Autor Tópico: Celular Motorola no Ubuntu  (Lida 42274 vezes)

Offline Diepartus

  • Usuário Ubuntu
  • *
  • Mensagens: 56
    • Ver perfil
    • Blog
Re: Celular Motorola no Ubuntu
« Resposta #15 Online: 19 de Fevereiro de 2007, 01:32 »
Obrigado! :D
:)

Offline Daniel Neves

  • Usuário Ubuntu
  • *
  • Mensagens: 116
  • hardy :)
    • Ver perfil
    • last.fm
Re: Celular Motorola no Ubuntu
« Resposta #16 Online: 19 de Fevereiro de 2007, 01:49 »
Cara eu sei q esse tuto tah cero pq eu já consegui com ele,mas o meu continua dando

[error] Unable to open device
[error] Check preferences
[error] Unable to connect

e

Código: [Selecionar]
X Error: BadDevice, invalid or uninitialized input device 166
  Major opcode:  144
  Minor opcode:  3
  Resource id:  0x0
Failed to open device
X Error: BadDevice, invalid or uninitialized input device 166
  Major opcode:  144
  Minor opcode:  3
  Resource id:  0x0
Failed to open device
Session management error: Authentication Rejected, reason : None of the authentication protocols specified are supported and host-based authentication failed
Form1
PhoneMan
New mode: 1
doActConnect
doActConnect
P2kProc::doConnect()
doActConnect
doActConnect
P2kProc::doConnect()
(E_sendControl: no connection)
(E_sendControl: no connection)
(E_getDriveName: E001)
(E_sendControl: no connection)
(E_drw_search: E001)
(E_sendControl: no connection)
(E_drw_search: E001)
(E_sendControl: no connection)
(E_drv_suspend: E01)
(E_sendControl: no connection)
(E_drv_suspend: E01)
root@Orgulho:/home/daniel# sudo moto4lin
X Error: BadDevice, invalid or uninitialized input device 166
  Major opcode:  144
  Minor opcode:  3
  Resource id:  0x0
Failed to open device
X Error: BadDevice, invalid or uninitialized input device 166
  Major opcode:  144
  Minor opcode:  3
  Resource id:  0x0
Failed to open device
Session management error: Authentication Rejected, reason : None of the authentication protocols specified are supported and host-based authentication failed
Form1
PhoneMan
New mode: 1
doActConnect
doActConnect
P2kProc::doConnect()

no terminal,e parabéns por ter o tuto sido postado com wiki ;]


Manda teus screens passo por passo se possivel :D

Eu sei q é pedir de mais,mas se puder eu agradeceria muito.

Vlw!

Offline Pumpkins1979

  • Usuário Ubuntu
  • *
  • Mensagens: 8
    • Ver perfil
Re: Celular Motorola no Ubuntu
« Resposta #17 Online: 20 de Fevereiro de 2007, 17:40 »
Diepartus,

não consegui conectar ao celular pelas dicas, quando conecto o cabo ele abre uma tela para acesso ao celular em /media/ipod, teria algo a ver?

Cara,

Isso deve acontecer pq seu aparelho tem suporte ao AAC, o formato da apple. :-\ Até no próprio windows, se vc conectasse ele e o iTunes tivesse rodando, ele iria reconhecer o seu celular como um ipod.

O mp3 player dele é em java, ou é o proprio iTunes? ???

Offline rafasnn

  • Usuário Ubuntu
  • *
  • Mensagens: 611
    • Ver perfil
Re: Celular Motorola no Ubuntu
« Resposta #18 Online: 20 de Fevereiro de 2007, 20:53 »
é em java
Macbook Pro 2,33 4GB 250GB
iPhone 8GB

Offline fpalhares

  • Usuário Ubuntu
  • *
  • Mensagens: 52
    • Ver perfil
Re: Celular Motorola no Ubuntu
« Resposta #19 Online: 08 de Maio de 2007, 14:19 »
nao consigo instalar o p2kmoto. Por favor me ajudem!!
f@maq06:~/p2kmoto-0.1$ sudo ./configure --bindir=/usr/bin --sbindir=/usr/sbin --libdir=/usr/lib
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking whether make sets $(MAKE)... yes
checking for working aclocal-1.4... missing
checking for working autoconf... missing
checking for working automake-1.4... missing
checking for working autoheader... missing
checking for working makeinfo... missing
checking for gcc... gcc
checking for C compiler default output file name... configure: error: C compiler cannot create executables
See `config.log' for more details.
« Última modificação: 08 de Maio de 2007, 14:30 por fpalhares »

