dificuldades com microfone imbutido num ultrabook

[dicadavid]

instalei num asus x550ea o linux mint 17 cinnamon x64, em dualboot com ruimdows.

o microfone so passa a funcionar depois que inicio uma vez o ruimdows, posso reiniciar e entrar que funcionar.

tem algum jeito de deixa-lo funcionando sem precisar de iniciar o ruimdows antes?

[rihoem]

Já vi um caso onde uma peça de hardware (era um controlador de acesso ao disco) estava desativado no BIOS, e o windows sabia o truque de inicia-lo mesmo assim, mas o Linux não.

Eu tentaria fuçar nobios para ver se há alguma opção mencionando o microfone. Talvez ele esteja desativado e só ao iniciar o windows ele seja ligado, permitindo que seja usado no Linux.

[dicadavid]

procurei ja na bios e não vi nada la que indicasse o microfone. todos os dispositivos estão habilitados.

No ruimdows, tive que instalar o driver proprietário do som para ele funcionar.  
Nunca ouvi falar de instalar driver proprietario de som. Em gerenciar drivers, somente apareceu minha placa de video para rodar os jogos da steam.

Alguem ja teve este problema?

[rihoem]

Talvez seja só um problema de configuração do pulseaudio.

Quando estiver no Linux, poste o resultado do comando "lspci" quando o microfone está funcionando e quando não estiver, para vermos a diferença e investigar pelo modelo da placa de som.

[dicadavid]

com microfone funcionando:

00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 16h Processor Root Complex
00:01.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Kabini [Radeon HD 8330]
00:01.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Device 9840
00:02.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 16h Processor Function 0
00:02.2 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 16h Processor Functions 5:1
00:02.3 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 16h Processor Functions 5:1
00:10.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB XHCI Controller (rev 01)
00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode] (rev 40)
00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 39)
00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 39)
00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 39)
00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 39)
00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller (rev 3a)
00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD] FCH Azalia Controller (rev 02)
00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge (rev 11)
00:14.7 SD Host controller: Advanced Micro Devices, Inc. [AMD] FCH SD Flash Controller (rev 01)
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 16h Processor Function 0
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 16h Processor Function 1
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 16h Processor Function 2
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 16h Processor Function 3
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 16h Processor Function 4
00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 16h Processor Function 5
01:00.0 Network controller: Qualcomm Atheros AR9485 Wireless Network Adapter (rev 01)
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 10)

sem  funcionar o microfone:
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 16h Processor Root Complex
00:01.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Kabini [Radeon HD 8330]
00:01.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Device 9840
00:02.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 16h Processor Function 0
00:02.2 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 16h Processor Functions 5:1
00:02.3 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 16h Processor Functions 5:1
00:10.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB XHCI Controller (rev 01)
00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode] (rev 40)
00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 39)
00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 39)
00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 39)
00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 39)
00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller (rev 3a)
00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD] FCH Azalia Controller (rev 02)
00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge (rev 11)
00:14.7 SD Host controller: Advanced Micro Devices, Inc. [AMD] FCH SD Flash Controller (rev 01)
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 16h Processor Function 0
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 16h Processor Function 1
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 16h Processor Function 2
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 16h Processor Function 3
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 16h Processor Function 4
00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 16h Processor Function 5
01:00.0 Network controller: Qualcomm Atheros AR9485 Wireless Network Adapter (rev 01)
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 10)

[Tota]

Olá

Só para ajudar, microfone não é pci, USB nem nada. Ele é um canal de som da placa de som.

Resultados do arquivo de log dmesg sim, informa como esta o estado do microfone.

[]'s

[dicadavid]

Sem funcionar microfone:
[    0.520881] pci 0000:00:18.0: [1022:1530] type 00 class 0x060000
[    0.521101] pci 0000:00:18.1: [1022:1531] type 00 class 0x060000
[    0.521316] pci 0000:00:18.2: [1022:1532] type 00 class 0x060000
[    0.521532] pci 0000:00:18.3: [1022:1533] type 00 class 0x060000
[    0.521762] pci 0000:00:18.4: [1022:1534] type 00 class 0x060000
[    0.521980] pci 0000:00:18.5: [1022:1535] type 00 class 0x060000
[    0.522376] pci 0000:01:00.0: [168c:0032] type 00 class 0x028000
[    0.522436] pci 0000:01:00.0: reg 0x10: [mem 0xfea00000-0xfea7ffff 64bit]
[    0.522528] pci 0000:01:00.0: reg 0x30: [mem 0xfea80000-0xfea8ffff pref]
[    0.522645] pci 0000:01:00.0: supports D1 D2
[    0.522653] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.527972] pci 0000:00:02.2: PCI bridge to [bus 01]
[    0.528004] pci 0000:00:02.2:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.528377] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[    0.528460] pci 0000:02:00.0: reg 0x10: [io  0xe000-0xe0ff]
[    0.528589] pci 0000:02:00.0: reg 0x18: [mem 0xfe904000-0xfe904fff 64bit]
[    0.528670] pci 0000:02:00.0: reg 0x20: [mem 0xfe900000-0xfe903fff 64bit]
[    0.529018] pci 0000:02:00.0: supports D1 D2
[    0.529026] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.529177] pci 0000:02:00.0: System wakeup disabled by ACPI
[    0.536007] pci 0000:00:02.3: PCI bridge to [bus 02]
[    0.536035] pci 0000:00:02.3:   bridge window [io  0xe000-0xefff]
[    0.536047] pci 0000:00:02.3:   bridge window [mem 0xfe900000-0xfe9fffff]
[    0.536102] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
[    0.545284] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 *11 14 15)
[    0.545546] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 *11 14 15)
[    0.545803] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 14 15)
[    0.546058] ACPI: PCI Interrupt Link [LNKD] (IRQs *4 7 10 11 14 15)
[    0.546272] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 *11 14 15)
[    0.546450] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 *10 11 14 15)
[    0.546625] ACPI: PCI Interrupt Link [LNKG] (IRQs *4 7 10 11 14 15)
[    0.546803] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0
[    0.548513] ACPI: Enabled 1 GPEs in block 00 to 1F
[    0.548542] ACPI: \_SB_.PCI0: notify handler is installed
[    0.548817] Found 1 acpi root devices
[    0.549105] ACPI : EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
[    0.549540] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[    0.549566] vgaarb: loaded
[    0.549571] vgaarb: bridge control possible 0000:00:01.0
[    0.550227] SCSI subsystem initialized
[    0.550485] libata version 3.00 loaded.
[    0.550559] ACPI: bus type USB registered
[    0.550627] usbcore: registered new interface driver usbfs
[    0.550664] usbcore: registered new interface driver hub
[    0.550770] usbcore: registered new device driver usb
[    0.551213] PCI: Using ACPI for IRQ routing
[    0.562042] PCI: pci_cache_line_size set to 64 bytes
[    0.562165] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[    0.562173] e820: reserve RAM buffer [mem 0x9d0f0000-0x9fffffff]
[    0.562182] e820: reserve RAM buffer [mem 0x9d363000-0x9fffffff]
[    0.562189] e820: reserve RAM buffer [mem 0x9e9b8000-0x9fffffff]
[    0.562196] e820: reserve RAM buffer [mem 0x9eb13000-0x9fffffff]
[    0.562202] e820: reserve RAM buffer [mem 0x9f081000-0x9fffffff]
[    0.562208] e820: reserve RAM buffer [mem 0x9f400000-0x9fffffff]
[    0.562214] e820: reserve RAM buffer [mem 0x13f000000-0x13fffffff]
[    0.562554] NetLabel: Initializing
[    0.562562] NetLabel:  domain hash size = 128
[    0.562566] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.562619] NetLabel:  unlabeled traffic allowed by default
[    0.562844] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.562858] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.565064] Switched to clocksource hpet
[    0.583782] AppArmor: AppArmor Filesystem Enabled
[    0.583886] pnp: PnP ACPI init
[    0.583937] ACPI: bus type PNP registered
[    0.584381] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[    0.584397] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.584683] system 00:01: [mem 0xa0000000-0xbfffffff] has been reserved
[    0.584696] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.584889] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.584937] pnp 00:03: [dma 4]
[    0.585008] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.585159] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.585253] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.585453] system 00:06: [io  0x04d0-0x04d1] has been reserved
[    0.585466] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.585573] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.585837] pnp 00:08: Plug and Play ACPI device, IDs ETD0108 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
[    0.586011] pnp 00:09: Plug and Play ACPI device, IDs ATK3001 PNP030b (active)
[    0.586892] system 00:0a: [io  0x04d0-0x04d1] has been reserved
[    0.586902] system 00:0a: [io  0x040b] has been reserved
[    0.586911] system 00:0a: [io  0x04d6] has been reserved
[    0.586920] system 00:0a: [io  0x0c00-0x0c01] has been reserved
[    0.586929] system 00:0a: [io  0x0c14] has been reserved
[    0.586937] system 00:0a: [io  0x0c50-0x0c51] has been reserved
[    0.586946] system 00:0a: [io  0x0c52] has been reserved
[    0.586954] system 00:0a: [io  0x0c6c] has been reserved
[    0.586962] system 00:0a: [io  0x0c6f] has been reserved
[    0.586971] system 00:0a: [io  0x0cd0-0x0cd1] has been reserved
[    0.586980] system 00:0a: [io  0x0cd2-0x0cd3] has been reserved
[    0.586988] system 00:0a: [io  0x0cd4-0x0cd5] has been reserved
[    0.586997] system 00:0a: [io  0x0cd6-0x0cd7] has been reserved
[    0.587005] system 00:0a: [io  0x0cd8-0x0cdf] has been reserved
[    0.587015] system 00:0a: [io  0x0800-0x089f] could not be reserved
[    0.587024] system 00:0a: [io  0x0900-0x090f] has been reserved
[    0.587033] system 00:0a: [io  0x0910-0x091f] has been reserved
[    0.587042] system 00:0a: [io  0xfe00-0xfefe] has been reserved
[    0.587053] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.587063] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.587073] system 00:0a: [mem 0xfed80000-0xfed8ffff] has been reserved
[    0.587082] system 00:0a: [mem 0xfed61000-0xfed70fff] has been reserved
[    0.587092] system 00:0a: [mem 0xfec10000-0xfec10fff] has been reserved
[    0.587101] system 00:0a: [mem 0xfed00000-0xfed00fff] has been reserved
[    0.587110] system 00:0a: [mem 0xff000000-0xffffffff] has been reserved
[    0.587122] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.594882] pnp 00:0b: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.594916] pnp: PnP ACPI: found 12 devices
[    0.594923] ACPI: bus type PNP unregistered
[    0.606890] pci 0000:00:02.2: PCI bridge to [bus 01]
[    0.606907] pci 0000:00:02.2:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.606926] pci 0000:00:02.3: PCI bridge to [bus 02]
[    0.606936] pci 0000:00:02.3:   bridge window [io  0xe000-0xefff]
[    0.606948] pci 0000:00:02.3:   bridge window [mem 0xfe900000-0xfe9fffff]
[    0.606968] pci_bus 0000:00: resource 4 [io  0x0000-0x03af]
[    0.606976] pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7]
[    0.606984] pci_bus 0000:00: resource 6 [io  0x03b0-0x03df]
[    0.606992] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff]
[    0.607000] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
[    0.607008] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
[    0.607015] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff]
[    0.607024] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
[    0.607032] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
[    0.607039] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff]
[    0.607146] NET: Registered protocol family 2
[    0.607698] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.608094] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.608397] TCP: Hash tables configured (established 32768 bind 32768)
[    0.608480] TCP: reno registered
[    0.608507] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.608582] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.608830] NET: Registered protocol family 1
[    0.608876] pci 0000:00:01.0: Boot video device
[    0.805632] PCI: CLS 64 bytes, default 64
[    0.805893] Trying to unpack rootfs image as initramfs...

