Autor Tópico: Ainda problemas 2 monitores - Solução e XORG FUNCIONANDO  (Lida 6584 vezes)

Offline mickeyknox

  • Usuário Ubuntu
  • *
  • Mensagens: 87
  • Restam menos de 3200 tigres livres no mundo!
    • Ver perfil
    • Guido Nietmann - Consultoria em Internet
Ainda problemas 2 monitores - Solução e XORG FUNCIONANDO
« Online: 14 de Maio de 2007, 14:12 »
Será que alguém me ajuda a descobrir onde tô fazendo derma? Não consigo habilitar meu segundo monitor (e sou viciado em usar 2).
Tentei configurar o Xorg corretamente mas ainda não consegui.

Pra começar, a configuração da máquina:
Pentium 4 HT 2.8
2gb RAM DDR500
20gb de hd dedicados ao Ubuntu
Motherboard Intel P865 Pearl
Placa de audio integrada
Placas de Vídeo:
Geforce AGP Nvidia MX4000 128mb (funcionando corretamente. Testei com os 2 drivers, e só funcionou bem com o mais recente).
Geforce PCI Nvidia MX4000 64mb (não está funcionando)
Placa de captura de vídeo: Pinnacle PCTV PRO (não testei ainda, mas isso não é tão importante)

Observação:  A placa Gforce ativa está funcionando muito bem, Beryl, Efeitos de Área de Trabalho funcionam bem (porém estão desabilitados), games como Enemy Territory rodando perfeitamente.

Segue abaixo meu arquivo Xorg.conf, e os resultados que obtive para os comandos LSPCI e LSPCI -vvv, será que alguma boa alma me ajuda a identificar o que tá errado?

Código: [Selecionar]
========================Xorg.conf====================================

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
Fontpath "/usr/share/fonts/X11/misc"
Fontpath "/usr/share/fonts/X11/cyrillic"
Fontpath "/usr/share/fonts/X11/100dpi/:unscaled"
Fontpath "/usr/share/fonts/X11/75dpi/:unscaled"
Fontpath "/usr/share/fonts/X11/Type1"
Fontpath "/usr/share/fonts/X11/100dpi"
Fontpath "/usr/share/fonts/X11/75dpi"
# path to defoma fonts
Fontpath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "vbe"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "abnt2"
Option "XkbLayout" "br"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection


Section "Device"
   Identifier   "nvidia0"
   Driver      "nvidia"
   Busid      "PCI:1:0:0"
   Option      "AddARGBVisuals"   "True"
   Option      "AddARGBGLXVisuals"   "True"
   Option      "NoLogo"   "True"
EndSection

Section "Device"
   Identifier   "nvidia1"
   Driver      "nvidia"
   Busid      "PCI:2:3.0"
   Option      "AddARGBVisuals"   "True"
   Option      "AddARGBGLXVisuals"   "True"
   Option      "NoLogo"   "True"
EndSection

Section "Monitor"
Identifier "Monitor0"
Option "DPMS"
Horizsync 30-83
Vertrefresh 56-75
EndSection

Section "Monitor"
Identifier "Monitor1"
Option "DPMS"
HorizSync 30-55
VertRefresh 50-120
EndSection

Section "Screen"
   Identifier   "Default Screen"
   Device      "nvidia0"
   Monitor      "Monitor0"
   Defaultdepth   24
   SubSection "Display"
      Depth   24
      Modes  "1024x768" "1280x960" "800x600" "640x480"
   EndSubSection
EndSection

Section "Screen"
   Identifier   "Second Screen"
   Device      "nvidia1"
   Monitor      "Monitor1"
   Defaultdepth   24
   SubSection "Display"
      Depth   24
      Modes  "1024x768" "800x600" "640x480"
   EndSubSection
EndSection

Section "ServerLayout"
   Identifier   "Default Layout"
  screen "Default Screen"
  screen "Second Screen" RightOf "Default Screen" 
   Inputdevice   "Generic Keyboard"
   Inputdevice   "Configured Mouse"
   Inputdevice   "stylus"   "SendCoreEvents"
   Inputdevice   "cursor"   "SendCoreEvents"
   Inputdevice   "eraser"   "SendCoreEvents"
EndSection