Offline ThiagoNalli

  • Usuário Ubuntu
  • *
  • Mensagens: 54
  • Conhecimento só é valido quando compartilhado
    • Ver perfil
Re: Celular Motorola no Ubuntu
« Resposta #20 Online: 19 de Maio de 2007, 01:09 »
Otimo Tutorial, é o que eu Buscava...



O Moto Pebl U6 esta 100%

Realizei testes com o V220 e 100% Também....

Abraços
Thiago
Tentando sumir com meus bits espalhados pela rede.

Offline pinduvoz

  • Usuário Ubuntu
  • *
  • Mensagens: 2.494
    • Ver perfil
Re: Celular Motorola no Ubuntu
« Resposta #21 Online: 16 de Setembro de 2007, 01:21 »
Ressuscitando...

é o seguinte:

Conectei meu Motorola V3 com kmobiletools e também com o moto4lin. O segundo serve para upload e download de arquivos do celular e o primeiro "deveria" servir para sincronizar/editar/atualizar a agenda do telefone, correto? Só que ele não tem opção nenhuma para isso ou, ao menos, eu não a encontrei.

Alguma luz?

Agradecendo,

P.
:: Linux Registered User nº 439378 ::

Offline Hide.n.Seek

  • Usuário Ubuntu
  • *
  • Mensagens: 18
  • BHS Team
    • Ver perfil
Re: Celular Motorola no Ubuntu
« Resposta #22 Online: 24 de Setembro de 2007, 22:57 »
Aqui nao deu nem sinal de vida. DE NENHUMA FORMA.

Offline Rox_Thiaguin

  • Usuário Ubuntu
  • *
  • Mensagens: 67
  • "The owls are not what they seem"
    • Ver perfil
    • Linux
Re: Celular Motorola no Ubuntu
« Resposta #23 Online: 25 de Setembro de 2007, 13:45 »
Eu tenho um V3

queria conecta-lo atravez de Bluetooth!

seria possivel?
Linux - Linux para Todos, O maior portal sobre Linux do Brasil!

Offline alsoares75

  • Usuário Ubuntu
  • *
  • Mensagens: 68
    • Ver perfil
Re: Celular Motorola no Ubuntu
« Resposta #24 Online: 26 de Setembro de 2007, 18:32 »
O A1200, é possivel configurar, pois fiz o tuto e não consegui atualizar os contatos.

Offline als

  • Usuário Ubuntu
  • *
  • Mensagens: 34
    • Ver perfil
Re: Celular Motorola no Ubuntu
« Resposta #25 Online: 06 de Outubro de 2007, 09:04 »
Existe no modelo A1200 da motorola (que usa sistema operacional Linux) a grande possibilidade de
sincronizar com o Evolution:http://www.ohli.de/?J2MESync
Segui a dica, instalei o multisync e o debian que ele indica e nada. Não consegui instalar o arquivo que ele fala para compilar, será esse o problema? O multisync funciona, habilita sincronizar com o Evolution, mas o plugin dele (J2MESync) não aparece. Pelo que entendi, tenho que ter bluetooth no micro.

Alguém possui esse aparelho, ou similar, que tenha conseguido sincronizar com o Evolution ou Kontact?

Se alguém conseguiu, por favor me informe como. Estou desesperado!!!!