[dicadavid]

[    2.448346] Freeing initrd memory: 26188K (ffff880034cca000 - ffff88003665d000)
[    2.448370] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    2.448380] software IO TLB [mem 0x990f0000-0x9d0f0000] (64MB) mapped at [ffff8800990f0000-ffff88009d0effff]
[    2.449267] perf: AMD NB counters detected
[    2.449288] perf: AMD L2I counters detected
[    2.449378] LVT offset 0 assigned for vector 0x400
[    2.449450] perf: AMD IBS detected (0x000000ff)
[    2.449629] microcode: CPU0: patch_level=0x0700010b
[    2.449653] microcode: CPU1: patch_level=0x0700010b
[    2.449668] microcode: CPU2: patch_level=0x0700010b
[    2.449690] microcode: CPU3: patch_level=0x0700010b
[    2.449934] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    2.449942] Scanning for low memory corruption every 60 seconds
[    2.450839] Initialise system trusted keyring
[    2.451018] audit: initializing netlink socket (disabled)
[    2.451074] type=2000 audit(1405789481.332:1): initialized
[    2.552212] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    2.557166] VFS: Disk quotas dquot_6.5.2
[    2.557344] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    2.559127] fuse init (API version 7.22)
[    2.559395] msgmni has been set to 6646
[    2.559582] Key type big_key registered
[    2.561064] Key type asymmetric registered
[    2.561072] Asymmetric key parser 'x509' registered
[    2.561191] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    2.561344] io scheduler noop registered
[    2.561351] io scheduler deadline registered (default)
[    2.561445] io scheduler cfq registered
[    2.562118] pcieport 0000:00:02.2: irq 72 for MSI/MSI-X
[    2.562490] pcieport 0000:00:02.3: irq 73 for MSI/MSI-X
[    2.562720] pcieport 0000:00:02.2: Signaling PME through PCIe PME interrupt
[    2.562730] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[    2.562741] pcie_pme 0000:00:02.2:pcie01: service driver pcie_pme loaded
[    2.562799] pcieport 0000:00:02.3: Signaling PME through PCIe PME interrupt
[    2.562808] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[    2.562819] pcie_pme 0000:00:02.3:pcie01: service driver pcie_pme loaded
[    2.562865] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    2.562921] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    2.563056] vesafb: mode is 1366x768x32, linelength=5632, pages=0
[    2.563061] vesafb: scrolling: redraw
[    2.563069] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[    2.564069] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90010780000, using 4224k, total 4224k
[    2.728558] Console: switching to colour frame buffer device 170x48
[    2.892408] fb0: VESA VGA frame buffer device
[    2.892480] ipmi message handler version 39.2
[    2.898009] ACPI: AC Adapter [AC0] (off-line)
[    2.898441] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    2.898456] ACPI: Power Button [PWRB]
[    2.898607] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[    2.909809] ACPI: Lid Switch [LID]
[    2.910039] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[    2.910057] ACPI: Sleep Button [SLPB]
[    2.910189] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    2.910199] ACPI: Power Button [PWRF]
[    2.910474] ACPI: acpi_idle registered with cpuidle
[    2.913728] thermal LNXTHERM:00: registered as thermal_zone0
[    2.913736] ACPI: Thermal Zone [THRM] (51 C)
[    2.913824] GHES: HEST is not enabled!
[    2.914222] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    2.921075] Linux agpgart interface v0.103
[    2.927508] brd: module loaded
[    2.930236] loop: module loaded
[    2.931663] libphy: Fixed MDIO Bus: probed
[    2.932101] tun: Universal TUN/TAP device driver, 1.6
[    2.932108] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    2.932277] PPP generic driver version 2.4.2
[    2.932449] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.932466] ehci-pci: EHCI PCI platform driver
[    2.933181] ehci-pci 0000:00:12.2: EHCI Host Controller
[    2.933205] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[    2.933223] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    2.933270] ehci-pci 0000:00:12.2: debug port 1
[    2.933391] ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb6d000
[    2.945448] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    2.945697] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.945708] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.945716] usb usb1: Product: EHCI Host Controller
[    2.945724] usb usb1: Manufacturer: Linux 3.13.0-24-generic ehci_hcd
[    2.945731] usb usb1: SerialNumber: 0000:00:12.2
[    2.946287] hub 1-0:1.0: USB hub found
[    2.946324] hub 1-0:1.0: 4 ports detected
[    2.948937] ehci-pci 0000:00:13.2: EHCI Host Controller
[    2.948959] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[    2.948980] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    2.949002] ehci-pci 0000:00:13.2: debug port 1
[    2.949087] ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb6b000
[    2.957443] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    2.957753] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    2.957763] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.957771] usb usb2: Product: EHCI Host Controller
[    2.957779] usb usb2: Manufacturer: Linux 3.13.0-24-generic ehci_hcd
[    2.957786] usb usb2: SerialNumber: 0000:00:13.2
[    2.958362] hub 2-0:1.0: USB hub found
[    2.958398] hub 2-0:1.0: 4 ports detected
[    2.960759] ehci-platform: EHCI generic platform driver
[    2.960803] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.960810] ohci-pci: OHCI PCI platform driver
[    2.961096] ohci-pci 0000:00:12.0: OHCI PCI host controller
[    2.961124] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
[    2.961201] ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb6e000