Section "DRI"
   Mode   0666
EndSection

========================LSPCI -VVV==================================

00:00.0 Host bridge: Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub Interface (rev 02)
        Subsystem: Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub Interface
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
        Latency: 0
        Region 0: Memory at f4000000 (32-bit, prefetchable) [size=64M]
        Capabilities: [e4] Vendor Specific Information
        Capabilities: [a0] AGP version 3.0
                Status: RQ=32 Iso- ArqSz=2 Cal=2 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3+ Rate=x4,x8
                Command: RQ=1 ArqSz=0 Cal=2 SBA+ AGP+ GART64- 64bit- FW- Rate=x8

00:01.0 PCI bridge: Intel Corporation 82865G/PE/P PCI to AGP Controller (rev 02) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 32
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
        I/O behind bridge: 0000f000-00000fff
        Memory behind bridge: fa900000-fc9fffff
        Prefetchable memory behind bridge: d2800000-e27fffff
        Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-

00:1d.0 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 (rev 02) (prog-if 00 [UHCI])
        Subsystem: Intel Corporation D865PERL mainboard
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin A routed to IRQ 18
        Region 4: I/O ports at cc00 [size=32]

00:1d.1 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 (rev 02) (prog-if 00 [UHCI])
        Subsystem: Intel Corporation D865PERL mainboard
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin B routed to IRQ 19
        Region 4: I/O ports at d000 [size=32]

00:1d.2 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 (rev 02) (prog-if 00 [UHCI])
        Subsystem: Intel Corporation D865PERL mainboard
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin C routed to IRQ 16
        Region 4: I/O ports at d400 [size=32]

00:1d.3 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4 (rev 02) (prog-if 00 [UHCI])
        Subsystem: Intel Corporation D865PERL mainboard
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin A routed to IRQ 18
        Region 4: I/O ports at d800 [size=32]

00:1d.7 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller (rev 02) (prog-if 20 [EHCI])
        Subsystem: Intel Corporation D865PERL mainboard
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin D routed to IRQ 17
        Region 0: Memory at febffc00 (32-bit, non-prefetchable) [size=1K]
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [58] Debug port

00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c2) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
        I/O behind bridge: 0000b000-0000bfff
        Memory behind bridge: fca00000-feafffff
        Prefetchable memory behind bridge: e2800000-f27fffff
        Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-

00:1f.0 ISA bridge: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge (rev 02)
        Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0

00:1f.1 IDE interface: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller (rev 02) (prog-if 8a [Master SecP PriP])
        Subsystem: Intel Corporation D865PERL mainboard
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin A routed to IRQ 16
        Region 0: I/O ports at 01f0 [size=8]
        Region 1: I/O ports at 03f4 [size=1]
        Region 2: I/O ports at 0170 [size=8]
        Region 3: I/O ports at 0374 [size=1]
        Region 4: I/O ports at ffa0 [size=16]
        Region 5: Memory at 88000000 (32-bit, non-prefetchable) [size=1K]

00:1f.2 IDE interface: Intel Corporation 82801EB (ICH5) SATA Controller (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
        Subsystem: Intel Corporation D865PERL mainboard
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin A routed to IRQ 16
        Region 0: I/O ports at ec00 [size=8]
        Region 1: I/O ports at e800 [size=4]
        Region 2: I/O ports at e400 [size=8]
        Region 3: I/O ports at e000 [size=4]
        Region 4: I/O ports at dc00 [size=16]

00:1f.3 SMBus: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller (rev 02)
        Subsystem: Intel Corporation D865PERL mainboard
        Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Interrupt: pin B routed to IRQ 3
        Region 4: I/O ports at c800 [size=32]

00:1f.5 Multimedia audio controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller (rev 02)
        Subsystem: Intel Corporation D865PERL mainboard
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin B routed to IRQ 21
        Region 2: Memory at febff800 (32-bit, non-prefetchable) [size=512]
        Region 3: Memory at febff400 (32-bit, non-prefetchable) [size=256]
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

01:00.0 VGA compatible controller: nVidia Corporation NV18 [GeForce4 MX 4000 AGP 8x] (rev a4) (prog-if 00 [VGA])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 248 (1250ns min, 250ns max)
        Interrupt: pin A routed to IRQ 18
        Region 0: Memory at fb000000 (32-bit, non-prefetchable) [size=16M]
        Region 1: Memory at d8000000 (32-bit, prefetchable) [size=128M]
        [virtual] Expansion ROM at fc9e0000 [disabled] [size=128K]
        Capabilities: [60] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [44] AGP version 3.0
                Status: RQ=32 Iso- ArqSz=0 Cal=3 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3+ Rate=x4,x8
                Command: RQ=32 ArqSz=2 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x8