Offline gugaszdiniz

  • Usuário Ubuntu
  • *
  • Mensagens: 50
    • Ver perfil
Re: Celular Motorola no Ubuntu
« Resposta #26 Online: 18 de Outubro de 2007, 23:33 »
consegui acessar o kmobiletools já vi o wiki que você indicou e no moto4lin aparece as seguintes mensagens de erro:
[info] Phone pluged as AT
Try to connect

[info] AT phone found
[info] Switching device /dev/ttyAMC0 to P2K mode...
[error] Unable to open device
[error] Please check preferences
[error] Unable to connect


Pelo wiki você tem que instalar o P2k já baixei, descompactei no Desktop e quando dou o comando pra instalar aparece as seguinte mensagens:
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking whether make sets $(MAKE)... yes
checking for working aclocal-1.4... missing
checking for working autoconf... found
checking for working automake-1.4... missing
checking for working autoheader... found
checking for working makeinfo... missing
checking for gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ANSI C... none needed
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking for a sed that does not truncate output... /bin/sed
checking for egrep... grep -E
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for /usr/bin/ld option to reload object files... -r
checking for BSD-compatible nm... /usr/bin/nm -B
checking whether ln -s works... yes
checking how to recognise dependent libraries... pass_all
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking dlfcn.h usability... yes
checking dlfcn.h presence... yes
checking for dlfcn.h... yes
checking for g++... g++
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking how to run the C++ preprocessor... g++ -E
checking for g77... no
checking for f77... no
checking for xlf... no
checking for frt... no
checking for pgf77... no
checking for fort77... no
checking for fl32... no
checking for af77... no
checking for f90... no
checking for xlf90... no
checking for pgf90... no
checking for epcf90... no
checking for f95... no
checking for fort... no
checking for xlf95... no
checking for ifc... no
checking for efc... no
checking for pgf95... no
checking for lf95... no
checking for gfortran... no
checking whether we are using the GNU Fortran 77 compiler... no
checking whether  accepts -g... no
checking the maximum length of command line arguments... 32768
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for objdir... .libs
checking for ar... ar
checking for ranlib... ranlib
checking for strip... strip
checking if gcc static flag  works... yes
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC
checking if gcc PIC flag -fPIC works... yes
checking if gcc supports -c -o file.o... yes
checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
configure: creating libtool
appending configuration tag "CXX" to libtool
checking for ld used by g++... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes
checking for g++ option to produce PIC... -fPIC
checking if g++ PIC flag -fPIC works... yes
checking if g++ supports -c -o file.o... yes
checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
appending configuration tag "F77" to libtool
configure: creating ./config.status
config.status: creating Makefile
config.status: creating src/Makefile
config.status: creating test/Makefile
config.status: creating config.h
config.status: config.h is unchanged
config.status: executing default-1 commands
make  all-recursive
Making all in src
/src'
/bin/bash ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I..     -g -O2 -c p2kmoto.c
 gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -c p2kmoto.c  -fPIC -DPIC -o .libs/p2kmoto.o
p2kmoto.c:26:17: error: usb.h: No such file or directory
p2kmoto.c:95: error: expected '=', ',', ';', 'asm' or '__attribute__' before '*' token
p2kmoto.c: In function 'p2k_getDevList':
p2kmoto.c:159: error: 'usb_dev_handle' undeclared (first use in this function)
p2kmoto.c:159: error: (Each undeclared identifier is reported only once
p2kmoto.c:159: error: for each function it appears in.)
p2kmoto.c:159: error: 'udev' undeclared (first use in this function)
p2kmoto.c:171: error: 'usb_busses' undeclared (first use in this function)
p2kmoto.c:171: error: dereferencing pointer to incomplete type
p2kmoto.c:172: error: dereferencing pointer to incomplete type
p2kmoto.c:172: error: dereferencing pointer to incomplete type
p2kmoto.c:179: error: dereferencing pointer to incomplete type
p2kmoto.c:181: error: dereferencing pointer to incomplete type
p2kmoto.c:181: error: dereferencing pointer to incomplete type
p2kmoto.c:183: error: dereferencing pointer to incomplete type
p2kmoto.c:184: error: dereferencing pointer to incomplete type
p2kmoto.c:191: error: dereferencing pointer to incomplete type
p2kmoto.c:192: error: dereferencing pointer to incomplete type
p2kmoto.c:195: error: dereferencing pointer to incomplete type
p2kmoto.c:196: error: dereferencing pointer to incomplete type
p2kmoto.c: In function 'p2k_findDevice':
p2kmoto.c:222: warning: assignment makes pointer from integer without acast
p2kmoto.c:224: error: dereferencing pointer to incomplete type
p2kmoto.c:228: error: dereferencing pointer to incomplete type
p2kmoto.c:228: error: dereferencing pointer to incomplete type
p2kmoto.c:229: error: dereferencing pointer to incomplete type
p2kmoto.c:229: error: dereferencing pointer to incomplete type
p2kmoto.c: In function 'p2k_connect':
p2kmoto.c:253: error: 'phoneHandle' undeclared (first use in this function)
p2kmoto.c: In function 'p2k_closePhone':
p2kmoto.c:274: error: 'phoneHandle' undeclared (first use in this function)
p2kmoto.c: At top level:
p2kmoto.c:314: error: expected declaration specifiers or '...' before usb_dev_handle'
p2kmoto.c: In function 'p2k_sendControl':
p2kmoto.c:318: error: 'dev' undeclared (first use in this function)
p2kmoto.c: In function 'p2k_outData':
p2kmoto.c:358: error: 'phoneHandle' undeclared (first use in this function)
p2kmoto.c:358: warning: passing argument 6 of 'p2k_sendControl' makes pointer from integer without a cast
p2kmoto.c:358: warning: passing argument 7 of 'p2k_sendControl' makes integer from pointer without a cast
p2kmoto.c:358: error: too many arguments to function 'p2k_sendControl'
p2kmoto.c: In function 'p2k_inpSize':
p2kmoto.c:374: error: 'phoneHandle' undeclared (first use in this function)
p2kmoto.c:374: warning: passing argument 6 of 'p2k_sendControl' makes pointer from integer without a cast
p2kmoto.c:374: warning: passing argument 7 of 'p2k_sendControl' makes integer from pointer without a cast
p2kmoto.c:374: error: too many arguments to function 'p2k_sendControl'
p2kmoto.c: In function 'p2k_inpData':
p2kmoto.c:408: error: 'phoneHandle' undeclared (first use in this function)
p2kmoto.c:408: warning: passing argument 6 of 'p2k_sendControl' makes pointer from integer without a cast
p2kmoto.c:408: warning: passing argument 7 of 'p2k_sendControl' makes integer from pointer without a cast
p2kmoto.c:408: error: too many arguments to function 'p2k_sendControl'
make[2]: ** [p2kmoto.lo] Erro 1
make[1]: ** [all-recursive] Erro 1
make: ** [all-recursive-am] Erro 2
« Última modificação: 18 de Outubro de 2007, 23:40 por gugaszdiniz »
Gustavo Souza Z. Diniz

