Continuação do dmesg:
[ 0.450944] alloc kstat_irqs on node -1
[ 0.450958] ohci_hcd 0000:00:03.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.450991] ohci_hcd 0000:00:03.1: OHCI Host Controller
[ 0.451069] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
[ 0.451117] ohci_hcd 0000:00:03.1: irq 21, io mem 0xcfffd000
[ 0.538357] usb usb3: configuration #1 chosen from 1 choice
[ 0.538415] hub 3-0:1.0: USB hub found
[ 0.538440] hub 3-0:1.0: 3 ports detected
[ 0.538550] alloc irq_desc for 22 on node -1
[ 0.538554] alloc kstat_irqs on node -1
[ 0.538567] ohci_hcd 0000:00:03.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 0.538602] ohci_hcd 0000:00:03.2: OHCI Host Controller
[ 0.538685] ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 4
[ 0.538738] ohci_hcd 0000:00:03.2: irq 22, io mem 0xcfffe000
[ 0.553470] ata1.00: ATA-7: SAMSUNG SP0411N, TW100-11, max UDMA/100
[ 0.553477] ata1.00: 78242976 sectors, multi 16: LBA48
[ 0.561151] ata1.01: HPA unlocked: 66055248 -> 78242976, native 78242976
[ 0.561165] ata1.01: ATA-7: SAMSUNG SP0411N, TW100-13, max UDMA/100
[ 0.561169] ata1.01: 78242976 sectors, multi 16: LBA48
[ 0.569425] ata1.00: configured for UDMA/100
[ 0.577567] ata1.01: configured for UDMA/100
[ 0.634746] usb usb4: configuration #1 chosen from 1 choice
[ 0.634807] hub 4-0:1.0: USB hub found
[ 0.634833] hub 4-0:1.0: 2 ports detected
[ 0.634937] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.635128] PNP: No PS/2 controller found. Probing ports directly.
[ 0.636909] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.636922] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.637218] mice: PS/2 mouse device common for all mice
[ 0.637444] rtc_cmos 00:02: RTC can wake from S4
[ 0.637547] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.637576] rtc0: alarms up to one month, 114 bytes nvram
[ 0.637743] device-mapper: uevent: version 1.0.3
[ 0.641030] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 0.644680] device-mapper: multipath: version 1.1.0 loaded
[ 0.644689] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.645076] EISA: Probing bus 0 at eisa.0
[ 0.645117] EISA: Detected 0 cards.
[ 0.645221] cpuidle: using governor ladder
[ 0.645225] cpuidle: using governor menu
[ 0.645893] TCP cubic registered
[ 0.646163] NET: Registered protocol family 10
[ 0.646858] lo: Disabled Privacy Extensions
[ 0.647326] NET: Registered protocol family 17
[ 0.647403] powernow-k8: Processor cpuid 681 not supported
[ 0.647448] Using IPI No-Shortcut mode
[ 0.647640] PM: Resume from disk failed.
[ 0.647665] registered taskstats version 1
[ 0.647928] Magic number: 11:181:827
[ 0.648081] rtc_cmos 00:02: setting system clock to 2011-01-21 08:50:50 UTC (1295599850)
[ 0.648087] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.648090] EDD information not available.