[dicadavid]

[    3.003590] ACPI: Battery Slot [BAT0] (battery present)
[    3.017618] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    3.017634] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.017642] usb usb3: Product: OHCI PCI host controller
[    3.017650] usb usb3: Manufacturer: Linux 3.13.0-24-generic ohci_hcd
[    3.017657] usb usb3: SerialNumber: 0000:00:12.0
[    3.018235] hub 3-0:1.0: USB hub found
[    3.018272] hub 3-0:1.0: 4 ports detected
[    3.020851] ohci-pci 0000:00:13.0: OHCI PCI host controller
[    3.020873] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 4
[    3.020921] ohci-pci 0000:00:13.0: irq 18, io mem 0xfeb6c000
[    3.077618] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    3.077634] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.077642] usb usb4: Product: OHCI PCI host controller
[    3.077650] usb usb4: Manufacturer: Linux 3.13.0-24-generic ohci_hcd
[    3.077657] usb usb4: SerialNumber: 0000:00:13.0
[    3.078247] hub 4-0:1.0: USB hub found
[    3.078286] hub 4-0:1.0: 4 ports detected
[    3.080630] ohci-platform: OHCI generic platform driver
[    3.080674] uhci_hcd: USB Universal Host Controller Interface driver
[    3.081015] xhci_hcd 0000:00:10.0: xHCI Host Controller
[    3.081037] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 5
[    3.081411] xhci_hcd 0000:00:10.0: irq 74 for MSI/MSI-X
[    3.081437] xhci_hcd 0000:00:10.0: irq 75 for MSI/MSI-X
[    3.081461] xhci_hcd 0000:00:10.0: irq 76 for MSI/MSI-X
[    3.081490] xhci_hcd 0000:00:10.0: irq 77 for MSI/MSI-X
[    3.081520] xhci_hcd 0000:00:10.0: irq 78 for MSI/MSI-X
[    3.081863] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[    3.081872] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.081880] usb usb5: Product: xHCI Host Controller
[    3.081887] usb usb5: Manufacturer: Linux 3.13.0-24-generic xhci_hcd
[    3.081894] usb usb5: SerialNumber: 0000:00:10.0
[    3.082346] hub 5-0:1.0: USB hub found
[    3.082386] hub 5-0:1.0: 2 ports detected
[    3.082695] xhci_hcd 0000:00:10.0: xHCI Host Controller
[    3.082709] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 6
[    3.084797] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
[    3.084806] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.084813] usb usb6: Product: xHCI Host Controller
[    3.084821] usb usb6: Manufacturer: Linux 3.13.0-24-generic xhci_hcd
[    3.084828] usb usb6: SerialNumber: 0000:00:10.0
[    3.085325] hub 6-0:1.0: USB hub found
[    3.085364] hub 6-0:1.0: 2 ports detected
[    3.093870] i8042: PNP: PS/2 Controller [PNP030b:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    3.095566] i8042: Detected active multiplexing controller, rev 1.1
[    3.096637] serio: i8042 KBD port at 0x60,0x64 irq 1
[    3.096661] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    3.096759] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    3.096840] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    3.096913] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    3.097500] mousedev: PS/2 mouse device common for all mice
[    3.098178] rtc_cmos 00:04: RTC can wake from S4
[    3.098430] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    3.098477] rtc_cmos 00:04: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    3.098720] device-mapper: uevent: version 1.0.3
[    3.098943] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    3.098970] ledtrig-cpu: registered to indicate activity on CPUs
[    3.099333] TCP: cubic registered
[    3.099645] NET: Registered protocol family 10
[    3.100242] NET: Registered protocol family 17
[    3.100274] Key type dns_resolver registered
[    3.101236] Loading compiled-in X.509 certificates
[    3.105499] Loaded X.509 cert 'Magrathea: Glacier signing key: 69b0d0a79b85d90621706e8d06604d730b359fc0'
[    3.105544] registered taskstats version 1
[    3.115426] Key type trusted registered
[    3.123924] Key type encrypted registered
[    3.132139] AppArmor: AppArmor sha1 policy hashing enabled
[    3.132151] IMA: No TPM chip found, activating TPM-bypass!
[    3.133069] regulator-dummy: disabling
[    3.133304]   Magic number: 6:749:87
[    3.133477] button LNXPWRBN:00: hash matches
[    3.133645] rtc_cmos 00:04: setting system clock to 2014-07-19 17:04:43 UTC (1405789483)
[    3.134072] acpi-cpufreq: overriding BIOS provided _PSD data
[    3.134669] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    3.134676] EDD information not available.
[    3.134830] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    3.134867] PM: Hibernation image not present or could not be loaded.
[    3.139872] Freeing unused kernel memory: 1332K (ffffffff81d1e000 - ffffffff81e6b000)
[    3.139883] Write protecting the kernel read-only data: 12288k
[    3.149792] Freeing unused kernel memory: 844K (ffff88000172d000 - ffff880001800000)
[    3.157657] Freeing unused kernel memory: 708K (ffff880001b4f000 - ffff880001c00000)
[    3.211398] systemd-udevd[118]: starting version 204
[    3.266512] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[    3.266729] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[    3.269380] usb 2-2: new high-speed USB device number 2 using ehci-pci
[    3.280264] ACPI Error: [^^^PB2_.VGA_.AFN7] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359)
[    3.280294] ACPI Error: Method parse/execution failed [\_SB_.PCI0.VGA_.LCDD._BCM] (Node ffff880139075988), AE_NOT_FOUND (20131115/psparse-536)
[    3.280323] ACPI Error: Evaluating _BCM failed (20131115/video-383)
[    3.280631] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input9
[    3.301860] wmi: Mapper loaded
[    3.312745] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    3.312795] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[    3.316815] sdhci: Secure Digital Host Controller Interface driver
[    3.316824] sdhci: Copyright(c) Pierre Ossman
[    3.316837] ahci 0000:00:11.0: version 3.0
[    3.317191] ahci 0000:00:11.0: irq 79 for MSI/MSI-X
[    3.317341] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    3.317354] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[    3.323463] r8169 0000:02:00.0: irq 80 for MSI/MSI-X
[    3.324005] r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xffffc90000656000, e0:3f:49:ef:f6:5e, XID 10900800 IRQ 80
[    3.324016] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    3.384376] scsi0 : ahci
[    3.389467] scsi1 : ahci
[    3.389715] ata1: SATA max UDMA/133 abar m1024@0xfeb6f000 port 0xfeb6f100 irq 79
[    3.389726] ata2: SATA max UDMA/133 abar m1024@0xfeb6f000 port 0xfeb6f180 irq 79
[    3.389906] sdhci-pci 0000:00:14.7: SDHCI controller found [1022:7813] (rev 1)
[    3.390363] sdhci-pci 0000:00:14.7: dummy supplies not allowed
[    3.390372] mmc0: no vqmmc regulator found
[    3.390381] sdhci-pci 0000:00:14.7: dummy supplies not allowed
[    3.390387] mmc0: no vmmc regulator found
[    3.390642] mmc0: SDHCI controller on PCI [0000:00:14.7] using ADMA
[    3.434745] usb 2-2: New USB device found, idVendor=04f2, idProduct=b40a
[    3.434761] usb 2-2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    3.434770] usb 2-2: Product: USB2.0 HD UVC WebCam
[    3.434778] usb 2-2: Manufacturer: Chicony Electronics Co.,Ltd.
[    3.434786] usb 2-2: SerialNumber: 0x0001
[    3.445324] tsc: Refined TSC clocksource calibration: 1497.191 MHz
[    3.756995] psmouse serio4: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
[    3.881582] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    3.881637] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    3.882646] ata1.00: ATA-8: HGST HTS545032A7E680, GGBOAF10, max UDMA/133
[    3.882656] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), a
[    3.883717] ata1.00: configured for UDMA/133
[    3.884328] scsi 0:0:0:0: Direct-Access     ATA      HGST HTS545032A7 GGBO PQ: 0 ANSI: 5
[    3.884852] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    3.884862] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    3.884962] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    3.885236] sd 0:0:0:0: [sda] Write Protect is off
[    3.885249] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.885429] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.886320] ata2.00: ATAPI: HL-DT-ST DVDRAM GU71N, AS00, max UDMA/133
[    3.887764] ata2.00: configured for UDMA/133
[    3.896607] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GU71N     AS00 PQ: 0 ANSI: 5
[    3.906998] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    3.907014] cdrom: Uniform CD-ROM driver Revision: 3.20
[    3.907564] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    3.907835] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    3.960322]  sda: sda1 sda2 sda3 < sda5 sda6 sda7 >
[    3.962105] sd 0:0:0:0: [sda] Attached SCSI disk

