Tudo bem pessoal, ano passado como a maioria dos usuários do ubuntu, instalei o 7.10, tava tudo bem, com alguns bug's q me aborreciam, mas até ai, não me importava muito, até que me deparei com isso...
http://alexblog.eeol.org/linux/aumentando-a-vida-util-dos-hds/Um problema do ubuntu, acho que posso chamar assim, que diminuia a vida util do hd, como está descrito nesse blogue, tentei verificar se isso estava acontecendo aqui, infelismente sem sucesso pois a chamada
sudo smartctl -A /dev/sda | grep Load_Cycle_Count
não me retornava nada, achei que por meu pc ser mais antigo e o hd também e claro, estava livre desse problema e continuei usando o ubuntu mesmo assim, ai que no final do ano, meu hd se encheu de badblock, começou a esquentar muito, mais que o normal, e não consegui resolver mais esse problema, fiquei 1 mês sem pc, até compra outro hd...
Bom essa é minha história de prejuizo, não sei se por causa do ubuntu ou por outro motivo, mas aconteu tempos depois de eu começar a usar o 7.10, e pouco tempo depois de eu ler o blog.
O que eu na verdade quero saber, é que comprei um novo hd, sata 250GB, e instalei o 8.04 em teste agora, e novamente o comando não me retorna nada....
emerson@emerson-desktop:~$ sudo smartctl -A /dev/sda | grep Load_Cycle_Count
emerson@emerson-desktop:~$ sudo smartctl -A /dev/sda1 | grep Load_Cycle_Count
emerson@emerson-desktop:~$ sudo smartctl -a /dev/sda
smartctl version 5.37 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Model Family: SAMSUNG SpinPoint P80 series
Device Model: SAMSUNG SP0842N
Serial Number: S0DWJ10YB19847
Firmware Version: BH100-35
User Capacity: 80,026,361,856 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 7
ATA Standard is: ATA/ATAPI-7 T13 1532D revision 4a
Local Time is: Thu Feb 28 18:20:54 2008 BRT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (1802) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 30) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 253 093 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0007 100 100 025 Pre-fail Always - 4032
4 Start_Stop_Count 0x0032 094 094 000 Old_age Always - 6633
5 Reallocated_Sector_Ct 0x0033 085 085 010 Pre-fail Always - 144
7 Seek_Error_Rate 0x000f 253 253 051 Pre-fail Always - 0
8 Seek_Time_Performance 0x0025 253 253 015 Pre-fail Offline - 0
9 Power_On_Half_Minutes 0x0032 100 100 000 Old_age Always - 52h+41m
10 Spin_Retry_Count 0x0033 253 253 051 Pre-fail Always - 0
11 Calibration_Retry_Count 0x0012 253 253 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 097 097 000 Old_age Always - 3585
187 Unknown_Attribute 0x0032 001 001 000 Old_age Always - 1379051
190 Temperature_Celsius 0x0022 070 055 045 Old_age Always - 56
194 Temperature_Celsius 0x0022 070 055 000 Old_age Always - 56
195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 5787
196 Reallocated_Event_Count 0x0032 085 085 000 Old_age Always - 144
197 Current_Pending_Sector 0x0012 089 089 000 Old_age Always - 103
198 Offline_Uncorrectable 0x0030 253 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x000a 253 100 000 Old_age Always - 0
201 Soft_Read_Error_Rate 0x000a 253 001 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 2912 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 2912 occurred at disk power-on lifetime: 5957 hours (248 days + 5 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 80 7f b7 db e0 Error: UNC at LBA = 0x00dbb77f = 14399359
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
40 d0 80 7f b7 db e0 00 04:49:23.313 READ VERIFY SECTOR(S)
40 d0 80 ff b3 db e0 00 04:49:23.313 READ VERIFY SECTOR(S)
c8 d0 01 00 00 00 e0 00 04:49:23.313 READ DMA
c8 d0 01 00 00 00 e0 00 04:49:23.313 READ DMA
c8 d0 01 00 00 00 e0 00 04:49:23.313 READ DMA
Error 2911 occurred at disk power-on lifetime: 5957 hours (248 days + 5 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 80 7f b3 db e0 Error: UNC at LBA = 0x00dbb37f = 14398335
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
40 d0 80 7f b3 db e0 00 04:49:21.438 READ VERIFY SECTOR(S)
b0 d0 01 01 4f c2 a0 00 04:49:21.375 SMART READ DATA
Error 2910 occurred at disk power-on lifetime: 5957 hours (248 days + 5 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 80 ff af db e0 Error: UNC at LBA = 0x00dbafff = 14397439
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
40 d0 80 ff af db e0 00 04:49:19.563 READ VERIFY SECTOR(S)
40 d0 80 7f af db e0 00 04:49:19.500 READ VERIFY SECTOR(S)
