Pra quem usa o Conky, postem aqui seus ".conkyrc" com foto da tela

[adrianojbr]

Pessoal..tô com alguns problemas aqui no conky....

1- qualquer palavra que tenha acento ou "ç" ele não mostra direito.. Ex: março, terça, calendário... o que pode ser? já instalei a fonte tudo certinho....

Adiciona a seguinte linha no início (antes de TEXT) do .conkyrc:
override_utf8_locale yes

2- ele fica no canto direito, eu queria se possível que ele ficasse fixo... tipo, quando eu maximizar alguma janela, não ficar em cima dele, é possível?

Não entendi direito. Tu queres que a janela maximizada respeito o limite do conky (do mesmo modo como se ele fosse um painel) ou que o conky fique sobreposto às janelas maximizadas?

Vlw.

[adrianojbr]

(...)

meu conky:

#Conky sample configuration


(...)

Faltou a captura de tela.

[adrianojbr]

(...)

1- No que diz respeito a imagens geradas na imagem faço download de um pacote de fonte no qual tem a figura do pinguim, como faço par escolher no pacote tal imagem. porque quando menciono uma determinada fonte e escrevo uma palavra esta segue o padrão da fonte. mas e a imagem como chamar esta imagem ? não sei se me fiz entender?

(...)

(...)

 Tirando suas duvidas;

1- Vc deve de ter visto no texto do .conkyrc que quando eu chamei uma fonte de imagem usei uma letra correspondente a imagem da fonte, exemplo: ${font Erotica CD:size=70}a ---> o nome da fonte é "Erotica CD" e a letra "a" é o que corresponde a tal imagem que quiz usar no progeto, pra vc uzar a fonte de imagem preferencial vc terá de testar chamando de "a" a "z" entre letras minusculas e maiusculas.

De modo mais prático, use o aplicativo "Mapa de caracteres" (gucharmap). Ao selecionar o caracter desejado, na barra de status (inferior), aparece qual letra deve ser usada.

No exemplo abaixo, a letra que corresponde ao "tux" é "t minúsculo" (SMALL LETTER T), veja:



Vlw.

[adrianojbr]

Agora segue o screen de como está o conky por essas bandas:


Tudo o que eu fiz, foi retirado aqui desse tópico. Assim, os scripts que uso já estão disponíveis aqui no fórum.

Os arquivos de configuração são os seguintes:

~/.conky_start.sh

Código: [Selecionar]

#!/bin/bash
sleep 30 && conky -c $HOME/.conkyrc &
sleep 30 && conky -c $HOME/.conkyrc3 ;
~/.conkyrc

Código: [Selecionar]

######################
# - Conky settings - #
######################
update_interval 1
total_run_times 0
net_avg_samples 1
cpu_avg_samples 1

imlib_cache_size 0
double_buffer yes
no_buffers yes

#####################
# - Text settings - #
#####################
use_xft yes
xftfont Liberation Sans:size=8
override_utf8_locale yes
text_buffer_size 2048

#############################
# - Window specifications - #
#############################
own_window_class Conky
own_window yes
own_window_type override
own_window_transparent yes
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager

alignment top_right
gap_x 10
gap_y 20
minimum_size 182 0
maximum_width 182

default_bar_size 60 8

#########################
# - Graphics settings - #
#########################
draw_shades no