[dicadavid]

[    4.256347] psmouse serio4: elantech: assuming hardware version 4 (with firmware version 0x361f03)
[    4.269217] psmouse serio4: elantech: Synaptics capabilities query result 0x10, 0x14, 0x0e.
[    4.332277] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input13
[    4.445884] Switched to clocksource tsc
[    6.458538] platform microcode: Direct firmware load failed with error -2
[    6.458543] platform microcode: Falling back to user helper
[    6.625307] random: nonblocking pool is initialized
[    6.788995] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[   20.902384] Adding 3607548k swap on /dev/sda7.  Priority:-1 extents:1 across:3607548k FS
[   20.973568] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   21.138464] systemd-udevd[376]: starting version 204
[   21.139449] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
[   21.315338] lp: driver loaded but no devices found
[   21.367855] ppdev: user-space parallel port driver
[   21.521660] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[   21.521674] AMD IOMMUv2 functionality not available on this system
[   21.542772] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[   21.542790] Disabling lock debugging due to kernel taint
[   21.579155] fglrx: module verification failed: signature and/or  required key missing - tainting kernel
[   21.636423] MCE: In-kernel MCE decoding enabled.
[   21.639537] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \SBSM 1 (20131115/utaddress-251)
[   21.639565] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   21.684050] EDAC MC: Ver: 3.0.0
[   21.693922] AMD64 EDAC driver v3.4.0
[   21.694032] EDAC amd64: DRAM ECC disabled.
[   21.694055] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[   21.694055]  Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[   21.694055]  (Note that use of the override may cause unknown side effects.)
[   21.736442] <6>[fglrx] Maximum main memory to use for locked dma buffers: 3175 MBytes.
[   21.736557] <6>[fglrx]   vendor: 1002 device: 9832 count: 1
[   21.740718] <6>[fglrx] ioport: bar 4, base 0xf000, size: 0x100
[   21.743082] <6>[fglrx] Kernel PAT support is enabled
[   21.743154] <6>[fglrx] module loaded - fglrx 13.35.5 [Mar 12 2014] with 1 minors
[   21.747763] cfg80211: Calling CRDA to update world regulatory domain
[   21.754286] ip_tables: (C) 2000-2006 Netfilter Core Team
[   21.792798] device-mapper: multipath: version 1.6.0 loaded
[   21.818668] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   21.899888] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   21.985495] Linux video capture interface: v2.00
[   22.057176] uvcvideo: Found UVC 1.00 device USB2.0 HD UVC WebCam (04f2:b40a)
[   22.058487] ath: EEPROM regdomain: 0x65
[   22.058494] ath: EEPROM indicates we should expect a direct regpair map
[   22.058504] ath: Country alpha2 being used: 00
[   22.058509] ath: Regpair used: 0x65
[   22.068819] input: USB2.0 HD UVC WebCam as /devices/pci0000:00/0000:00:13.2/usb2/2-2/2-2:1.0/input/input14
[   22.073384] usbcore: registered new interface driver uvcvideo
[   22.073398] USB Video Class driver (1.1.1)
[   22.091887] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   22.094570] ieee80211 phy0: Atheros AR9485 Rev:1 mem=0xffffc90011880000, irq=28
[   22.131140] hda-intel 0000:00:01.1: Using LPIB position fix
[   22.131253] snd_hda_intel 0000:00:01.1: irq 81 for MSI/MSI-X
[   22.131694] kvm: Nested Virtualization enabled
[   22.131707] kvm: Nested Paging enabled
[   22.134039] hda-intel 0000:00:01.1: Enable sync_write for stable communication
[   22.149960] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input15
[   22.154090] hda-intel 0000:00:14.2: Using LPIB position fix
[   22.167017] hda-intel 0000:00:14.2: Enable sync_write for stable communication
[   22.191769] SKU: Nid=0x1d sku_cfg=0x40459a05
[   22.191782] SKU: port_connectivity=0x1
[   22.191788] SKU: enable_pcbeep=0x0
[   22.191793] SKU: check_sum=0x00000005
[   22.191798] SKU: customization=0x0000009a
[   22.191803] SKU: external_amp=0x0
[   22.191807] SKU: platform_type=0x1
[   22.191811] SKU: swap=0x0
[   22.191815] SKU: override=0x1
[   22.192076] autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   22.192082]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   22.192089]    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[   22.192093]    mono: mono_out=0x0
[   22.192096]    inputs:
[   22.192103]      Internal Mic=0x1a
[   22.192108]      Mic=0x19
[   22.192114] realtek: No valid SSID, checking pincfg 0x40459a05 for NID 0x1d
[   22.192119] realtek: Enabling init ASM_ID=0x9a05 CODEC_ID=10ec0233
[   22.201009] input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input17
[   22.206946] input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input16
[   22.620851] asus_wmi: ASUS WMI generic driver loaded
[   22.631779] asus_wmi: Initialization: 0x1
[   22.631928] asus_wmi: BIOS WMI version: 0.0
[   22.632102] asus_wmi: SFUN value: 0x4a0077
[   22.650174] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input18
[   22.655086] cfg80211: World regulatory domain updated:
[   22.655101] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   22.655110] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   22.655117] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   22.655124] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   22.655131] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   22.655137] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   22.754208] asus_wmi: Backlight controlled by ACPI video driver
[   22.940782] Bluetooth: Core ver 2.17
[   22.941040] NET: Registered protocol family 31
[   22.941048] Bluetooth: HCI device and connection manager initialized
[   22.941079] Bluetooth: HCI socket layer initialized
[   22.941090] Bluetooth: L2CAP socket layer initialized
[   22.941109] Bluetooth: SCO socket layer initialized
[   22.962395] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   22.962415] Bluetooth: BNEP filters: protocol multicast
[   22.962461] Bluetooth: BNEP socket layer initialized
[   22.983923] Bluetooth: RFCOMM TTY layer initialized
[   22.983968] Bluetooth: RFCOMM socket layer initialized
[   22.983989] Bluetooth: RFCOMM ver 1.11

[dicadavid]