02:00.0 Communication controller: Agere Systems LT WinModem
        Subsystem: Agere Systems Unknown device 0440
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 32 (63000ns min, 3500ns max)
        Interrupt: pin A routed to IRQ 9
        Region 0: Memory at feaffc00 (32-bit, non-prefetchable) [size=256]
        Region 1: I/O ports at bc00 [size=8]
        Region 2: I/O ports at b800 [size=256]
        Capabilities: [f8] Power Management version 2
                Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2+,D3hot+,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

02:01.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
        Subsystem: Realtek Semiconductor Co., Ltd. RT8139
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 32 (8000ns min, 16000ns max)
        Interrupt: pin A routed to IRQ 20
        Region 0: I/O ports at b400 [size=256]
        Region 1: Memory at feaff800 (32-bit, non-prefetchable) [size=256]
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

02:02.0 Multimedia controller: Philips Semiconductors SAA7133/SAA7135 Video Broadcast Decoder (rev d0)
        Subsystem: Pinnacle Systems Inc. PCTV 110i (saa7133)
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 32 (21000ns min, 8000ns max)
        Interrupt: pin A routed to IRQ 21
        Region 0: Memory at feaff000 (32-bit, non-prefetchable) [size=2K]
        Capabilities: [40] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=1 PME-

02:03.0 VGA compatible controller: nVidia Corporation NV18 [GeForce4 MX 4000 AGP 8x] (rev c1) (prog-if 00 [VGA])
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 248 (1250ns min, 250ns max)
        Interrupt: pin A routed to IRQ 19
        Region 0: Memory at ff000000 (32-bit, non-prefetchable) [size=16M]
        Region 1: Memory at e8000000 (32-bit, prefetchable) [size=128M]
        [virtual] Expansion ROM at e2800000 [disabled] [size=128K]
        Capabilities: [60] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

==================================LSPCI ===================================

00:00.0 Host bridge: Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub Interface (rev 02)
00:01.0 PCI bridge: Intel Corporation 82865G/PE/P PCI to AGP Controller (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c2)
00:1f.0 ISA bridge: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801EB (ICH5) SATA Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller (rev 02)
00:1f.5 Multimedia audio controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller (rev 02)
01:00.0 VGA compatible controller: nVidia Corporation NV18 [GeForce4 MX 4000 AGP 8x] (rev a4)
02:00.0 Communication controller: Agere Systems LT WinModem
02:01.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
02:02.0 Multimedia controller: Philips Semiconductors SAA7133/SAA7135 Video Broadcast Decoder (rev d0)
02:03.0 VGA compatible controller: nVidia Corporation NV18 [GeForce4 MX 4000 AGP 8x] (rev c1)

==========================================================

Já tentei de tudo mas minha inexperiencia não me permitiu achar o erro, alguém pode me ajudar? Valeu!

[code]
[/code]
« Última modificação: 15 de Maio de 2007, 14:46 por mickeyknox »
Pentium IV 3.2 Prescott 2gb ram DDR 400 ATI 9200 256mb Seagate 160gb Maxtor 80gb + 22" LG Windão Pentium IV 2.8ht 2gb ram DDR400 Geforce 6200LE 256MB Seagate 250gb SATA Maxtor 160gb SATA 17" LG e mais uma ou outra..

Offline mickeyknox

  • Usuário Ubuntu
  • *
  • Mensagens: 87
  • Restam menos de 3200 tigres livres no mundo!
    • Ver perfil
    • Guido Nietmann - Consultoria em Internet
Re: Ainda problemas para uso de 2 monitores - onde será que estou errando?
« Resposta #1 Online: 14 de Maio de 2007, 14:46 »
Desculpem pelo bug da fonte do texto anterior, tentei arrumar editando mas não deu.