Offline gugaszdiniz

  • Usuário Ubuntu
  • *
  • Mensagens: 50
    • Ver perfil
Re: Celular Motorola no Ubuntu
« Resposta #27 Online: 20 de Outubro de 2007, 22:34 »
O P2KMOTO antes de instalar pede pra voce gerar o script mas quan dou o comando apt-get install libqt-headers libqt-mt-dev libqtc102 libqtc102-mt qt3-designer qt3-dev-tools gcc make retorna a mensagem: impossivel achar libqtc-headres.
Se alguem puder me ajudar ficaria agradecido
Gustavo Souza Z. Diniz

Offline Self_Control

  • Usuário Ubuntu
  • *
  • Mensagens: 28
    • Ver perfil
Re: Celular Motorola no Ubuntu
« Resposta #28 Online: 26 de Outubro de 2007, 12:05 »
Deu certo no motorola L6, testado no Ubuntu 7.10 Gutsy Gibbon
Tentei várias vezes no rwindows mas sempre o linux dá um jeito.
Parabéns pelo tópico.
« Última modificação: 26 de Outubro de 2007, 12:19 por Self_Control »

Offline vampire_thunder

  • Usuário Ubuntu
  • *
  • Mensagens: 735
    • Ver perfil
Re: Celular Motorola no Ubuntu
« Resposta #29 Online: 26 de Outubro de 2007, 18:17 »
Não funciona no Moto Q. Alguém sabe como colocar para funcionar?

(M* de Windows Mobile)