[   23.525831] init: failsafe main process (758) killed by TERM signal
[   23.886258] init: cups main process (802) killed by HUP signal
[   23.886319] init: cups main process ended, respawning
[   26.178044] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   26.181620] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   26.609268] r8169 0000:02:00.0 eth0: link down
[   26.609414] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   26.610979] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   26.906041] init: samba-ad-dc main process (933) terminated with status 1
[   27.170137] init: udev-fallback-graphics main process (963) terminated with status 1
[   27.528698] wlan0: authenticate with 00:1c:f0:85:a1:ac
[   27.546674] wlan0: send auth to 00:1c:f0:85:a1:ac (try 1/3)
[   27.548821] wlan0: authenticated
[   27.549278] ath9k 0000:01:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
[   27.549289] ath9k 0000:01:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[   27.549297] ath9k 0000:01:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[   27.551267] wlan0: associate with 00:1c:f0:85:a1:ac (try 1/3)
[   27.553884] wlan0: RX AssocResp from 00:1c:f0:85:a1:ac (capab=0x431 status=0 aid=1)
[   27.554475] wlan0: associated
[   27.554510] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   30.248540] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
[   30.837499] init: plymouth-upstart-bridge main process ended, respawning
[   30.865189] init: plymouth-upstart-bridge main process (1644) terminated with status 1
[   30.865253] init: plymouth-upstart-bridge main process ended, respawning
[   31.602388] init: plymouth-stop pre-start process (1733) terminated with status 1
[   32.362983] fglrx_pci 0000:00:01.0: irq 82 for MSI/MSI-X
[   32.366267] <6>[fglrx] Firegl kernel thread PID: 1742
[   32.366591] <6>[fglrx] Firegl kernel thread PID: 1743
[   32.366907] <6>[fglrx] Firegl kernel thread PID: 1744
[   32.367256] <6>[fglrx] IRQ 82 Enabled
[   32.383992] <6>[fglrx] Reserved FB block: Shared offset:0, size:1000000
[   32.384001] <6>[fglrx] Reserved FB block: Unshared offset:fc51000, size:3000
[   32.384009] <6>[fglrx] Reserved FB block: Unshared offset:fc54000, size:3ac000
[   32.384016] <6>[fglrx] Reserved FB block: Unshared offset:1ffc8000, size:38000
[   32.504090] <6>[fglrx] ATIF platform detected with notification ID: 0x81

[dicadavid]

com microfone funcionando:

[    0.416783] pci 0000:00:18.1: [1022:1531] type 00 class 0x060000
[    0.416894] pci 0000:00:18.2: [1022:1532] type 00 class 0x060000
[    0.417010] pci 0000:00:18.3: [1022:1533] type 00 class 0x060000
[    0.417131] pci 0000:00:18.4: [1022:1534] type 00 class 0x060000
[    0.417245] pci 0000:00:18.5: [1022:1535] type 00 class 0x060000
[    0.417467] pci 0000:01:00.0: [168c:0032] type 00 class 0x028000
[    0.417510] pci 0000:01:00.0: reg 0x10: [mem 0xfea00000-0xfea7ffff 64bit]
[    0.417585] pci 0000:01:00.0: reg 0x30: [mem 0xfea80000-0xfea8ffff pref]
[    0.417687] pci 0000:01:00.0: supports D1 D2
[    0.417691] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.424628] pci 0000:00:02.2: PCI bridge to [bus 01]
[    0.424647] pci 0000:00:02.2:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.424840] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[    0.424887] pci 0000:02:00.0: reg 0x10: [io  0xe000-0xe0ff]
[    0.424928] pci 0000:02:00.0: reg 0x18: [mem 0xfe904000-0xfe904fff 64bit]
[    0.424959] pci 0000:02:00.0: reg 0x20: [mem 0xfe900000-0xfe903fff 64bit]
[    0.425067] pci 0000:02:00.0: supports D1 D2
[    0.425071] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.425140] pci 0000:02:00.0: System wakeup disabled by ACPI
[    0.432648] pci 0000:00:02.3: PCI bridge to [bus 02]
[    0.432664] pci 0000:00:02.3:   bridge window [io  0xe000-0xefff]
[    0.432671] pci 0000:00:02.3:   bridge window [mem 0xfe900000-0xfe9fffff]
[    0.432708] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
[    0.439729] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 *11 14 15)
[    0.439868] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 *11 14 15)
[    0.440009] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 14 15)
[    0.440148] ACPI: PCI Interrupt Link [LNKD] (IRQs *4 7 10 11 14 15)
[    0.440265] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 *11 14 15)
[    0.440362] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 *10 11 14 15)
[    0.440457] ACPI: PCI Interrupt Link [LNKG] (IRQs *4 7 10 11 14 15)
[    0.440564] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0
[    0.441462] ACPI: Enabled 1 GPEs in block 00 to 1F
[    0.441475] ACPI: \_SB_.PCI0: notify handler is installed
[    0.441608] Found 1 acpi root devices
[    0.441762] ACPI : EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
[    0.442055] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[    0.442065] vgaarb: loaded
[    0.442068] vgaarb: bridge control possible 0000:00:01.0
[    0.442428] SCSI subsystem initialized
[    0.442594] libata version 3.00 loaded.
[    0.442648] ACPI: bus type USB registered
[    0.442686] usbcore: registered new interface driver usbfs
[    0.442707] usbcore: registered new interface driver hub
[    0.442760] usbcore: registered new device driver usb
[    0.443000] PCI: Using ACPI for IRQ routing
[    0.450603] PCI: pci_cache_line_size set to 64 bytes
[    0.450675] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[    0.450680] e820: reserve RAM buffer [mem 0x9d0f0000-0x9fffffff]
[    0.450685] e820: reserve RAM buffer [mem 0x9d363000-0x9fffffff]
[    0.450688] e820: reserve RAM buffer [mem 0x9e9b8000-0x9fffffff]
[    0.450692] e820: reserve RAM buffer [mem 0x9eb13000-0x9fffffff]
[    0.450695] e820: reserve RAM buffer [mem 0x9f081000-0x9fffffff]
[    0.450698] e820: reserve RAM buffer [mem 0x9f400000-0x9fffffff]
[    0.450701] e820: reserve RAM buffer [mem 0x13f000000-0x13fffffff]
[    0.450883] NetLabel: Initializing
[    0.450887] NetLabel:  domain hash size = 128
[    0.450889] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.450919] NetLabel:  unlabeled traffic allowed by default
[    0.451044] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.451051] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.453166] Switched to clocksource hpet
[    0.463112] AppArmor: AppArmor Filesystem Enabled
[    0.463172] pnp: PnP ACPI init
[    0.463200] ACPI: bus type PNP registered
[    0.463447] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[    0.463456] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.463614] system 00:01: [mem 0xa0000000-0xbfffffff] has been reserved
[    0.463621] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.463729] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.463755] pnp 00:03: [dma 4]
[    0.463790] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.463863] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.463910] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.464025] system 00:06: [io  0x04d0-0x04d1] has been reserved
[    0.464032] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.464086] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.464219] pnp 00:08: Plug and Play ACPI device, IDs ETD0108 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
[    0.464306] pnp 00:09: Plug and Play ACPI device, IDs ATK3001 PNP030b (active)
[    0.464790] system 00:0a: [io  0x04d0-0x04d1] has been reserved
[    0.464796] system 00:0a: [io  0x040b] has been reserved
[    0.464800] system 00:0a: [io  0x04d6] has been reserved
[    0.464805] system 00:0a: [io  0x0c00-0x0c01] has been reserved
[    0.464810] system 00:0a: [io  0x0c14] has been reserved
[    0.464815] system 00:0a: [io  0x0c50-0x0c51] has been reserved
[    0.464819] system 00:0a: [io  0x0c52] has been reserved
[    0.464824] system 00:0a: [io  0x0c6c] has been reserved
[    0.464828] system 00:0a: [io  0x0c6f] has been reserved
[    0.464833] system 00:0a: [io  0x0cd0-0x0cd1] has been reserved
[    0.464837] system 00:0a: [io  0x0cd2-0x0cd3] has been reserved
[    0.464842] system 00:0a: [io  0x0cd4-0x0cd5] has been reserved
[    0.464847] system 00:0a: [io  0x0cd6-0x0cd7] has been reserved
[    0.464851] system 00:0a: [io  0x0cd8-0x0cdf] has been reserved
[    0.464856] system 00:0a: [io  0x0800-0x089f] could not be reserved
[    0.464861] system 00:0a: [io  0x0900-0x090f] has been reserved
[    0.464866] system 00:0a: [io  0x0910-0x091f] has been reserved
[    0.464871] system 00:0a: [io  0xfe00-0xfefe] has been reserved
[    0.464877] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.464883] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.464888] system 00:0a: [mem 0xfed80000-0xfed8ffff] has been reserved
[    0.464893] system 00:0a: [mem 0xfed61000-0xfed70fff] has been reserved
[    0.464898] system 00:0a: [mem 0xfec10000-0xfec10fff] has been reserved
[    0.464903] system 00:0a: [mem 0xfed00000-0xfed00fff] has been reserved
[    0.464908] system 00:0a: [mem 0xff000000-0xffffffff] has been reserved
[    0.464914] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.474222] pnp 00:0b: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.474240] pnp: PnP ACPI: found 12 devices
[    0.474244] ACPI: bus type PNP unregistered
[    0.482872] pci 0000:00:02.2: PCI bridge to [bus 01]
[    0.482882] pci 0000:00:02.2:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.482893] pci 0000:00:02.3: PCI bridge to [bus 02]
[    0.482898] pci 0000:00:02.3:   bridge window [io  0xe000-0xefff]
[    0.482906] pci 0000:00:02.3:   bridge window [mem 0xfe900000-0xfe9fffff]
[    0.482917] pci_bus 0000:00: resource 4 [io  0x0000-0x03af]
[    0.482922] pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7]
[    0.482926] pci_bus 0000:00: resource 6 [io  0x03b0-0x03df]
[    0.482930] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff]
[    0.482934] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
[    0.482938] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
[    0.482943] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff]
[    0.482947] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
[    0.482952] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
[    0.482955] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff]
[    0.483013] NET: Registered protocol family 2
[    0.483306] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.483519] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.483680] TCP: Hash tables configured (established 32768 bind 32768)
[    0.483726] TCP: reno registered
[    0.483741] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.483781] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.483910] NET: Registered protocol family 1
[    0.483935] pci 0000:00:01.0: Boot video device
[    0.677547] PCI: CLS 64 bytes, default 64
[    0.677692] Trying to unpack rootfs image as initramfs...

