Autor Tópico: Entrando no X de 3 formas diferentes - Problema no Beryl, no X ou no driver?  (Lida 1954 vezes)

Offline julianodorneles

  • Usuário Ubuntu
  • *
  • Mensagens: 133
    • Ver perfil
Bem pessoal, instalei o último driver da NVidia (1.0-9629) beleza ... instalei também o Beryl e coloquei o comando "beryl-manager" no início da seção do Gnome.

Agora, entro no X de 3 formas (não necessariamente nesta ordem):

- Ou o sistema congela na tela do GDM e só resetando no botão;
- Ou o sistema faz login e carrega o Gnome e o beryl, mas o processo "emerald --replace" fica fechando e abrindo de forma intermitente (confirmado isso com o "ps -xa") e assim os efeitos, bordas, etc. ficam piscando. O sistema não trava, mas não consigo matar o processo e só saindo fora e entrando novamente na seção;
- Ou o sistema entra beleza e tudo funciona 100%.

Bem, como eu disse não é sempre que isso ocorre, mas deve ter uma forma de resolver esses detalhes (ou bugs?) ... alguém está passando ou já passou por essa situação?
AMD Athlon64 3000+, Abit AX8, 1Gb RAM (2x512Mb Dual Channel), GF 6800XTreme Edition 256Mb, HD SATA 80Gb Samsung, LG 1752TX LCD.

Offline Kamei Hyoga

  • Usuário Ubuntu
  • *
  • Mensagens: 1.095
  • Ubuntu 11.04
    • Ver perfil
Re: Entrando no X de 3 formas diferentes - Problema no Beryl, no X ou no driver?
« Resposta #1 Online: 11 de Novembro de 2006, 03:19 »
Esse segundo ocorreu comigo já, mas fiz logout e ficou normal (até agora).

Offline Cond_83

  • Usuário Ubuntu
  • *
  • Mensagens: 72
    • Ver perfil
Re: Entrando no X de 3 formas diferentes - Problema no Beryl, no X ou no driver?
« Resposta #2 Online: 13 de Novembro de 2006, 10:49 »
Bem pessoal, instalei o último driver da NVidia (1.0-9629) beleza ... instalei também o Beryl e coloquei o comando "beryl-manager" no início da seção do Gnome.

Agora, entro no X de 3 formas (não necessariamente nesta ordem):

- Ou o sistema congela na tela do GDM e só resetando no botão;
- Ou o sistema faz login e carrega o Gnome e o beryl, mas o processo "emerald --replace" fica fechando e abrindo de forma intermitente (confirmado isso com o "ps -xa") e assim os efeitos, bordas, etc. ficam piscando. O sistema não trava, mas não consigo matar o processo e só saindo fora e entrando novamente na seção;
- Ou o sistema entra beleza e tudo funciona 100%.

Bem, como eu disse não é sempre que isso ocorre, mas deve ter uma forma de resolver esses detalhes (ou bugs?) ... alguém está passando ou já passou por essa situação?

Posta o seu xorg.conf para darmos uma olhada, pelo menos eu posso comparar com o meu que funcionou normalmente.
Aproveita e dá uma revisada no tutorial abaixo e veja se todos os passos foram seguidos no momento de configuração do xorg.conf
http://hamacker.wordpress.com/2006/10/19/aiglx-beryl-no-ubuntu-edgy-610/

t+

Offline julianodorneles

  • Usuário Ubuntu
  • *
  • Mensagens: 133
    • Ver perfil
Re: Entrando no X de 3 formas diferentes - Problema no Beryl, no X ou no driver?
« Resposta #3 Online: 14 de Novembro de 2006, 08:51 »
Tá aí o bixo ...

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 1.0  (buildmeister@builder3)  Wed Nov  1 19:47:17 PST 2006

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"
    Identifier     "Default Layout"
    Screen         "Default Screen" 0 0
    InputDevice    "Generic Keyboard"
    InputDevice    "Configured Mouse"
    InputDevice    "stylus" "SendCoreEvents"
    InputDevice    "cursor" "SendCoreEvents"
    InputDevice    "eraser" "SendCoreEvents"
EndSection

Section "Files"

   # path to defoma fonts
    FontPath        "/usr/share/X11/fonts/misc"
    FontPath        "/usr/share/X11/fonts/cyrillic"
    FontPath        "/usr/share/X11/fonts/100dpi/:unscaled"
    FontPath        "/usr/share/X11/fonts/75dpi/:unscaled"
    FontPath        "/usr/share/X11/fonts/Type1"
    FontPath        "/usr/share/X11/fonts/100dpi"
    FontPath        "/usr/share/X11/fonts/75dpi"
    FontPath        "/usr/share/fonts/X11/misc"
    FontPath        "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
    Load           "i2c"
    Load           "bitmap"
    Load           "ddc"
    Load           "extmod"
    Load           "freetype"
    Load           "glx"
    Load           "int10"
    Load           "type1"
    Load           "vbe"
    Load           "nvidia"
EndSection