default_color cccccc

color0 white
color1 5B91FD
color2 white

TEXT
${font}${voffset 0}${color}${font OpenLogos:size=60}v
##############
# - SYSTEM - #
##############
${font Liberation Sans:style=Bold:size=8}${voffset -100}SISTEMA $stippled_hr${font}
${color0}${voffset 6}${font OpenLogos:size=19}t${font}${color}${goto 32}${voffset -14}Kernel:  ${alignr}${color2}${kernel}${color}
${goto 32}Atividade: ${alignr}${color2}${uptime}${color}
# |--CPU
${offset 1}${color0}${font Poky:size=16}P${font}${offset -19}${voffset 9}${cpubar cpu0 4,18}${color}${voffset -16}${goto 32}CPU1: ${font Liberation Sans:style=Bold:size=8}${color1}${cpu cpu1}%${color}${font} ${alignr} ${color2}${cpugraph cpu1 8,60 262729 87CEFA}${color}
${goto 32}CPU2: ${font Liberation Sans:style=Bold:size=8}${color1}${cpu cpu2}%${color}${font} ${alignr} ${color2}${cpugraph cpu2 8,60 262729 87CEFA}${color}
${voffset 4}${color0}${font Weather:size=15} y${font}${color}${voffset -3}${goto 32}Temperatura: ${font Liberation Sans:style=Bold:size=8}${color1}${acpitemp}°C
# |--MEM
${color0}${font Poky:size=16}M${font}${color}${goto 32}${voffset -7}RAM: ${font Liberation Sans:style=Bold:size=8}${color1}$memperc%${color}${font}
${offset 1}${voffset 2}${color0}${membar 4,18}${color}${goto 32}${voffset -2}L: ${color2}${memeasyfree}${color} U: ${color2}${mem}${color}
# |--BATTERY
${color0}${font Poky:size=13}E${font}${color}${goto 32}${voffset -5}Bateria: ${font Liberation Sans:style=Bold:size=8}${color1}${battery_percent BAT1}%${color}${font} ${alignr}${color2}${battery_bar 8,60 BAT1}${color}
#############
# - CLOCK - #
#############
${voffset 4}${font Liberation Sans:style=Bold:size=8}DATA E HORA $stippled_hr${font}
${voffset -12}${goto 28}${font Arial Black:size=38}${color2}${time %H}${color}${font}${voffset -28}${font Liberation Sans:style=Bold:size=11}${color2}${time :%M}${time :%S}${color}${font}
${voffset -2}${goto 100}${font Liberation Sans:style=Bold:size=8}${color2}${time %A}${color}${font}
${goto 100}${time %d %b %Y}
##########
# - HD - #
##########
${voffset 4}${font Liberation Sans:style=Bold:size=8}HD $stippled_hr${font}
# |--HDTEMP1
${voffset 4}${color0}${font Weather:size=15} y${font}${color}${voffset -3}${goto 32}Temperatura: ${font Liberation Sans:style=Bold:size=8}${color1}${execi 120 hddtemp /dev/sda -n --unit=C}°C${color}${font}${alignr}${color2}/dev/sda${color}
${execpi 30 ~/.conkycolors/bin/conkyHD1}
###############
# - NETWORK - #
###############
${voffset 4}${font Liberation Sans:style=Bold:size=8}REDE $stippled_hr${font}
# |--PPP0
$alignc Claro 3G
${voffset 0}${color0}${font VariShapes Solid:size=14}q${font}${color}${goto 32}${voffset -6}Up: ${font Liberation Sans:style=Bold:size=8}${color1}${upspeedf ppp0}KiB/s${color}${font} ${alignr}${color2}${upspeedgraph ppp0 8,60 000000 93C9EB}${color}
${goto 32}Total: ${color2}${totalup ppp0}${color}
${voffset 0}${color0}${font VariShapes Solid:size=14}Q${font}${color}${goto 32}${voffset -6}Down: ${font Liberation Sans:style=Bold:size=8}${color1}${downspeedf ppp0}KiB/s${color}${font} ${alignr}${color2}${downspeedgraph ppp0 8,60 000000 93C9EB}${color}
${goto 32}Total: ${color2}${totaldown ppp0}${color}
${voffset 0}${color0}${font Poky:size=13}w${font}${color}${goto 32}${voffset -4}IP: ${alignr}${color2}${addr ppp0}${color}
${voffset -4}${color0}${font Martin Vogel's Symbols:size=18}B${font}${color}${goto 32}Gmail (adrianojbr): ${execi 100 sh ~/.conkycolors/gmail.sh}
${voffset -8}${color0}${font Martin Vogel's Symbols:size=18}B${font}${color}${goto 32}Gmail (diego): ${execi 100 sh ~/.conkycolors/gmail2.sh}
###############
# - WEATHER - #
###############
# For a working weather script you NEED to define, in a user specific config file, a partner id and registration code for the weather.com xoap service. For this purpose copy .conkyForecast.config in ~/.conkycolors folder to your home and setup as required.
# http://www.weather.com/services/xmloap.html
${voffset 4}${font Liberation Sans:style=Bold:size=8}TEMPO $stippled_hr${font}
${alignc}${font}${color}Blumenau - Brasil
# |--WLAN0
${if_up wlan0}
${execpi 10800 ~/.conkycolors/bin/conkyForecast --location=BRXX0037 -t ~/.conkycolors/templates/conkyForecast.template}
# |--ETH0
${else}${if_up eth0}
${execpi 10800 ~/.conkycolors/bin/conkyForecast --location=BRXX0037 -t ~/.conkycolors/templates/conkyForecast.template}
# |--PPP0
${endif}${else}${if_up ppp0}
${execpi 10800 ~/.conkycolors/bin/conkyForecast --location=BRXX0037 -t ~/.conkycolors/templates/conkyForecast.template}
${endif}${else}${voffset 4}${color0}${font PizzaDude Bullets:size=12}4${font}${color}${goto 32}Tempo indisponível${endif}${endif}
~/.conkyrc3