[dicadavid]

[    1.548474] Freeing initrd memory: 26188K (ffff880034cca000 - ffff88003665d000)
[    1.548487] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.548492] software IO TLB [mem 0x990f0000-0x9d0f0000] (64MB) mapped at [ffff8800990f0000-ffff88009d0effff]
[    1.548889] perf: AMD NB counters detected
[    1.548900] perf: AMD L2I counters detected
[    1.548931] LVT offset 0 assigned for vector 0x400
[    1.548971] perf: AMD IBS detected (0x000000ff)
[    1.549067] microcode: CPU0: patch_level=0x0700010b
[    1.549080] microcode: CPU1: patch_level=0x0700010b
[    1.549093] microcode: CPU2: patch_level=0x0700010b
[    1.549105] microcode: CPU3: patch_level=0x0700010b
[    1.549224] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.549228] Scanning for low memory corruption every 60 seconds
[    1.549819] Initialise system trusted keyring
[    1.549909] audit: initializing netlink socket (disabled)
[    1.549933] type=2000 audit(1405789814.440:1): initialized
[    1.604575] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.607259] VFS: Disk quotas dquot_6.5.2
[    1.607346] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.608248] fuse init (API version 7.22)
[    1.608399] msgmni has been set to 6646
[    1.608502] Key type big_key registered
[    1.609380] Key type asymmetric registered
[    1.609386] Asymmetric key parser 'x509' registered
[    1.609458] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.609533] io scheduler noop registered
[    1.609537] io scheduler deadline registered (default)
[    1.609589] io scheduler cfq registered
[    1.609955] pcieport 0000:00:02.2: irq 72 for MSI/MSI-X
[    1.610170] pcieport 0000:00:02.3: irq 73 for MSI/MSI-X
[    1.610298] pcieport 0000:00:02.2: Signaling PME through PCIe PME interrupt
[    1.610303] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[    1.610310] pcie_pme 0000:00:02.2:pcie01: service driver pcie_pme loaded
[    1.610339] pcieport 0000:00:02.3: Signaling PME through PCIe PME interrupt
[    1.610343] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[    1.610349] pcie_pme 0000:00:02.3:pcie01: service driver pcie_pme loaded
[    1.610377] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.610406] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.610478] vesafb: mode is 1366x768x32, linelength=5632, pages=0
[    1.610481] vesafb: scrolling: redraw
[    1.610485] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[    1.611019] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90010780000, using 4224k, total 4224k
[    1.687976] Console: switching to colour frame buffer device 170x48
[    1.764590] fb0: VESA VGA frame buffer device
[    1.764633] ipmi message handler version 39.2
[    1.769731] ACPI: AC Adapter [AC0] (off-line)
[    1.769966] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    1.769974] ACPI: Power Button [PWRB]
[    1.770057] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[    1.793602] ACPI: Lid Switch [LID]
[    1.793729] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[    1.793738] ACPI: Sleep Button [SLPB]
[    1.793811] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    1.793817] ACPI: Power Button [PWRF]
[    1.793973] ACPI: acpi_idle registered with cpuidle
[    1.795726] thermal LNXTHERM:00: registered as thermal_zone0
[    1.795730] ACPI: Thermal Zone [THRM] (53 C)
[    1.795778] GHES: HEST is not enabled!
[    1.796015] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.799696] Linux agpgart interface v0.103
[    1.802834] brd: module loaded
[    1.804498] loop: module loaded
[    1.805433] libphy: Fixed MDIO Bus: probed
[    1.805652] tun: Universal TUN/TAP device driver, 1.6
[    1.805655] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.805810] PPP generic driver version 2.4.2
[    1.805954] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.805963] ehci-pci: EHCI PCI platform driver
[    1.806167] ehci-pci 0000:00:12.2: EHCI Host Controller
[    1.806180] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[    1.806190] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.806205] ehci-pci 0000:00:12.2: debug port 1
[    1.806311] ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb6d000
[    1.817440] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    1.817576] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.817581] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.817586] usb usb1: Product: EHCI Host Controller
[    1.817590] usb usb1: Manufacturer: Linux 3.13.0-24-generic ehci_hcd
[    1.817594] usb usb1: SerialNumber: 0000:00:12.2
[    1.817909] hub 1-0:1.0: USB hub found
[    1.817929] hub 1-0:1.0: 4 ports detected
[    1.819341] ehci-pci 0000:00:13.2: EHCI Host Controller
[    1.819353] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[    1.819360] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.819374] ehci-pci 0000:00:13.2: debug port 1
[    1.819425] ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb6b000
[    1.829443] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    1.829582] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.829588] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.829592] usb usb2: Product: EHCI Host Controller
[    1.829596] usb usb2: Manufacturer: Linux 3.13.0-24-generic ehci_hcd
[    1.829600] usb usb2: SerialNumber: 0000:00:13.2
[    1.829911] hub 2-0:1.0: USB hub found
[    1.829931] hub 2-0:1.0: 4 ports detected
[    1.831186] ehci-platform: EHCI generic platform driver
[    1.831211] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.831214] ohci-pci: OHCI PCI platform driver
[    1.831372] ohci-pci 0000:00:12.0: OHCI PCI host controller
[    1.831384] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
[    1.831429] ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb6e000
[    1.889509] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.889518] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.889523] usb usb3: Product: OHCI PCI host controller
[    1.889527] usb usb3: Manufacturer: Linux 3.13.0-24-generic ohci_hcd
[    1.889531] usb usb3: SerialNumber: 0000:00:12.0
[    1.889853] hub 3-0:1.0: USB hub found
[    1.889874] hub 3-0:1.0: 4 ports detected
[    1.891255] ohci-pci 0000:00:13.0: OHCI PCI host controller
[    1.891267] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 4
[    1.891294] ohci-pci 0000:00:13.0: irq 18, io mem 0xfeb6c000
[    1.930574] ACPI: Battery Slot [BAT0] (battery present)
[    1.949528] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.949537] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.949542] usb usb4: Product: OHCI PCI host controller
[    1.949546] usb usb4: Manufacturer: Linux 3.13.0-24-generic ohci_hcd
[    1.949550] usb usb4: SerialNumber: 0000:00:13.0
[    1.949874] hub 4-0:1.0: USB hub found
[    1.949895] hub 4-0:1.0: 4 ports detected
[    1.951163] ohci-platform: OHCI generic platform driver
[    1.951187] uhci_hcd: USB Universal Host Controller Interface driver
[    1.951379] xhci_hcd 0000:00:10.0: xHCI Host Controller
[    1.951391] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 5
[    1.951648] xhci_hcd 0000:00:10.0: irq 74 for MSI/MSI-X
[    1.951662] xhci_hcd 0000:00:10.0: irq 75 for MSI/MSI-X
[    1.951679] xhci_hcd 0000:00:10.0: irq 76 for MSI/MSI-X
[    1.951694] xhci_hcd 0000:00:10.0: irq 77 for MSI/MSI-X
[    1.951707] xhci_hcd 0000:00:10.0: irq 78 for MSI/MSI-X
[    1.951895] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[    1.951900] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.951904] usb usb5: Product: xHCI Host Controller
[    1.951907] usb usb5: Manufacturer: Linux 3.13.0-24-generic xhci_hcd
[    1.951911] usb usb5: SerialNumber: 0000:00:10.0
[    1.952113] hub 5-0:1.0: USB hub found
[    1.952142] hub 5-0:1.0: 2 ports detected
[    1.952303] xhci_hcd 0000:00:10.0: xHCI Host Controller
[    1.952311] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 6
[    1.955069] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
[    1.955073] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.955077] usb usb6: Product: xHCI Host Controller
[    1.955081] usb usb6: Manufacturer: Linux 3.13.0-24-generic xhci_hcd
[    1.955084] usb usb6: SerialNumber: 0000:00:10.0
[    1.955300] hub 6-0:1.0: USB hub found
[    1.955320] hub 6-0:1.0: 2 ports detected
[    1.961655] i8042: PNP: PS/2 Controller [PNP030b:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    1.963256] i8042: Detected active multiplexing controller, rev 1.1
[    1.964271] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.964284] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.964334] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.964377] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.964420] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.964703] mousedev: PS/2 mouse device common for all mice
[    1.965056] rtc_cmos 00:04: RTC can wake from S4
[    1.965204] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    1.965233] rtc_cmos 00:04: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    1.965399] device-mapper: uevent: version 1.0.3
[    1.965516] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    1.965531] ledtrig-cpu: registered to indicate activity on CPUs
[    1.965736] TCP: cubic registered
[    1.965906] NET: Registered protocol family 10
[    1.966237] NET: Registered protocol family 17
[    1.966260] Key type dns_resolver registered
[    1.966759] Loading compiled-in X.509 certificates
[    1.969003] Loaded X.509 cert 'Magrathea: Glacier signing key: 69b0d0a79b85d90621706e8d06604d730b359fc0'
[    1.969031] registered taskstats version 1
[    1.974290] Key type trusted registered
[    1.978759] Key type encrypted registered
[    1.983147] AppArmor: AppArmor sha1 policy hashing enabled
[    1.983154] IMA: No TPM chip found, activating TPM-bypass!
[    1.983678] regulator-dummy: disabling
[    1.983779]   Magic number: 6:852:188
[    1.983901] acpi device:1a: hash matches
[    1.983975] rtc_cmos 00:04: setting system clock to 2014-07-19 17:10:15 UTC (1405789815)
[    1.984188] acpi-cpufreq: overriding BIOS provided _PSD data
[    1.984503] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.984506] EDD information not available.
[    1.984595] PM: Hibernation image not present or could not be loaded.
[    1.987293] Freeing unused kernel memory: 1332K (ffffffff81d1e000 - ffffffff81e6b000)
[    1.987299] Write protecting the kernel read-only data: 12288k
[    1.992590] Freeing unused kernel memory: 844K (ffff88000172d000 - ffff880001800000)
[    1.996784] Freeing unused kernel memory: 708K (ffff880001b4f000 - ffff880001c00000)