[ 0.728269] usb 1-2: new high speed USB device using ehci_hcd and address 2
[ 0.923939] usb 1-2: configuration #1 chosen from 1 choice
[ 0.988196] isapnp: No Plug & Play device found
[ 0.988547] scsi 0:0:0:0: Direct-Access ATA SAMSUNG SP0411N TW10 PQ: 0 ANSI: 5
[ 0.988874] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 0.989092] scsi 0:0:1:0: Direct-Access ATA SAMSUNG SP0411N TW10 PQ: 0 ANSI: 5
[ 0.989263] sd 0:0:1:0: Attached scsi generic sg1 type 0
[ 0.989517] sd 0:0:0:0: [sda] 78242976 512-byte logical blocks: (40.0 GB/37.3 GiB)
[ 0.989618] sd 0:0:0:0: [sda] Write Protect is off
[ 0.989623] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.989674] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.989953] sda: sda1 sda2 < sda5 sda6 sda7 >
[ 1.035250] sd 0:0:1:0: [sdb] 78242976 512-byte logical blocks: (40.0 GB/37.3 GiB)
[ 1.035368] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.035411] sd 0:0:1:0: [sdb] Write Protect is off
[ 1.035417] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.035466] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.035736] sdb: sdb1
[ 1.044204] sd 0:0:1:0: [sdb] Attached SCSI disk
[ 1.140579] ata2.00: ATAPI: HL-DT-ST RW/DVD GCC-4521B, 1.05, max UDMA/33
[ 1.156866] ata2.00: configured for UDMA/33
[ 1.160450] scsi 1:0:0:0: CD-ROM HL-DT-ST RW/DVD GCC-4521B 1.05 PQ: 0 ANSI: 5
[ 1.165211] sr0: scsi3-mmc drive: 52x/52x writer cd/rw xa/form2 cdda tray
[ 1.165220] Uniform CD-ROM driver Revision: 3.20
[ 1.165501] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.165631] sr 1:0:0:0: Attached scsi generic sg2 type 5
[ 1.212179] Freeing initrd memory: 13297k freed
[ 1.238368] Freeing unused kernel memory: 656k freed
[ 1.239802] Write protecting the kernel text: 4684k
[ 1.239850] Write protecting the kernel read-only data: 1840k
[ 1.289536] ramzswap: disk size set to 302880 kB
[ 1.304442] udev: starting version 151
[ 1.380149] usb 3-2: new low speed USB device using ohci_hcd and address 2
[ 1.453803] Adding 302876k swap on /dev/ramzswap0. Priority:100 extents:1 across:302876k SS
[ 1.593263] usb 3-2: configuration #1 chosen from 1 choice
[ 1.693200] Floppy drive(s): fd0 is 1.44M
[ 1.701664] vga16fb: initializing
[ 1.701680] vga16fb: mapped to 0xc00a0000
[ 1.701957] fb0: VGA16 VGA frame buffer device
[ 1.703979] Linux agpgart interface v0.103
[ 1.712258] FDC 0 is a post-1991 82077
[ 1.727660] sis900.c: v1.08.10 Apr. 2 2006
[ 1.727739] alloc irq_desc for 19 on node -1
[ 1.727743] alloc kstat_irqs on node -1
[ 1.727756] sis900 0000:00:04.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.728954] 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1.
[ 1.738217] 0000:00:04.0: Using transceiver found at address 1 as default
[ 1.790735] Initializing USB Mass Storage driver...
[ 1.790984] scsi2 : SCSI emulation for USB Mass Storage devices
[ 1.791355] usbcore: registered new interface driver usb-storage
[ 1.791361] USB Mass Storage support registered.