Código: [Selecionar]

# Google Notícias
######################
# - Conky settings - #
######################
update_interval 1.0


double_buffer yes

use_spacer right

#####################
# - Text settings - #
#####################
use_xft yes
xftfont LuzSans Medium:size=8
override_utf8_locale yes
xftalpha 0.1
text_buffer_size 2048

#############################
# - Window specifications - #
#############################
own_window yes
#own_window_type normal
own_window_type override
own_window_transparent yes
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager

#alignment top_left
alignment top_right
#alignment bottom_left
#alignment bottom_right
gap_x 400
gap_y 45
# minimum_size 100 5

#########################
# - Graphics settings - #
#########################
draw_shades yes
draw_outline no
draw_borders no
uppercase no

stippled_borders 0

border_inner_margin 9

border_width 10

default_color grey


TEXT
${font LuzSans Medium:size=14}${color ffffff}Google Notícias${font}
${color #404040}${hr 2}${color}
${font}${rss http://news.google.com.br/?output=rss 10 item_title 0}
${font}${rss http://news.google.com.br/?output=rss 10 item_title 1}
${font}${rss http://news.google.com.br/?output=rss 10 item_title 2}
${font}${rss http://news.google.com.br/?output=rss 10 item_title 3}
${font}${rss http://news.google.com.br/?output=rss 10 item_title 4}
${font}${rss http://news.google.com.br/?output=rss 10 item_title 5}
${font}${rss http://news.google.com.br/?output=rss 10 item_title 6}
${font}${rss http://news.google.com.br/?output=rss 10 item_title 7}
${font}${rss http://news.google.com.br/?output=rss 10 item_title 8}
${font}${rss http://news.google.com.br/?output=rss 10 item_title 9}
${font}${rss http://news.google.com.br/?output=rss 10 item_title 10}

[RUDR1GO]

Tou usando o conkyrc e scripts que peguei desde site http://groups.google.com/group/linuxchillan/browse_thread/thread/749c051e3beb9c09?pli=1

Bem, fiz tudo como manda o figurino, mas não consigo exibir a metereologia da minha cidade. Alguém pode ajudar?




Meu conkyrc

Código: [Selecionar]

use_xft yes
xftfont verdana:size=8
alignment top_right
xftalpha 0.8
own_window yes
own_window_type override
own_window_transparent yes
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager
double_buffer yes
draw_shades no
draw_outline no
draw_borders no
stippled_borders 10
border_margin 4
border_width 1
default_shade_color grey
default_outline_color black
default_color BADCDD
use_spacer none
no_buffers yes
uppercase no
color1 F8DF58



TEXT
 ${color 6694B2}${font OpenLogos:size=45} u t
${color BADCDD}${font weather:size=82}${execi 600 ~/scripts/conditions.sh}${color}${font}${voffset -25}  ${execi 1200 ~/scripts/pogodynka.sh}

   ${font weather:size=28}x ${font}HDD ${execi 1 ~/scripts/hddmonit.sh}°C
    
   ${font PizzaDude Bullets:size=16}v${font}   Up: ${upspeed eth1} Kb/s
   ${font PizzaDude Bullets:size=16}r${font}   Down: ${downspeed eth1} Kb/s

   ${font PizzaDude Bullets:size=16}M${font}   Upload: ${totalup eth1}
   ${font PizzaDude Bullets:size=16}S${font}   Download: ${totaldown eth1}