[dicadavid]

[    2.001846] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    2.025078] systemd-udevd[117]: starting version 204
[    2.053658] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[    2.053775] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[    2.061577] ACPI Error: [^^^PB2_.VGA_.AFN7] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359)
[    2.061592] ACPI Error: Method parse/execution failed [\_SB_.PCI0.VGA_.LCDD._BCM] (Node ffff880139075988), AE_NOT_FOUND (20131115/psparse-536)
[    2.061607] ACPI Error: Evaluating _BCM failed (20131115/video-383)
[    2.061783] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input9
[    2.074851] wmi: Mapper loaded
[    2.083645] sdhci: Secure Digital Host Controller Interface driver
[    2.083652] sdhci: Copyright(c) Pierre Ossman
[    2.089991] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    2.090016] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[    2.090946] sdhci-pci 0000:00:14.7: SDHCI controller found [1022:7813] (rev 1)
[    2.091098] sdhci-pci 0000:00:14.7: dummy supplies not allowed
[    2.091103] mmc0: no vqmmc regulator found
[    2.091107] sdhci-pci 0000:00:14.7: dummy supplies not allowed
[    2.091110] mmc0: no vmmc regulator found
[    2.091261] mmc0: SDHCI controller on PCI [0000:00:14.7] using ADMA
[    2.097017] ahci 0000:00:11.0: version 3.0
[    2.097260] ahci 0000:00:11.0: irq 79 for MSI/MSI-X
[    2.097367] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    2.097375] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[    2.097732] r8169 0000:02:00.0: irq 80 for MSI/MSI-X
[    2.098037] r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xffffc90000656000, e0:3f:49:ef:f6:5e, XID 10900800 IRQ 80
[    2.098043] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    2.141394] usb 2-2: new high-speed USB device number 2 using ehci-pci
[    2.153649] scsi0 : ahci
[    2.153853] scsi1 : ahci
[    2.153943] ata1: SATA max UDMA/133 abar m1024@0xfeb6f000 port 0xfeb6f100 irq 79
[    2.153949] ata2: SATA max UDMA/133 abar m1024@0xfeb6f000 port 0xfeb6f180 irq 79
[    2.307313] usb 2-2: New USB device found, idVendor=04f2, idProduct=b40a
[    2.307322] usb 2-2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    2.307327] usb 2-2: Product: USB2.0 HD UVC WebCam
[    2.307331] usb 2-2: Manufacturer: Chicony Electronics Co.,Ltd.
[    2.307335] usb 2-2: SerialNumber: 0x0001
[    2.513456] psmouse serio4: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
[    2.545401] tsc: Refined TSC clocksource calibration: 1497.191 MHz
[    2.645542] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.645575] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    2.646499] ata1.00: ATA-8: HGST HTS545032A7E680, GGBOAF10, max UDMA/133
[    2.646504] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), a
[    2.647489] ata1.00: configured for UDMA/133
[    2.647817] scsi 0:0:0:0: Direct-Access     ATA      HGST HTS545032A7 GGBO PQ: 0 ANSI: 5
[    2.648111] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    2.648116] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    2.648162] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.648371] sd 0:0:0:0: [sda] Write Protect is off
[    2.648377] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.648463] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.648656] ata2.00: ATAPI: HL-DT-ST DVDRAM GU71N, AS00, max UDMA/133
[    2.650095] ata2.00: configured for UDMA/133
[    2.655179] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GU71N     AS00 PQ: 0 ANSI: 5
[    2.668412] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.668421] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.668729] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    2.668860] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    2.722125]  sda: sda1 sda2 sda3 < sda5 sda6 sda7 >
[    2.723260] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.005313] psmouse serio4: elantech: assuming hardware version 4 (with firmware version 0x361f03)
[    3.018045] psmouse serio4: elantech: Synaptics capabilities query result 0x10, 0x14, 0x0e.
[    3.080969] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input13
[    3.545788] Switched to clocksource tsc
[    4.808747] platform microcode: Direct firmware load failed with error -2
[    4.808750] platform microcode: Falling back to user helper
[    5.083325] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[    5.170812] random: nonblocking pool is initialized
[   18.194401] Adding 3607548k swap on /dev/sda7.  Priority:-1 extents:1 across:3607548k FS
[   18.259849] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   18.386089] systemd-udevd[376]: starting version 204
[   18.509386] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
[   18.569601] lp: driver loaded but no devices found
[   18.584929] ppdev: user-space parallel port driver
[   18.680484] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[   18.680492] AMD IOMMUv2 functionality not available on this system
[   18.691247] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[   18.691256] Disabling lock debugging due to kernel taint
[   18.702383] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \SBSM 1 (20131115/utaddress-251)
[   18.702398] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   18.729330] MCE: In-kernel MCE decoding enabled.
[   18.738933] EDAC MC: Ver: 3.0.0
[   18.750773] AMD64 EDAC driver v3.4.0
[   18.750839] EDAC amd64: DRAM ECC disabled.
[   18.750852] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[   18.750852]  Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[   18.750852]  (Note that use of the override may cause unknown side effects.)
[   18.755378] cfg80211: Calling CRDA to update world regulatory domain
[   18.791783] fglrx: module verification failed: signature and/or  required key missing - tainting kernel
[   18.831872] <6>[fglrx] Maximum main memory to use for locked dma buffers: 3175 MBytes.
[   18.831929] <6>[fglrx]   vendor: 1002 device: 9832 count: 1
[   18.833564] <6>[fglrx] ioport: bar 4, base 0xf000, size: 0x100
[   18.834347] <6>[fglrx] Kernel PAT support is enabled
[   18.834386] <6>[fglrx] module loaded - fglrx 13.35.5 [Mar 12 2014] with 1 minors
[   18.872739] ip_tables: (C) 2000-2006 Netfilter Core Team
[   18.894899] kvm: Nested Virtualization enabled
[   18.894909] kvm: Nested Paging enabled
[   18.903186] device-mapper: multipath: version 1.6.0 loaded
[   18.911688] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   18.945968] ath: EEPROM regdomain: 0x65
[   18.945975] ath: EEPROM indicates we should expect a direct regpair map
[   18.945980] ath: Country alpha2 being used: 00
[   18.945983] ath: Regpair used: 0x65
[   18.955863] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   18.967312] Linux video capture interface: v2.00
[   18.973452] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   18.974138] ieee80211 phy0: Atheros AR9485 Rev:1 mem=0xffffc90010e00000, irq=28
[   18.993691] uvcvideo: Found UVC 1.00 device USB2.0 HD UVC WebCam (04f2:b40a)