Descobri o tal comando X -configure :2 num guia do clube do hardware, segue o xorg.conf.new que ele gerou...
(To com medo de juntar com o meu e fazer derma de novo)

Código: [Selecionar]
Section "ServerLayout"
Identifier     "X.org Configured"
Screen      0  "Screen0" 0 0
Screen      1  "Screen1" RightOf "Screen0"
InputDevice    "Mouse0" "CorePointer"
InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
RgbPath      "/etc/X11/rgb"
ModulePath   "/usr/lib/xorg/modules"
FontPath     "/usr/share/fonts/X11/misc"
FontPath     "/usr/X11R6/lib/X11/fonts/misc"
FontPath     "/usr/share/fonts/X11/cyrillic"
FontPath     "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath     "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath     "/usr/share/fonts/X11/Type1"
FontPath     "/usr/X11R6/lib/X11/fonts/Type1"
FontPath     "/usr/share/fonts/X11/100dpi"
FontPath     "/usr/share/fonts/X11/75dpi"
FontPath     "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
Load  "extmod"
Load  "dbe"
Load  "xtrap"
Load  "glx"
Load  "GLcore"
Load  "record"
Load  "dri"
Load  "type1"
EndSection

Section "InputDevice"
Identifier  "Keyboard0"
Driver      "kbd"
EndSection

Section "InputDevice"
Identifier  "Mouse0"
Driver      "mouse"
Option     "Protocol" "auto"
Option     "Device" "/dev/input/mice"
Option     "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
#DisplaySize   340   270 # mm
Identifier   "Monitor0"
VendorName   "GSM"
ModelName    ""
 ### Comment all HorizSync and VertRefresh values to use DDC:
HorizSync    30.0 - 83.0
VertRefresh  56.0 - 75.0
Option     "DPMS"
EndSection

Section "Monitor"
Identifier   "Monitor1"
VendorName   "Monitor Vendor"
ModelName    "Monitor Model"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "SWcursor"            # [<bool>]
        #Option     "HWcursor"            # [<bool>]
        #Option     "NoAccel"            # [<bool>]
        #Option     "ShadowFB"            # [<bool>]
        #Option     "UseFBDev"            # [<bool>]
        #Option     "Rotate"              # [<str>]
        #Option     "VideoKey"            # <i>
        #Option     "FlatPanel"          # [<bool>]
        #Option     "FPDither"            # [<bool>]
        #Option     "CrtcNumber"          # <i>
        #Option     "FPScale"            # [<bool>]
        #Option     "FPTweak"            # <i>
Identifier  "Card0"
Driver      "nv"
VendorName  "nVidia Corporation"
BoardName   "NV18 [GeForce4 MX 4000 AGP 8x]"
BusID       "PCI:1:0:0"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "SWcursor"            # [<bool>]
        #Option     "HWcursor"            # [<bool>]
        #Option     "NoAccel"            # [<bool>]
        #Option     "ShadowFB"            # [<bool>]
        #Option     "UseFBDev"            # [<bool>]
        #Option     "Rotate"              # [<str>]
        #Option     "VideoKey"            # <i>
        #Option     "FlatPanel"          # [<bool>]
        #Option     "FPDither"            # [<bool>]
        #Option     "CrtcNumber"          # <i>
        #Option     "FPScale"            # [<bool>]
        #Option     "FPTweak"            # <i>
Identifier  "Card1"
Driver      "nv"
VendorName  "nVidia Corporation"
BoardName   "NV18 [GeForce4 MX 4000 AGP 8x]"
BusID       "PCI:2:3:0"
EndSection

Section "Screen"
Identifier "Screen0"
Device     "Card0"
Monitor    "Monitor0"
SubSection "Display"
Viewport   0 0
Depth     1
EndSubSection
SubSection "Display"
Viewport   0 0
Depth     4
EndSubSection
SubSection "Display"
Viewport   0 0
Depth     8
EndSubSection
SubSection "Display"
Viewport   0 0
Depth     15
EndSubSection
SubSection "Display"
Viewport   0 0
Depth     16
EndSubSection
SubSection "Display"
Viewport   0 0
Depth     24
EndSubSection
EndSection

Section "Screen"
Identifier "Screen1"
Device     "Card1"
Monitor    "Monitor1"
SubSection "Display"
Viewport   0 0
Depth     1
EndSubSection
SubSection "Display"
Viewport   0 0
Depth     4
EndSubSection
SubSection "Display"
Viewport   0 0
Depth     8
EndSubSection
SubSection "Display"
Viewport   0 0
Depth     15
EndSubSection
SubSection "Display"
Viewport   0 0
Depth     16
EndSubSection
SubSection "Display"
Viewport   0 0
Depth     24
EndSubSection
EndSection
« Última modificação: 14 de Maio de 2007, 23:06 por n3t0 »
Pentium IV 3.2 Prescott 2gb ram DDR 400 ATI 9200 256mb Seagate 160gb Maxtor 80gb + 22" LG Windão Pentium IV 2.8ht 2gb ram DDR400 Geforce 6200LE 256MB Seagate 250gb SATA Maxtor 160gb SATA 17" LG e mais uma ou outra..