[ 1.791571] usb-storage: device found at 2
[ 1.791574] usb-storage: waiting for device to settle before scanning
[ 1.792626] eth0: SiS 900 PCI Fast Ethernet at 0xd800, IRQ 19, 00:11:5b:d2:89:50
[ 1.809111] agpgart-sis 0000:00:00.0: SiS chipset [1039/0741]
[ 1.852868] agpgart-sis 0000:00:00.0: AGP aperture is 64M @ 0xd0000000
[ 1.854916] usbcore: registered new interface driver hiddev
[ 1.906475] usb 2-2: new full speed USB device using ohci_hcd and address 2
[ 1.909889] Console: switching to colour frame buffer device 80x30
[ 1.913681] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:03.1/usb3/3-2/3-2:1.0/input/input3
[ 1.913883] generic-usb 0003:0458:003A.0001: input,hidraw0: USB HID v1.10 Mouse [Genius Optical Mouse] on usb-0000:00:03.1-2/input0
[ 1.913936] usbcore: registered new interface driver usbhid
[ 1.913942] usbhid: v2.6:USB HID core driver
[ 2.115536] usb 2-2: configuration #1 chosen from 1 choice
[ 2.118531] hub 2-2:1.0: USB hub found
[ 2.121328] hub 2-2:1.0: 4 ports detected
[ 2.429326] usb 2-2.1: new low speed USB device using ohci_hcd and address 3
[ 2.551481] usb 2-2.1: configuration #1 chosen from 1 choice
[ 2.562431] input: USB USB Keykoard as /devices/pci0000:00/0000:00:03.0/usb2/2-2/2-2.1/2-2.1:1.0/input/input4
[ 2.563222] generic-usb 0003:1C4F:0002.0002: input,hidraw1: USB HID v1.10 Keyboard [USB USB Keykoard] on usb-0000:00:03.0-2.1/input0
[ 2.756121] xor: automatically using best checksumming function: pIII_sse
[ 2.776008] pIII_sse : 1863.000 MB/sec
[ 2.776012] xor: using function: pIII_sse (1863.000 MB/sec)
[ 2.804686] device-mapper: dm-raid45: initialized v0.2594b
[ 3.141780] EXT4-fs (sda1): mounted filesystem with ordered data mode
[ 6.788338] usb-storage: device scan complete
[ 6.788919] scsi 2:0:0:0: Direct-Access SAMSUNG HM320JI PQ: 0 ANSI: 2 CCS
[ 6.789716] sd 2:0:0:0: Attached scsi generic sg3 type 0
[ 6.790510] sd 2:0:0:0: [sdc] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 6.791254] sd 2:0:0:0: [sdc] Write Protect is off
[ 6.791260] sd 2:0:0:0: [sdc] Mode Sense: 34 00 00 00
[ 6.791264] sd 2:0:0:0: [sdc] Assuming drive cache: write through
[ 6.792753] sd 2:0:0:0: [sdc] Assuming drive cache: write through
[ 6.792763] sdc: sdc1
[ 6.795254] sd 2:0:0:0: [sdc] Assuming drive cache: write through
[ 6.795261] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 12.568100] /build/buildd/linux-2.6.32/drivers/hid/usbhid/hid-core.c: usb_submit_urb(ctrl) failed
[ 12.568117] generic-usb 0003:1C4F:0002.0003: timeout initializing reports
[ 12.568339] input: USB USB Keykoard as /devices/pci0000:00/0000:00:03.0/usb2/2-2/2-2.1/2-2.1:1.1/input/input5
[ 12.568526] generic-usb 0003:1C4F:0002.0003: input,hidraw2: USB HID v1.10 Device [USB USB Keykoard] on usb-0000:00:03.0-2.1/input1
[ 12.645079] usb 2-2.2: new full speed USB device using ohci_hcd and address 4
[ 12.752631] usb 2-2.2: configuration #1 chosen from 1 choice
[ 13.026990] Adding 1464312k swap on /dev/sda6. Priority:-1 extents:1 across:1464312k
[ 13.074458] udev: starting version 151
[ 13.388290] lp: driver loaded but no devices found
[ 13.498227] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 14.099278] Linux video capture interface: v2.00
[ 14.123311] gspca: main v2.7.0 registered
[ 14.138388] gspca: probing 093a:2620
[ 14.162129] gspca: probe ok
[ 14.162161] gspca: probing 093a:2620
[ 14.162181] gspca: probing 093a:2620
[ 14.162214] usbcore: registered new interface driver pac7311
[ 14.162220] pac7311: registered