   ${color ffffff}${font StyleBats:size=16}A${font}  CPU0: ${cpu cpu0}% ${cpubar cpu0}
   ${font StyleBats:size=16}A${font}  CPU1: ${cpu cpu1}% ${cpubar cpu1}

   ${color F8DF58}${font StyleBats:size=16}8${font}  Battery: ${battery_percent}% ${battery_bar}

   ${color F8DF58}${font FreeSans:size=16}@${font}${execpi 300 python ~/scripts/gmail_parser.py email@gmail.com senhadogmail 3}

   ${color C2E078}${font PizzaDude Bullets:size=16}J${font}   $mem / $memmax

   ${font StyleBats:size=18}P${font}  Work:  ${uptime_short}


 ${font Radio Space:size=14}${time %A %d %Y}
      ${font Radio Space:size=55}${time %H:%M}

Script pogodynka.sh (utilizado para exibir o clima)

Código: [Selecionar]

# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
# #
# Pogodynka 0.2.2.1 #
# #
# azhag (azhag@bsd.miki.eu.org) #
# #
# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
# #
# Skrypt pobiera informacje o stanie pogody ze strony weather.yahoo.com dla danego miasta, nastêpnie formatuje je i #
# wy¶wietla na ekranie. Skrypt mo¿e byæ wykorzystany np. w conky'm, xosd, *message. #
# #
# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
# #
# Wymagane aplikacje: #
# w3m - tekstowa przegl±darka www #
# #
# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
# #
# Przed u¿yciem skryptu nale¿y ustaliæ zmienne "sciezka" oraz "kod". #
# #
# Aby ustaliæ kod swojego miasta wejd¿ na stronê http://weather.yahoo.com/ i wyszukaj tam swoje miasto. Kodem jest #
# koñcówka linka z pogod± naszego miasta. #
# #
# Przyk³adowe kody: #
# Warszawa - PLXX0028 #
# Kraków - PLXX0012 #
# Gdañsk - PLXX0005 #
# Szczecin - PLXX0025 #
# #
# Informacjê jak± wy¶wietla skrypt mo¿na zmieniæ haszuj±c odpowiednie linijki w sekcji "formatowanie informacji #
# wyj¶ciowej". Mo¿na równie¿ w ³atwy sposób sformatowaæ w³asny wynik u¿ywaj±c dostepnych zmiennych. #
# #
# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #

#!/bin/bash

# Katalog, w którym znajduje siê skrypt
sciezka=~/scripts

# Kod miasta
kod=BRXX1303

plik=~/weather
# sprawdzenie czy serwer jest dostêpny
#if [ `ping -c1 216.109.126.70 | grep from | wc -l` -eq 0 ]
 # then
#echo "Serwis niedostêpny"
  #else
# pobieranie informacji
  w3m -dump http://weather.yahoo.com/forecast/"$kod"_C.html | grep -A21 "Current" | sed 's/DEG/°/g' > $plik

# ustalenie warto¶ci zmiennych
stan=`head -n3 $plik | tail -n1`
temp=`tail -n1 $plik | awk '{print $1}'`
tempo=`head -n6 $plik | tail -n1`
cisn=`head -n8 $plik | tail -n1`
wiatr=`head -n16 $plik | tail -n1`
wilg=`head -n10 $plik | tail -n1`
wsch=`head -n18 $plik | tail -n1`
zach=`head -n20 $plik | tail -n1`
if [ `cat "$sciezka"/pogodynka.sh | grep -x "# $stan" | wc -l` -eq 0 ]
 then
stanpl=$stan
 else
stanpl=`cat "$sciezka"/pogodynka.sh | grep -xA1 "# $stan" | tail -n1 | awk '{print $2,$3,$4,$5,$6,$7}'`
fi

# formatowanie informacji wyj¶ciowej
# dostêpne zmienne:
# $stan opis stanu po angielsku
# $stanpl opis stanu po polsku
# $temp temperatura powietrza
# $tempo temperatura odczuwalna
# $cisn ci¶nienie atmosferyczne
# $wiatr kierunek, si³a wiatru
# $wilg wilgotno¶æ powietrza
# $wsch godzina wschodu s³oñca
# $zach godzina zachodu s³oñca