Offline mickeyknox

  • Usuário Ubuntu
  • *
  • Mensagens: 87
  • Restam menos de 3200 tigres livres no mundo!
    • Ver perfil
    • Guido Nietmann - Consultoria em Internet
ACHEEEEEEEEI! VIVAAA
« Resposta #2 Online: 14 de Maio de 2007, 21:17 »
Consegui fazer os dois monitores funcionarem, segue meu xorg, para o caso de alguém ter uma configuração semelhante! Resta uma dúvida...fiquei com duas áreas de trabalho, mas não consigo transferir qualquer janela de um monitor para o outro. Isso é assim mesmo? No Win, simplesmente arrasto...
Abração e obrigado a todos!

Código: [Selecionar]
Section "Files"
   Fontpath   "/usr/share/fonts/X11/misc"
   Fontpath   "/usr/share/fonts/X11/cyrillic"
   Fontpath   "/usr/share/fonts/X11/100dpi/:unscaled"
   Fontpath   "/usr/share/fonts/X11/75dpi/:unscaled"
   Fontpath   "/usr/share/fonts/X11/Type1"
   Fontpath   "/usr/share/fonts/X11/100dpi"
   Fontpath   "/usr/share/fonts/X11/75dpi"
   # path to defoma fonts
   Fontpath   "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
   Load      "i2c"
   Load      "bitmap"
   Load      "ddc"
   Load      "extmod"
   Load      "freetype"
   Load      "glx"
   Load      "int10"
   Load      "vbe"
EndSection

Section "InputDevice"
   Identifier   "Generic Keyboard"
   Driver      "kbd"
   Option      "CoreKeyboard"
   Option      "XkbRules"   "xorg"
   Option      "XkbModel"   "abnt2"
   Option      "XkbLayout"   "br"
EndSection

Section "InputDevice"
   Identifier   "Configured Mouse"
   Driver      "mouse"
   Option      "CorePointer"
   Option      "Device"   "/dev/input/mice"
   Option      "Protocol"   "ImPS/2"
   Option      "ZAxisMapping"   "4 5"
   Option      "Emulate3Buttons"   "true"
EndSection

Section "InputDevice"
   Driver      "wacom"
   Identifier   "stylus"
   Option      "Device"   "/dev/input/wacom"
   Option      "Type"   "stylus"
   Option      "ForceDevice"   "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
   Driver      "wacom"
   Identifier   "eraser"
   Option      "Device"   "/dev/input/wacom"
   Option      "Type"   "eraser"
   Option      "ForceDevice"   "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
   Driver      "wacom"
   Identifier   "cursor"
   Option      "Device"   "/dev/input/wacom"
   Option      "Type"   "cursor"
   Option      "ForceDevice"   "ISDV4"# Tablet PC ONLY
EndSection


Section "Device"
   Identifier   "card0"
   Driver      "nvidia"
   VendorName  "nVidia Corporation"
   BoardName   "NV18 [GeForce4 MX 4000 AGP 8x]"
   BusID       "PCI:1:0:0"
   Option      "AddARGBVisuals"   "True"
   Option      "AddARGBGLXVisuals"   "True"
   Option      "NoLogo"   "True"
EndSection

Section "Device"
   Identifier  "Card1"
   Driver      "nvidia"
   VendorName  "nVidia Corporation"
   BoardName   "NV18 [GeForce4 MX 4000 AGP 8x]"
   BusID       "PCI:2:3:0"
   Option      "AddARGBVisuals"   "True"
   Option      "AddARGBGLXVisuals"   "True"
   Option      "NoLogo"   "True"
EndSection

Section "Monitor"
   Identifier   "Monitor0"
   Option      "DPMS"
   Horizsync   30-83
   Vertrefresh   56-75
EndSection

Section "Monitor"
   Identifier    "Monitor1"
   Option       "DPMS"
   HorizSync    30-55
   VertRefresh    50-120
EndSection