[ 14.233216] type=1505 audit(1295607064.083:2): operation="profile_load" pid=579 name="/sbin/dhclient3"
[ 14.233700] type=1505 audit(1295607064.083:3): operation="profile_load" pid=579 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 14.233984] type=1505 audit(1295607064.083:4): operation="profile_load" pid=579 name="/usr/lib/connman/scripts/dhclient-script"
[ 14.709183] usbcore: registered new interface driver snd-usb-audio
[ 14.802949] Intel ICH 0000:00:02.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 14.877145] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 14.896765] EXT4-fs (sda7): mounted filesystem with ordered data mode
[ 14.974468] nf_conntrack version 0.5.0 (9465 buckets, 37860 max)
[ 14.978079] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[ 14.978089] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
[ 14.978093] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[ 15.632030] intel8x0_measure_ac97_clock: measured 53901 usecs (2592 samples)
[ 15.632038] intel8x0: clocking to 48000
[ 16.152726] type=1505 audit(1295607066.003:5): operation="profile_load" pid=838 name="/usr/share/gdm/guest-session/Xsession"
[ 16.159721] type=1505 audit(1295607066.007:6): operation="profile_replace" pid=841 name="/sbin/dhclient3"
[ 16.189613] type=1505 audit(1295607066.039:7): operation="profile_replace" pid=841 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 16.189914] type=1505 audit(1295607066.039:8): operation="profile_replace" pid=841 name="/usr/lib/connman/scripts/dhclient-script"
[ 16.296440] type=1505 audit(1295607066.147:9): operation="profile_load" pid=843 name="/usr/bin/evince"
[ 16.339393] type=1505 audit(1295607066.187:10): operation="profile_load" pid=843 name="/usr/bin/evince-previewer"
[ 16.381748] type=1505 audit(1295607066.231:11): operation="profile_load" pid=843 name="/usr/bin/evince-thumbnailer"
[ 18.352934] eth0: Media Link On 100mbps full-duplex
[ 20.034618] ppdev: user-space parallel port driver
[ 27.344016] eth0: no IPv6 routers present
[ 53.967453] lo: Disabled Privacy Extensions
[ 98.344462] lo: Disabled Privacy Extensions
[ 2196.170536] lo: Disabled Privacy Extensions
[10907.977678] nf_conntrack: falling back to vmalloc.
[10907.983967] lo: Disabled Privacy Extensions
[11291.577073] usb 2-2.3: new full speed USB device using ohci_hcd and address 5
[11291.700304] usb 2-2.3: configuration #1 chosen from 1 choice
[11292.383120] usblp0: USB Bidirectional printer dev 5 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11
[11292.383174] usbcore: registered new interface driver usblp
[11293.590286] usb 2-2.3: usbfs: interface 1 claimed by usblp while 'usb' sets config #1
[11321.033348] usblp0: removed
[14142.513198] usb 2-2.4: new full speed USB device using ohci_hcd and address 6
[14142.614179] usb 2-2.4: not running at top speed; connect to a high speed hub
[14142.638443] usb 2-2.4: configuration #1 chosen from 1 choice
[14142.656389] scsi3 : SCSI emulation for USB Mass Storage devices
[14142.661938] usb-storage: device found at 6
[14142.661943] usb-storage: waiting for device to settle before scanning
[14147.662696] usb-storage: device scan complete
[14147.669655] scsi 3:0:0:0: CD-ROM Motorola XT300 ffff PQ: 0 ANSI: 2
[14147.695612] sr1: scsi3-mmc drive: 0x/0x caddy
[14147.695931] sr 3:0:0:0: Attached scsi CD-ROM sr1
[14147.696116] sr 3:0:0:0: Attached scsi generic sg4 type 5
[14148.536523] usb 2-2.4: USB disconnect, address 6
[14149.329424] usb 2-2.4: new full speed USB device using ohci_hcd and address 7