#echo $stan
#echo $stanpl
echo $temp F  /  $tempo F
#echo Cisnienie $cisn hPa
#echo $wiatr
#echo Wilgotno¶æ: $wilg
#echo Wschód S³oñca: $wsch
#echo Zachód S³oñca: $zach
#echo $stanpl, $temp C

#fi

# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
#
# T³umaczenia stanów pogody.
# Je¿eli zauwa¿ysz pogodê, której nie ma jeszcze na liscie daj mi znaæ na maila podanego na górze. Z góry dziêkujê.
#
# Sunny
# S³onecznie
# Clear
# Przejrzy¶cie
# Fair
# Pogodnie
# Sunny/Windy
# S³onecznie/Wiatr
# Clear/Windy
# Przejrzy¶cie/Wiatr
# Fair/Windy
# Przejrzy¶cie/Wiatr
# Windy
# Wiatr
#
# Partly Cloudy
# Czê¶ciowo pochmurnie
# Partly Cloudy and Windy
# Czê¶ciowo pochmurnie/Wiatr
# Partly Sunny
# Czê¶ciowo s³onecznie
# Mostly Clear
# Przew. przejrzy¶cie
# Partly Sunny/Windy
# Czê¶ciowo s³onecznie/Wiatr
# Mostly Clear/Windy
# Przew. przejrzy¶cie/Wiatr
# Mostly Sunny
# Przew. p³onecznie
# Mostly Sunny/Windy
# Przew. s³onecznie/Wiatr
# Scattered Clouds
# Rzadkie ob³oki
#
# Cloudy
# Pochmurnie
# Overcast
# Ca³k. zachmurzenie
# Cloudy/Windy
# Pochmurnie/Wiatr
# Overcast/Windy
# Ca³k. zachmurzenie/Wiatr
# Mostly Cloudy/Windy
# Przew. pochmurnie/Wiatr
# Mostly Cloudy
# Przew. pochmurnie
# Am Clouds / Pm Sun
# Ranek pochmurny/S³oneczne popo³udnie
#
# Light Drizzle
# Lekka m¿awka
# Drizzle
# M¿awka
# Light Rain
# Lekki deszcz
# Rain
# Deszcz
# Heavy Rain
# Ulewa
# Light Rain/Fog
# Lekki deszcz/Mg³a
# Rain/Fog
# Deszcz/Mg³a
# Light Drizzle/Windy
# Lekka m¿awka/Wiatr
# Drizzle/Windy
# M¿awka/Wiatr
# Light Rain/Windy
# Lekki deszcz/Wiatr
# Rain/Windy
# Deszcz/Wiatr
# Rain / Wind
# Deszcz/Wiatr
# Heavy Rain/Windy
# Ulewa/Wiatr
# AM Light Rain
# Ranny lekki deszcz
# PM Light Rain
# Popo³udniowy lekki deszcz
# Pm Light Rain
# Popo³udniowy lekki deszcz
# AM Light Rain/Windy
# Ranny lekki deszcz/Wiatr
# PM Light Rain/Windy
# Popo³udniowy lekki deszcz/Wiatr
#
# Rain Shower
# Przelotny deszcz
# Shower
# Przelotna ulewa
# Showers
# Przelotna ulewa
# Heavy Rain Shower
# Mocna ulewa
# Heavy Rain Shower/Windy
# Mocna ulewa/Wiatr
# Light Rain Shower
# Lekka ulewa
# AM Shower
# Poranna ulewa
# AM Showers
# Poranna ulewa
# Am Showers
# Poranna ulewa
# AM Showers / Wind
# Poranna ulewa/Wiatr
# PM Shower
# Popo³udniowa ulewa
# PM Showers / Wind
# Popo³udniowe ulewy/Wiatr
# Few Showers / Wind
# Przelotne deszcze/Wiatr
# Showers / Wind
# Deszcze/Wiatr
# PM Showers
# Popo³udniowe ulewy
# Pm Showers
# Popo³udniowe ulewy
# Scattered Shower
# Rozleg³a ulewa
# Scattered Showers
# Rozleg³e ulewy
# Scatter Showers
# Rozleg³e