Ola Amigos
Eu fiz uma configuração do meu roteador tp-link.Agora não consigo ter acesso a ele
pelo browser usando 192.168.1.1.Eu não tenho muito Experiência.Aqui está a configuração que eu usei
O brigado
config dnsmasq
option domainneeded 1
option boguspriv 1
option filterwin2k 0 # enable for dial on demand
option localise_queries 1
option rebind_protection 1 # disable if upstream must serve RFC1918 addresses
option rebind_localhost 1 # enable for RBL checking and similar services
#list rebind_domain example.lan # whitelist RFC1918 responses for domains
option local '/lan/'
option domain 'lan'
option expandhosts 1
option nonegcache 0
option authoritative 1
option readethers 1
option leasefile '/tmp/dhcp.leases'
option resolvfile '/tmp/resolv.conf.auto'
#list server '/mycompany.local/1.2.3.4'
#option nonwildcard 1
#list interface br-lan
#list notinterface lo
#list bogusnxdomain '64.94.110.11'
config dhcp wifi_sta
option interface wifi_sta
option start 100
option limit 150
option leasetime 12h
#config dhcp wan
# option interface wan
# option ignore 1
config interface 'loopback'
option ifname 'lo'
option proto 'static'
option ipaddr '127.0.0.1'
option netmask '255.0.0.0'
config interface 'wifi_sta'
option ifname 'radio0'
option proto 'static'
option ipaddr '192.168.1.120'
option netmask '255.255.255.0'
option gateway '192.168.1.1'
option dns '192.168.1.1'
config interface 'lan'
option ifname 'eth0'
option proto 'static'
option ipaddr '192.168.0.1'
option netmask '255.255.255.0'
config wifi-device 'radio0'
option type 'mac80211'
option channel 'auto'
option phy 'phy0'
option hwmode '11ng'
option htmode 'HT20'
list ht_capab 'SHORT-GI-20'
list ht_capab 'SHORT-GI-40'
list ht_capab 'RX-STBC1'
list ht_capab 'DSSS_CCK-40'
config wifi-iface 'wifi_sta'
option device 'radio0'
option network 'wifi_sta'
option mode 'ap'
option encryption 'psk2+tkip+aes'
option ssid 'rovader'
option key 'deadstar'