c8 d0 01 00 00 00 e0 00 04:49:19.500 READ DMA
c8 d0 01 00 00 00 e0 00 04:49:19.500 READ DMA
c8 d0 01 00 00 00 e0 00 04:49:19.500 READ DMA
Error 2909 occurred at disk power-on lifetime: 5957 hours (248 days + 5 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 80 ff ab db e0 Error: UNC at LBA = 0x00dbabff = 14396415
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
40 d0 80 ff ab db e0 00 04:49:17.688 READ VERIFY SECTOR(S)
40 d0 80 7f ab db e0 00 04:49:17.688 READ VERIFY SECTOR(S)
c8 d0 01 00 00 00 e0 00 04:49:17.688 READ DMA
c8 d0 01 00 00 00 e0 00 04:49:17.688 READ DMA
c8 d0 01 00 00 00 e0 00 04:49:17.688 READ DMA
Error 2908 occurred at disk power-on lifetime: 5957 hours (248 days + 5 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 80 ff a7 db e0 Error: UNC at LBA = 0x00dba7ff = 14395391
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
40 d0 80 ff a7 db e0 00 04:49:15.813 READ VERIFY SECTOR(S)
40 d0 80 7f a7 db e0 00 04:49:15.813 READ VERIFY SECTOR(S)
40 d0 80 ff 9f db e0 00 04:49:15.813 READ VERIFY SECTOR(S)
c8 d0 01 00 00 00 e0 00 04:49:15.813 READ DMA
c8 d0 01 00 00 00 e0 00 04:49:15.813 READ DMA
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective Self-Test Log Data Structure Revision Number (0) should be 1
SMART Selective self-test log data structure revision number 0
Warning: ATA Specification requires selective self-test log data structure revision number = 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
emerson@emerson-desktop:~$
e agora, o que eu faço??? alguém sabe se o problema foi resolvido??? Desde já agradeço!!!
A esse eh o do hd de 80, o q ta estragado, ele ainda ta na minha maquina mas não adianta, se eu tento salva alguma coisa nele, ou da erro na hora de escreve ou da erro na hora de lê...
emerson@emerson-desktop:~$ sudo smartctl -A /dev/sdb | grep Load_Cycle_Count
emerson@emerson-desktop:~$ sudo smartctl -a /dev/sdb
smartctl version 5.37 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Device Model: SAMSUNG HD250HJ
Serial Number: S19GJ56P903022
Firmware Version: FH100-05
User Capacity: 250,059,350,016 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 7
ATA Standard is: Not recognized. Minor revision code: 0x52
Local Time is: Thu Feb 28 19:14:32 2008 BRT
==> WARNING: May need -F samsung or -F samsung2 enabled; see manual for details.
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x02) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (3572) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 60) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 100 100 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0007 253 253 025 Pre-fail Always - 4288
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 401
5 Reallocated_Sector_Ct 0x0033 253 253 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 253 253 051 Pre-fail Always - 0
8 Seek_Time_Performance 0x0025 253 253 015 Pre-fail Offline - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 498
10 Spin_Retry_Count 0x0033 253 253 051 Pre-fail Always - 0
11 Calibration_Retry_Count 0x0012 253 253 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 276
13 Read_Soft_Error_Rate 0x000e 100 100 000 Old_age Always - 15316962
184 Unknown_Attribute 0x0033 253 253 099 Pre-fail Always - 0
187 Unknown_Attribute 0x0032 253 253 000 Old_age Always - 0
188 Unknown_Attribute 0x0032 253 253 000 Old_age Always - 0
190 Temperature_Celsius 0x0022 112 103 000 Old_age Always - 756154410
194 Temperature_Celsius 0x0022 112 100 000 Old_age Always - 42 (Lifetime Min/Max 0/11794)
195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 15316962
196 Reallocated_Event_Count 0x0032 253 253 000 Old_age Always - 0
197 Current_Pending_Sector 0x0012 253 253 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 253 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 1
200 Multi_Zone_Error_Rate 0x000a 100 100 000 Old_age Always - 0
201 Soft_Read_Error_Rate 0x000a 100 100 000 Old_age Always - 0
202 TA_Increase_Count 0x0032 253 253 000 Old_age Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective Self-Test Log Data Structure Revision Number (0) should be 1
SMART Selective self-test log data structure revision number 0
Warning: ATA Specification requires selective self-test log data structure revision number = 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
emerson@emerson-desktop:~$
esse é do meu novo hd, aliais, vc's poderião verificar isso ai no hd de vc's também só por desincargo de consiencia.