Resultado
daniel@ubuntu:~$ sudo /etc/init.d/sl-modem-daemon restart
[sudo] password for daniel:
Shutting down SmartLink Modem driver normally ... no slmodemd daemon running.
Unloading modem driver from kernel ... slamr.
Starting SmartLink Modem driver for: slamr0.
Creating /dev/modem symlink, pointing to: /dev/ttySL0.
daniel@ubuntu:~$
Ai tentei conectar e não deu certo.
Apareceu a seguinte mensagem no discador:
Can Not Open modem.
Outros Resultados
daniel@ubuntu:~$ dmesg | grep slamr
[ 40.283371] slamr: module license 'Smart Link Ltd.' taints kernel.
[ 40.290246] slamr: SmartLink AMRMO modem.
[ 40.290366] slamr: probe 1057:3052 SL1900 card...
[ 40.617399] slamr: cannot init card.
[ 338.740570] slamr: SmartLink AMRMO modem.
[ 338.743749] slamr: probe 1057:3052 SL1900 card...
[ 338.913939] slamr: cannot init card.
ps -aux | grep slmodemd
daniel@ubuntu:~$ ps -aux | grep slmodemd
Warning: bad ps syntax, perhaps a bogus '-'? See
http://procps.sf.net/faq.html daniel 5605 0.0 0.4 2984 772 pts/1 R+ 13:01 0:00 grep slmodemd
daniel@ubuntu:~$ ps -aux | grep slmodemd
Warning: bad ps syntax, perhaps a bogus '-'? See
http://procps.sf.net/faq.html daniel 5608 0.0 0.4 2988 764 pts/1 R+ 13:02 0:00 grep slmodemd
lsmod
daniel@ubuntu:~$ lsmod
Module Size Used by
slamr 433576 0
ipv6 273892 8
nls_cp437 6784 1
isofs 36412 1
udf 87204 0
rfcomm 42136 2
l2cap 26240 11 rfcomm
bluetooth 57060 4 rfcomm,l2cap
ppdev 10244 0
speedstep_lib 6404 0
cpufreq_userspace 5280 0
cpufreq_powersave 2688 0
cpufreq_ondemand 9612 0
cpufreq_stats 7232 0
freq_table 5792 2 cpufreq_ondemand,cpufreq_stats
cpufreq_conservative 8072 0
container 5504 0
button 8976 0
sbs 19592 0
video 18060 0
dock 10656 0
ac 6148 0
battery 11012 0
lp 12580 0
loop 19076 0
snd_via82xx 29336 1
gameport 16776 1 snd_via82xx
snd_ac97_codec 100644 1 snd_via82xx
ac97_bus 3200 1 snd_ac97_codec
snd_pcm_oss 44672 0
snd_mixer_oss 17664 1 snd_pcm_oss
snd_pcm 80388 3 snd_via82xx,snd_ac97_codec,snd_pcm_oss
snd_page_alloc 11400 2 snd_via82xx,snd_pcm
snd_mpu401_uart 9600 1 snd_via82xx
snd_seq_dummy 4740 0
snd_seq_oss 33152 0
snd_seq_midi 9600 0
snd_rawmidi 25728 2 snd_mpu401_uart,snd_seq_midi
snd_seq_midi_event 8448 2 snd_seq_oss,snd_seq_midi
snd_seq 53232 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer 24324 2 snd_pcm,snd_seq
snd_seq_device 9228 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
parport_pc 37412 1
serio_raw 8068 0
parport 37448 3 ppdev,lp,parport_pc
snd 54660 13 snd_via82xx,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_mpu401_uart,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
pcspkr 4224 0
psmouse 39952 0
i2c_viapro 10004 0
soundcore 8800 1 snd
i2c_core 26112 1 i2c_viapro
ungrab_winmodem 3712 0
shpchp 34580 0
pci_hotplug 32704 1 shpchp
via_agp 11264 1
agpgart 35016 1 via_agp
evdev 11136 4
ext3 133896 2
jbd 60456 1 ext3
mbcache 9732 1 ext3
sg 36764 0
sd_mod 30336 5
ide_cd 32672 1
cdrom 37536 1 ide_cd
floppy 60004 0
via_rhine 25992 0
mii 6528 1 via_rhine
ehci_hcd 36492 0
sata_via 12548 4
uhci_hcd 26640 0
usbcore 138632 3 ehci_hcd,uhci_hcd
via82cxxx 10372 0 [permanent]
ide_core 116804 2 ide_cd,via82cxxx
ata_generic 8452 0
libata 125168 2 sata_via,ata_generic
scsi_mod 147084 3 sg,sd_mod,libata
thermal 14344 0
processor 32072 1 thermal
fan 5764 0
fuse 47124 3
apparmor 40728 0
commoncap 8320 1 apparmor
lspci
daniel@ubuntu:~$ lspci
00:00.0 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge
00:00.1 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge
00:00.2 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge
00:00.3 Host bridge: VIA Technologies, Inc. PT890 Host Bridge
00:00.4 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge
00:00.7 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge
00:0a.0 Modem: Motorola SM56 Data Fax Modem (rev 04)
00:0f.0 IDE interface: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80)
00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South]
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60)
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 78)
01:00.0 VGA compatible controller: VIA Technologies, Inc. UniChrome Pro IGP (rev 01)
lspci -d
daniel@ubuntu:~$ lspci -d
lspci: option requires an argument -- d
Usage: lspci [<switches>]
-v Be verbose
-n Show numeric ID's
-nn Show both textual and numeric ID's (names & numbers)
-b Bus-centric view (PCI addresses and IRQ's instead of those seen by the CPU)
-x Show hex-dump of the standard portion of config space
-xxx Show hex-dump of the whole config space (dangerous; root only)
-xxxx Show hex-dump of the 4096-byte extended config space (root only)
-s [[[[<domain>]:]<bus>]:][<slot>][.[<func>]] Show only devices in selected slots
-d [<vendor>]:[<device>] Show only selected devices
-t Show bus tree
-m Produce machine-readable output
-i <file> Use specified ID database instead of /usr/share/misc/pci.ids.gz
-D Always show domain numbers
-M Enable `bus mapping' mode (dangerous; root only)
-P <dir> Use specified directory instead of /proc/bus/pci
-H <mode> Use direct hardware access (<mode> = 1 or 2)
-F <file> Read configuration data from given file
-G Enable PCI access debugging