[14149.430391] usb 2-2.4: not running at top speed; connect to a high speed hub
[14149.455643] usb 2-2.4: configuration #1 chosen from 1 choice
[14149.475475] scsi4 : SCSI emulation for USB Mass Storage devices
[14149.485097] usb-storage: device found at 7
[14149.485103] usb-storage: waiting for device to settle before scanning
[14154.486915] usb-storage: device scan complete
[14154.495882] scsi 4:0:0:0: Direct-Access Motorola XT300 ffff PQ: 0 ANSI: 2
[14154.501306] sd 4:0:0:0: Attached scsi generic sg4 type 0
[14154.539912] sd 4:0:0:0: [sdd] Attached SCSI removable disk
[14298.097250] usb 2-2.4: USB disconnect, address 7
[14313.021535] usb 2-2.4: new full speed USB device using ohci_hcd and address 8
[14313.122515] usb 2-2.4: not running at top speed; connect to a high speed hub
[14313.130510] usb 2-2.4: config 1 has an invalid interface number: 0 but max is -1
[14313.130517] usb 2-2.4: config 1 has 1 interface, different from the descriptor's value: 0
[14313.146773] usb 2-2.4: configuration #1 chosen from 1 choice
[14313.158893] scsi5 : SCSI emulation for USB Mass Storage devices
[14313.159204] usb-storage: device found at 8
[14313.159207] usb-storage: waiting for device to settle before scanning
[14318.159029] usb-storage: device scan complete
[14318.165993] scsi 5:0:0:0: CD-ROM Motorola XT300 ffff PQ: 0 ANSI: 2
[14318.193953] sr1: scsi3-mmc drive: 0x/0x caddy
[14318.194283] sr 5:0:0:0: Attached scsi CD-ROM sr1
[14318.194448] sr 5:0:0:0: Attached scsi generic sg4 type 5
[14318.287921] usb 2-2.4: USB disconnect, address 8
[14318.321848] scsi 5:0:0:0: rejecting I/O to dead device
[14318.321895] scsi 5:0:0:0: rejecting I/O to dead device
[14318.321990] scsi 5:0:0:0: rejecting I/O to dead device
[14319.165834] usb 2-2.4: new full speed USB device using ohci_hcd and address 9
[14319.266804] usb 2-2.4: not running at top speed; connect to a high speed hub
[14319.291076] usb 2-2.4: configuration #1 chosen from 1 choice
[14319.315454] scsi6 : SCSI emulation for USB Mass Storage devices
[14319.321010] usb-storage: device found at 9
[14319.321015] usb-storage: waiting for device to settle before scanning
[14324.322328] usb-storage: device scan complete
[14324.331287] scsi 6:0:0:0: Direct-Access Motorola XT300 ffff PQ: 0 ANSI: 2
[14324.336892] sd 6:0:0:0: Attached scsi generic sg4 type 0
[14324.389298] sd 6:0:0:0: [sdd] Attached SCSI removable disk
[14345.675770] usb 2-2.4: USB disconnect, address 9
[14346.585676] usb 2-2.4: new full speed USB device using ohci_hcd and address 10
[14346.686645] usb 2-2.4: not running at top speed; connect to a high speed hub
[14346.710913] usb 2-2.4: configuration #1 chosen from 1 choice
[14346.736046] scsi7 : SCSI emulation for USB Mass Storage devices
[14346.741603] usb-storage: device found at 10
[14346.741609] usb-storage: waiting for device to settle before scanning
[14351.743167] usb-storage: device scan complete
[14351.750141] scsi 7:0:0:0: Direct-Access Motorola XT300 ffff PQ: 0 ANSI: 2
[14351.755649] sd 7:0:0:0: Attached scsi generic sg4 type 0
[14351.782373] sd 7:0:0:0: [sdd] 3842048 512-byte logical blocks: (1.96 GB/1.83 GiB)
[14351.788118] sd 7:0:0:0: [sdd] Write Protect is off
[14351.788129] sd 7:0:0:0: [sdd] Mode Sense: 03 00 00 00
[14351.788135] sd 7:0:0:0: [sdd] Assuming drive cache: write through
[14351.817065] sd 7:0:0:0: [sdd] Assuming drive cache: write through
[14351.817078] sdd: sdd1
[14351.859061] sd 7:0:0:0: [sdd] Assuming drive cache: write through
[14351.859075] sd 7:0:0:0: [sdd] Attached SCSI removable disk
rodrigo@rodrigo-desktop:~$