Section "Screen"
   Identifier "Screen0"
   Device     "Card0"
   Monitor    "Monitor0"
   Defaultdepth   24
   SubSection "Display"
      Depth   24
      Modes  "1024x768" "1280x960" "800x600" "640x480"
   EndSubSection
EndSection

Section "Screen"
   Identifier "Screen1"
   Device     "Card1"
   Monitor    "Monitor1"
   Defaultdepth   24
   SubSection "Display"
      Depth   24
      Modes  "1024x768" "800x600" "640x480"
   EndSubSection
EndSection


Section "ServerLayout"
   Identifier   "Default Layout"
  screen "Screen0"
  screen "Screen1" RightOf "Screen0" 
   Inputdevice   "Generic Keyboard"
   Inputdevice   "Configured Mouse"
   Inputdevice   "stylus"   "SendCoreEvents"
   Inputdevice   "cursor"   "SendCoreEvents"
   Inputdevice   "eraser"   "SendCoreEvents"
EndSection

Section "DRI"
   Mode   0666
EndSection
« Última modificação: 14 de Maio de 2007, 23:06 por n3t0 »
Pentium IV 3.2 Prescott 2gb ram DDR 400 ATI 9200 256mb Seagate 160gb Maxtor 80gb + 22" LG Windão Pentium IV 2.8ht 2gb ram DDR400 Geforce 6200LE 256MB Seagate 250gb SATA Maxtor 160gb SATA 17" LG e mais uma ou outra..

Offline mickeyknox

  • Usuário Ubuntu
  • *
  • Mensagens: 87
  • Restam menos de 3200 tigres livres no mundo!
    • Ver perfil
    • Guido Nietmann - Consultoria em Internet
SOLUÇÃO - Ainda problemas para uso de 2 monitores
« Resposta #3 Online: 15 de Maio de 2007, 14:46 »
Resolvi a parte das áreas de trabalho, posto na esperança. O que faltava era a opção referente ao Xinerama.
Incluí também uma outra opção que ignora a restrição de resoluções do driver da Nvidia. Com isso, consegui finalmente meus 2 monitores totalmente integrados, com resoluções diferentes (sem essa opção só conseguia os 2 em 1024)
Espero que ajude alguém. Abração e obrigado.

Código: [Selecionar]
Section "Files"
   Fontpath   "/usr/share/fonts/X11/misc"
   Fontpath   "/usr/share/fonts/X11/cyrillic"
   Fontpath   "/usr/share/fonts/X11/100dpi/:unscaled"
   Fontpath   "/usr/share/fonts/X11/75dpi/:unscaled"
   Fontpath   "/usr/share/fonts/X11/Type1"
   Fontpath   "/usr/share/fonts/X11/100dpi"
   Fontpath   "/usr/share/fonts/X11/75dpi"
   # path to defoma fonts
   Fontpath   "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
   Load      "i2c"
   Load      "bitmap"
   Load      "ddc"
   Load      "extmod"
   Load      "freetype"
   Load      "glx"
   Load      "int10"
   Load      "vbe"
EndSection

Section "InputDevice"
   Identifier   "Generic Keyboard"
   Driver      "kbd"
   Option      "CoreKeyboard"
   Option      "XkbRules"   "xorg"
   Option      "XkbModel"   "abnt2"
   Option      "XkbLayout"   "br"
EndSection

Section "InputDevice"
   Identifier   "Configured Mouse"
   Driver      "mouse"
   Option      "CorePointer"
   Option      "Device"   "/dev/input/mice"
   Option      "Protocol"   "ImPS/2"
   Option      "ZAxisMapping"   "4 5"
   Option      "Emulate3Buttons"   "true"
EndSection

Section "InputDevice"
   Driver      "wacom"
   Identifier   "stylus"
   Option      "Device"   "/dev/input/wacom"
   Option      "Type"   "stylus"
   Option      "ForceDevice"   "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
   Driver      "wacom"
   Identifier   "eraser"
   Option      "Device"   "/dev/input/wacom"
   Option      "Type"   "eraser"
   Option      "ForceDevice"   "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
   Driver      "wacom"
   Identifier   "cursor"
   Option      "Device"   "/dev/input/wacom"
   Option      "Type"   "cursor"
   Option      "ForceDevice"   "ISDV4"# Tablet PC ONLY
EndSection

[color=red]Section "ServerFlags"
        Option "Xinerama" "true"
EndSection[/color]

