erro no lm-sensors

[Rwainder Miller]

esse lm-sensor nunca funcionaram direito acho que em nem um lugar. há algum tempo que tentava fazer isso funcionar recorrendo direto ao google,no final acabei desistindo pois não funciona de jeito nem um

[raz0r]

Uma pena mesmo ele não ter funcionado  . Aqui Intalar e configura-lo foi batata (levei uns 5 minutos), e funciona tudo perfeitamnete. 

[wandao.a]

Olá, também estou tentado instalar no meu pc, mas não consigo, até instalei com apt-get, rodei o comando sensors, mas ele deu mensagem que não há sensor instalado, eu dou o comando acpi -t ele mostra a temperatura corretamente, mas não consigo carregar o sensor. As mensagens que deram quando coloquei o sensor-detect foram:
# sensors-detect revision 4171 (2006-09-24 03:37:01 -0700)

This program will help you determine which kernel modules you need
to load to use lm_sensors most effectively. It is generally safe
and recommended to accept the default answers to all questions,
unless you know what you're doing.

We can start with probing for (PCI) I2C or SMBus adapters.
Do you want to probe now? (YES/no): y
Probing for PCI bus adapters...
Use driver `i2c-ali15x3' for device 0000:00:11.0: Acer Labs 1533/1543
Use driver `i2c-ali1535' for device 0000:00:11.0: Acer Labs 1535

We will now try to load each adapter module in turn.
Module `i2c-ali15x3' already loaded.
Module `i2c-ali1535' already loaded.
If you have undetectable or unsupported adapters, you can have them
scanned by manually loading the modules before running this script.

We are now going to do the I2C/SMBus adapter probings. Some chips may
be double detected; we choose the one with the highest confidence
value in that case.
If you found that the adapter hung after probing a certain address,
you can specify that address to remain unprobed.

Next adapter: SMBus ALI1535 adapter at 8040
Do you want to scan it? (YES/no/selectively): y
Client found at address 0x30
Client found at address 0x31
Client found at address 0x50
Handled by driver `eeprom' (already loaded), chip type `eeprom'
Client found at address 0x51
Handled by driver `eeprom' (already loaded), chip type `eeprom'

Some chips are also accessible through the ISA I/O ports. We have to
write to arbitrary I/O ports to probe them. This is usually safe though.
Yes, you do have ISA I/O ports even if you do not have any ISA slots!
Do you want to scan the ISA I/O ports? (YES/no): y
Probing for `National Semiconductor LM78' at 0x290...       No
Probing for `National Semiconductor LM78-J' at 0x290...     No
Probing for `National Semiconductor LM79' at 0x290...       No
Probing for `Winbond W83781D' at 0x290...                   No
Probing for `Winbond W83782D' at 0x290...                   No
Probing for `Winbond W83627HF' at 0x290...                  No
Probing for `Silicon Integrated Systems SIS5595'...         No
Probing for `VIA VT82C686 Integrated Sensors'...            No
Probing for `VIA VT8231 Integrated Sensors'...              No
Probing for `AMD K8 thermal sensors'...                     No
Probing for `IPMI BMC KCS' at 0xca0...                      No
Probing for `IPMI BMC SMIC' at 0xca8...                     No

Some Super I/O chips may also contain sensors. We have to write to
standard I/O ports to probe them. This is usually safe.
Do you want to scan for Super I/O sensors? (YES/no): y
Probing for Super-I/O at 0x2e/0x2f
Trying family `ITE'...                                      No
Trying family `National Semiconductor'...                   No
Trying family `SMSC'...                                     No
Trying family `VIA/Winbond/Fintek'...                       No
Probing for Super-I/O at 0x4e/0x4f
Trying family `ITE'...                                      No
Trying family `National Semiconductor'...                   No
Trying family `SMSC'...                                     No
Trying family `VIA/Winbond/Fintek'...                       No

Now follows a summary of the probes I have just done.
Just press ENTER to continue: y

Driver `eeprom' (should be inserted):
  Detects correctly:
  * Bus `SMBus ALI1535 adapter at 8040'
    Busdriver `i2c-ali1535', I2C address 0x50
    Chip `eeprom' (confidence: 6)
  * Bus `SMBus ALI1535 adapter at 8040'
    Busdriver `i2c-ali1535', I2C address 0x51
    Chip `eeprom' (confidence: 6)

  EEPROMs are *NOT* sensors! They are data storage chips commonly
  found on memory modules (SPD), in monitors (EDID), or in some
  laptops, for example.

I will now generate the commands needed to load the required modules.
Just press ENTER to continue: y

To make the sensors modules behave correctly, add these lines to
/etc/modules:

#----cut here----
# I2C adapter drivers
i2c-ali1535
# Chip drivers
eeprom
#----cut here----

Tentei aqui no meu sensors e esta dando o mesmo erro..Mas hoje mesmo eu já rodei ele...Isso está muito estranho. Parece que ele funciona, se eu rodar ele logo que entrar no sistema...Vou tentar resolver aqui e retorno para você...

Vlw

[jefcap]

ola...

eu estou querendo ver a temperatura do meu computador usando o lm-sensors do gdesklets mas nao estou conseguindo. Eu digitei sudo sensors-detect e dpois sudo sensors  e apareceu tudo certinho como mostrado abaixo:

k8temp-pci-00c3
Adapter: PCI adapter
Core0 Temp:
             +43°C

it8712-isa-0290
Adapter: ISA adapter
VCore 1:   +1.42 V  (min =  +0.00 V, max =  +4.08 V)   
VCore 2:   +0.00 V  (min =  +0.00 V, max =  +4.08 V)   ALARM
+3.3V:     +3.31 V  (min =  +0.00 V, max =  +4.08 V)   
+5V:       +5.08 V  (min =  +0.00 V, max =  +6.85 V)   
+12V:     +12.10 V  (min =  +0.00 V, max = +16.32 V)   
-12V:      -4.04 V  (min = -27.36 V, max =  +3.93 V)   
-5V:      -13.64 V  (min = -13.64 V, max =  +4.03 V)   ALARM
Stdby:     +4.92 V  (min =  +0.00 V, max =  +6.85 V)   
VBat:      +3.09 V
fan1:     4963 RPM  (min =    0 RPM, div =          
fan2:        0 RPM  (min =    0 RPM, div =          
fan3:     6026 RPM  (min =    0 RPM, div =          
M/B Temp:    +43°C  (low  =    -1°C, high =  +127°C)   sensor = thermistor   
CPU Temp:    +46°C  (low  =    -1°C, high =  +127°C)   sensor = thermistor   
Temp3:       +26°C  (low  =    -1°C, high =  +127°C)   sensor = thermistor



agora como eu faço p/ aparecer no lm-sensors??

valew