Section "InputDevice"
    Identifier     "Generic Keyboard"
    Driver         "kbd"
    Option         "CoreKeyboard"
    Option         "XkbRules" "xorg"
    Option         "XkbModel" "abnt2"
    Option         "XkbLayout" "br"
    Option         "XkbOptions" "lv3:ralt_switch"
EndSection

Section "InputDevice"
    Identifier     "Configured Mouse"
    Driver         "mouse"
    Option         "CorePointer"
    Option         "Device" "/dev/input/mice"
    Option         "Protocol" "ExplorerPS/2"
    Option         "ZAxisMapping" "4 5"
    Option         "Emulate3Buttons" "true"
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
    Identifier     "stylus"
    Driver         "wacom"
    Option         "Device" "/dev/wacom"          # Change to
    Option         "Type" "stylus"
    Option         "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
    Identifier     "eraser"
    Driver         "wacom"
    Option         "Device" "/dev/wacom"          # Change to
    Option         "Type" "eraser"
    Option         "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
    Identifier     "cursor"
    Driver         "wacom"
    Option         "Device" "/dev/wacom"          # Change to
    Option         "Type" "cursor"
    Option         "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "Monitor"
    Identifier     "Generic Monitor"
    HorizSync       28.0 - 51.0
    VertRefresh     43.0 - 60.0
    Option         "DPMS"
EndSection

Section "Device"
    Identifier     "NVIDIA Corporation NVIDIA Default Card"
    Driver         "nvidia"
EndSection

Section "Screen"
    Identifier     "Default Screen"
    Device         "NVIDIA Corporation NVIDIA Default Card"
    Monitor        "Generic Monitor"
    DefaultDepth    24
    Option         "AddARGBGLXVisuals" "True"
    SubSection     "Display"
        Depth       1
        Modes      "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection     "Display"
        Depth       4
        Modes      "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection     "Display"
        Depth       8
        Modes      "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection     "Display"
        Depth       15
        Modes      "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection     "Display"
        Depth       16
        Modes      "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection     "Display"
        Depth       24
        Modes      "1024x768" "800x600" "640x480"
    EndSubSection
EndSection

AMD Athlon64 3000+, Abit AX8, 1Gb RAM (2x512Mb Dual Channel), GF 6800XTreme Edition 256Mb, HD SATA 80Gb Samsung, LG 1752TX LCD.

Offline Cond_83

  • Usuário Ubuntu
  • *
  • Mensagens: 72
    • Ver perfil
Re: Entrando no X de 3 formas diferentes - Problema no Beryl, no X ou no driver?
« Resposta #4 Online: 15 de Novembro de 2006, 01:00 »
Cara... tem algumas coisas faltando no seu xorg.conf contudo não sei se essa seria a causa do problema. Dá uma olhada no meu xorg abaixo e compara (sem levar em comparação o hardware é claro... hehehe)

Código: [Selecionar]
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
FontPath "/usr/share/fonts/X11/misc"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
#Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "abnt2"
Option "XkbLayout" "br"
Option "XkbVariant" "abnt2"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "stylus"
  Option        "Device"        "/dev/wacom"          # Change to
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "stylus"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "eraser"
  Option        "Device"        "/dev/wacom"          # Change to
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "eraser"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "cursor"
  Option        "Device"        "/dev/wacom"          # Change to
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "cursor"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "Device"
Identifier "NVIDIA Corporation NV17 [GeForce4 MX 420]"
Driver "nvidia"
BusID "PCI:1:0:0"
Option "RenderAccel" "true"
Option "TripleBuffer" "true"
Option "AllowGLXWithComposite" "true"
EndSection

Section "Monitor"
Identifier "COMPAQ V520b"
Option "DPMS"
EndSection

Section "Screen"
Identifier "Default Screen"
Device "NVIDIA Corporation NV17 [GeForce4 MX 420]"
Monitor "COMPAQ V520b"
DefaultDepth 24
Option "AddARGBGLXVisuals" "True"
SubSection "Display"
Depth 1
Modes "1024x768" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "720x400" "640x480"
EndSubSection
EndSection

Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice     "stylus" "SendCoreEvents"
InputDevice     "cursor" "SendCoreEvents"
InputDevice     "eraser" "SendCoreEvents"
Option "AIGLX"  "true"
EndSection

Section "DRI"
Mode 0666
EndSection

Section "Extensions"
Option "Composite" "Enable"
EndSection

Abraços