Section "Device"
   Identifier   "card0"
   Driver      "nvidia"
   VendorName  "nVidia Corporation"
   BoardName   "NV18 [GeForce4 MX 4000 AGP 8x]"
   BusID       "PCI:1:0:0"
   Option      "AddARGBVisuals"   "True"
   Option      "AddARGBGLXVisuals"   "True"
   Option      "NoLogo"   "True"
[color=red]   Option      "IgnoreEDID"                "true"[/color]
EndSection

Section "Device"
   Identifier  "Card1"
   Driver      "nvidia"
   VendorName  "nVidia Corporation"
   BoardName   "NV18 [GeForce4 MX 4000 AGP 8x]"
   BusID       "PCI:2:3:0"
   Option      "AddARGBVisuals"   "True"
   Option      "AddARGBGLXVisuals"   "True"
   Option      "NoLogo"   "True"
EndSection

Section "Monitor"
   Identifier   "Monitor0"
   Option      "DPMS"
   Horizsync   30-83
   Vertrefresh   56-75
EndSection

Section "Monitor"
   Identifier    "Monitor1"
   Option       "DPMS"
   HorizSync    30-55
   VertRefresh    50-120
EndSection

Section "Screen"
   Identifier "Screen0"
   Device     "Card0"
   Monitor    "Monitor0"
   Defaultdepth   24
   SubSection "Display"
      Depth   24
      Modes  "1280x960" "1024x768" "800x600" "640x480"
   EndSubSection
EndSection

Section "Screen"
   Identifier "Screen1"
   Device     "Card1"
   Monitor    "Monitor1"
   Defaultdepth   24
   SubSection "Display"
      Depth   24
      Modes  "1024x768" "800x600" "640x480"
   EndSubSection
EndSection


Section "ServerLayout"
   Identifier   "Default Layout"
  screen "Screen0"
  screen "Screen1" RightOf "Screen0" 
   Inputdevice   "Generic Keyboard"
   Inputdevice   "Configured Mouse"
   Inputdevice   "stylus"   "SendCoreEvents"
   Inputdevice   "cursor"   "SendCoreEvents"
   Inputdevice   "eraser"   "SendCoreEvents"
EndSection

Section "DRI" [color=red]# (adoraria saber do que se trata essa)[/color]
   Mode   0666
EndSection
« Última modificação: 19 de Maio de 2007, 03:01 por mickeyknox »
Pentium IV 3.2 Prescott 2gb ram DDR 400 ATI 9200 256mb Seagate 160gb Maxtor 80gb + 22" LG Windão Pentium IV 2.8ht 2gb ram DDR400 Geforce 6200LE 256MB Seagate 250gb SATA Maxtor 160gb SATA 17" LG e mais uma ou outra..

Offline ubuntando

  • Usuário Ubuntu
  • *
  • Mensagens: 12
    • Ver perfil
Re: Ainda problemas 2 monitores - Solução e XORG FUNCIONANDO
« Resposta #4 Online: 18 de Maio de 2007, 22:45 »
Olá mickeyknox,

Gostaria de saber qual a versão de drivers que você está utilizando.

Offline mickeyknox

  • Usuário Ubuntu
  • *
  • Mensagens: 87
  • Restam menos de 3200 tigres livres no mundo!
    • Ver perfil
    • Guido Nietmann - Consultoria em Internet
Re: Ainda problemas 2 monitores - Solução e XORG FUNCIONANDO
« Resposta #5 Online: 19 de Maio de 2007, 03:02 »
Por increça que parível, a mais nova...mas to sem efeitos 3d na area de trabalho, embora os games estejam rodando bem.
Pentium IV 3.2 Prescott 2gb ram DDR 400 ATI 9200 256mb Seagate 160gb Maxtor 80gb + 22" LG Windão Pentium IV 2.8ht 2gb ram DDR400 Geforce 6200LE 256MB Seagate 250gb SATA Maxtor 160gb SATA 17" LG e mais uma ou outra..

Offline Mafs

  • Usuário Ubuntu
  • *
  • Mensagens: 1
    • Ver perfil
Re:Ainda problemas 2 monitores - Solução e XORG FUNCIONANDO
« Resposta #6 Online: 16 de Novembro de 2017, 00:47 »
Como instalou o driver correto dessa placa de vídeo. A minha é a mesma, porém ela aparece como VGA compatible.