[dicadavid]

[   19.023694] input: USB2.0 HD UVC WebCam as /devices/pci0000:00/0000:00:13.2/usb2/2-2/2-2:1.0/input/input14
[   19.023852] usbcore: registered new interface driver uvcvideo
[   19.023856] USB Video Class driver (1.1.1)
[   19.032813] hda-intel 0000:00:01.1: Using LPIB position fix
[   19.032873] snd_hda_intel 0000:00:01.1: irq 81 for MSI/MSI-X
[   19.036610] hda-intel 0000:00:01.1: Enable sync_write for stable communication
[   19.046018] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input15
[   19.047101] hda-intel 0000:00:14.2: Using LPIB position fix
[   19.054264] hda-intel 0000:00:14.2: Enable sync_write for stable communication
[   19.067005] SKU: Nid=0x1d sku_cfg=0x40459a05
[   19.067012] SKU: port_connectivity=0x1
[   19.067015] SKU: enable_pcbeep=0x0
[   19.067018] SKU: check_sum=0x00000005
[   19.067021] SKU: customization=0x0000009a
[   19.067023] SKU: external_amp=0x0
[   19.067026] SKU: platform_type=0x1
[   19.067028] SKU: swap=0x0
[   19.067030] SKU: override=0x1
[   19.068052] autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   19.068058]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   19.068061]    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[   19.068063]    mono: mono_out=0x0
[   19.068066]    inputs:
[   19.068069]      Internal Mic=0x1a
[   19.068072]      Mic=0x19
[   19.068075] realtek: No valid SSID, checking pincfg 0x40459a05 for NID 0x1d
[   19.068079] realtek: Enabling init ASM_ID=0x9a05 CODEC_ID=10ec0233
[   19.081124] input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input17
[   19.083185] input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input16
[   19.232296] asus_wmi: ASUS WMI generic driver loaded
[   19.235921] asus_wmi: Initialization: 0x1
[   19.236000] asus_wmi: BIOS WMI version: 0.0
[   19.236272] asus_wmi: SFUN value: 0x4a0077
[   19.244796] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input18
[   19.339249] asus_wmi: Backlight controlled by ACPI video driver
[   19.399528] cfg80211: World regulatory domain updated:
[   19.399537] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   19.399542] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   19.399546] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   19.399550] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   19.399553] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   19.399557] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   19.561209] init: failsafe main process (750) killed by TERM signal
[   19.960418] Bluetooth: Core ver 2.17
[   19.960618] NET: Registered protocol family 31
[   19.960623] Bluetooth: HCI device and connection manager initialized
[   19.960638] Bluetooth: HCI socket layer initialized
[   19.960644] Bluetooth: L2CAP socket layer initialized
[   19.960656] Bluetooth: SCO socket layer initialized
[   19.968707] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   19.968715] Bluetooth: BNEP filters: protocol multicast
[   19.968732] Bluetooth: BNEP socket layer initialized
[   19.971348] Bluetooth: RFCOMM TTY layer initialized
[   19.971370] Bluetooth: RFCOMM socket layer initialized
[   19.971382] Bluetooth: RFCOMM ver 1.11
[   20.386466] init: cups main process (845) killed by HUP signal
[   20.386498] init: cups main process ended, respawning
[   21.942296] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   21.945593] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   22.136965] r8169 0000:02:00.0 eth0: link down
[   22.137053] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   22.137823] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   22.643111] init: samba-ad-dc main process (926) terminated with status 1
[   22.817847] init: udev-fallback-graphics main process (965) terminated with status 1
[   23.050341] wlan0: authenticate with 00:1c:f0:85:a1:ac
[   23.067571] wlan0: send auth to 00:1c:f0:85:a1:ac (try 1/3)
[   23.069614] wlan0: authenticated
[   23.069856] ath9k 0000:01:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
[   23.069862] ath9k 0000:01:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[   23.069866] ath9k 0000:01:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[   23.070940] wlan0: associate with 00:1c:f0:85:a1:ac (try 1/3)
[   23.073622] wlan0: RX AssocResp from 00:1c:f0:85:a1:ac (capab=0x431 status=0 aid=1)
[   23.073946] wlan0: associated
[   23.074012] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   25.727991] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
[   25.886896] init: plymouth-upstart-bridge main process ended, respawning
[   25.900155] init: plymouth-upstart-bridge main process (1634) terminated with status 1
[   25.900188] init: plymouth-upstart-bridge main process ended, respawning
[   26.652826] init: plymouth-stop pre-start process (1730) terminated with status 1
[   26.997148] fglrx_pci 0000:00:01.0: irq 82 for MSI/MSI-X
[   26.998877] <6>[fglrx] Firegl kernel thread PID: 1737
[   26.999059] <6>[fglrx] Firegl kernel thread PID: 1738
[   26.999229] <6>[fglrx] Firegl kernel thread PID: 1739
[   26.999433] <6>[fglrx] IRQ 82 Enabled
[   27.008870] <6>[fglrx] Reserved FB block: Shared offset:0, size:1000000
[   27.008876] <6>[fglrx] Reserved FB block: Unshared offset:fc51000, size:3000
[   27.008879] <6>[fglrx] Reserved FB block: Unshared offset:fc54000, size:3ac000
[   27.008883] <6>[fglrx] Reserved FB block: Unshared offset:1ffc8000, size:38000
[   27.099524] <6>[fglrx] ATIF platform detected with notification ID: 0x81
[   75.557777] <3>[fglrx:IRQMGR_callback_hifreq_interrupt] *ERROR* irqSourceID = 0xff000121 is unknown