net gutsy/main Packages
Atingido http://packages.medibuntu.org gutsy/free Packages
Atingido http://ppa.launchpad.net gutsy/main Sources
Atingido http://deb.opera.com etch/non-free Packages
Atingido http://packages.medibuntu.org gutsy/non-free Packages
Atingido http://packages.medibuntu.org feisty/free Packages
Atingido http://packages.medibuntu.org feisty/non-free Packages
Atingido http://packages.medibuntu.org feisty/free Sources
Atingido http://packages.medibuntu.org feisty/non-free Sources
Ign http://media.blutkind.org edgy Release.gpg
Ign http://media.blutkind.org edgy Release
Ign http://media.blutkind.org edgy/main-edgy Sources
Err http://media.blutkind.org edgy/main-edgy Sources
301 Moved Permanently
Obter:12 http://archive.ubuntu.com gutsy-backports Release.gpg [191B]
Ign http://archive.ubuntu.com gutsy-backports/main Translation-pt_PT
Ign http://archive.ubuntu.com gutsy-backports/restricted Translation-pt_PT
Ign http://archive.ubuntu.com gutsy-backports/universe Translation-pt_PT
Ign http://archive.ubuntu.com gutsy-backports/multiverse Translation-pt_PT
Atingido http://archive.ubuntu.com gutsy-backports Release
Atingido http://archive.ubuntu.com gutsy-backports/main Packages
Atingido http://archive.ubuntu.com gutsy-backports/restricted Packages
Atingido http://archive.ubuntu.com gutsy-backports/universe Packages
Atingido http://archive.ubuntu.com gutsy-backports/multiverse Packages
Obtidos 1255B em 33s (38B/s)
Falha ao obter http://ubuntu.beryl-project.org/dists/edgy/Release Unable to find expected entry main-edgy/binary-i386/Packages in Meta-index file (malformed Release file?)
Falha ao obter http://media.blutkind.org/xgl/dists/edgy/main-edgy/source/Sources.gz 301 Moved Permanently
A Ler Listas de Pacotes... Pronto
W: GPG error: http://deb.opera.com etch Release: As seguintes assinaturas não puderam ser verificadas porque a chave pública não está disponível: NO_PUBKEY 033431536A423791
W: Você terá que executar apt-get update para corrigir estes problemas
E: Falhou o download de alguns ficheiros de índice, foram ignorados ou os antigos foram usados em seu lugar.
Ah, sou n00b, uso linux prai a um mes :D
-
(...)
A actualizar pelo apt-get reparei no seguinte erro:
W: GPG error: http://deb.opera.com etch Release: As seguintes assinaturas não puderam ser verificadas porque a chave pública não está disponível: NO_PUBKEY 033431536A423791
W: GPG error: http://ubuntu.beryl-project.org edgy Release: As seguintes assinaturas não puderam ser verificadas porque a chave pública não está disponível: NO_PUBKEY 3FF0DB166A7476EA
W: Você terá que executar apt-get update para corrigir estes problemas
E: Falhou o download de alguns ficheiros de índice, foram ignorados ou os antigos foram usados em seu lugar.
Seguindo a mensagem de erro você encontra algumas instruções:
http://deb.opera.com/
sudo gpg --keyserver subkeys.pgp.net --recv-key 6A423791
sudo gpg --fingerprint 6A423791
sudo gpg --armor --export 6A423791| sudo apt-key add -
****
Edit:
quanto à segunda:
http://ubuntu.beryl-project.org/index.html
wget http://ubuntu.beryl-project.org/root@lupine.me.uk.gpg -O- | sudo apt-key add -
-
Seguindo a mensagem de erro você encontra algumas instruções:
http://deb.opera.com/
Citar
sudo gpg --keyserver subkeys.pgp.net --recv-key 6A423791
sudo gpg --fingerprint 6A423791
sudo gpg --armor --export 6A423791| sudo apt-key add -
****
Edit:
quanto à segunda:
http://ubuntu.beryl-project.org/index.html
Citar
wget http://ubuntu.beryl-project.org/root@lupine.me.uk.gpg -O- | sudo apt-key add -
Você já executou estes comandos em negrito?
Para que adicionou eles? O problema no comando apt-get update é gerado devido a eles.
-
Falha ao obter http://ubuntu.beryl-project.org/dists/edgy/Release Unable to find expected entry main-edgy/binary-i386/Packages in Meta-index file (malformed Release file?)
Falha ao obter http://media.blutkind.org/xgl/dists/edgy/main-edgy/source/Sources.gz 301 Moved Permanently
-
Olha só, o porque não usa o Compiz-fusion no lugar do beryl? Ainda mais que ele será adotado junto com o Gutsy?
Eu removeria (ou comentaria) estes repositórios que estão dando problemas e leria este tópico aqui, que além de ensinar a instalar o compiz-fusion ainda ajuda a corrigir erros, já que já esta super bem documentado:
Instalar Compiz-Fusion (O novo Compiz+Beryl) + Fusion-icon *Update .deb* (http://ubuntuforum-br.org/index.php/topic,21999.0.html)
Só para constar, o tópico foi criado pelo iGama.