ulewy
# Rain Shower/Windy
# Przelotny deszcz/Wiatr
# Shower/Windy
# Przelotna ulewa/Wiatr
# Light Rain Shower/Windy
# Lekka ulewa/Wiatr
# AM Shower/Windy
# Poranna ulewa/Wiatr
# PM Shower/Windy
# Popo³udniowa ulewa/Wiatr
# Scattered Shower/Windy
# Rozleg³a ulewa/Wiatr
# Scatter Showers / Wind
# Rozleg³e ulewy/Wiatr
# Few Showers
# Mo¿liwe ulewy
# Few Showers/Windy
# Mo¿liwe ulewy/Wiatr
# Showers in the Vicinity
# Pobliskie ulewy
#
# Light Snow
# Lekki ¶nieg
# Snow
# Šnieg
# Snow / Wind
# Šnieg/Wiatr
# Heavy Snow
# Mocny ¶nieg
# Light Snow Pellets
# Lekki grad ¶nie¿ny
# Snow Pellets
# Grad ¶nie¿ny
# Light Ice Pellets
# Lekki grad lodowy
# Ice Pellets
# Grad lodowy
# Wintery Weather
# Zimowa pogoda
# Light Freezing Rain
# Lekki zamarzaj±y deszcz
# Freezing Rain
# Zamarzaj±cy deszcz
# Flurries/Windy
# Zamiecie/Wiatr
# Light Flurries/Windy
# Lekkie zamiecie/Wiatr
# Light Snow/Windy
# Lekki ¶nieg/Wiatr
# Light Snow / Wind
# Lekki ¶nieg/Wiatr
# Snow/Windy
# Šnieg/Wiatr
# Heavy Snow/Windy
# Mocny ¶nieg/Wiatr
# Light Snow Pellets/Windy
# Lekki grad ¶nie¿ny/Wiatr
# Snow Pellets/Windy
# Grad ¶nie¿ny/Wiatr
# Light Ice Pellets/Windy
# Lekki grad lodowy/Wiatr
# Ice Pellets/Windy
# Grad lodowy/Wiatr
# Light Freezing Rain/Windy
# Lekki zamarzaj±cy deszcz/Wiatr
# Freezing Rain/Windy
# Zamarzaj±cy deszcz/Wiatr
# Wintery Mix
# Miks zimowy
# Light Snow Grains
# Lekkie granulki ¶niegu
# Snow Grains
# Granulki ¶niegu
# Rain/Snow
# Šnieg z deszczem
# Rain / Snow Showers
# Deszcz ze ¶niegiem
# Rain / Snow
# Deszcz ze ¶niegiem
# Rain / Thunder
# Deszcz / Burza
# Rain/Show/Windy
# Šnieg z deszczem/Wiatr
# Rain / Snow / Wind
# Šnieg z deszczem/Wiatr
# Light Rain/Freezing Rain
# Lekki deszcz/Zamarzaj±cy deszcz
# Rain/Freezing Rain
# Deszcz/Zamarzaj±cy deszcz
# Light Rain/Freezing Rain/Windy
# Lekki deszcz/Zamarzaj±cy Deszcz/Wiatr
# Rain/Freezing Rain/Windy
# Deszcz/Zamarzaj±cy deszcz/Wiatr
# AM Snow
# Poranny ¶nieg
# PM Snow
# Popo³udniowy ¶nieg
# AM Light Snow
# Poranny lekki ¶nieg
# PM Light Snow
# Popo³udniowy lekki ¶nieg
# Ice Crystals
# Kryszta³ki lodu
# Ice Crystals/Windy
# Kryszta³ki lodu/Wiatr
#
# Snow Showers
# Burze ¶nie¿ne
# Snow Shower
# Burza ¶nie¿na
# Heavy Snow Shower
# Mocna burza ¶nie¿na
# Heavy Snow Shower/Windy
# Mocna burza ¶nie¿na/Wiatr
# PM Snow Showers
# Popo³udniowe burze ¶nie¿ne
# AM Snow Showers
# Poranne burze ¶nie¿ne
# Rain/Snow Showers
# Deszcz/Burze ¶nie¿ne
# Snow Showers/Windy
# Burze ¶nie¿ne/Wiatr
# PM Snow Showers/Windy
# Popo³udniowe burze ¶nie¿ne/Wiatr
# AM Snow Showers/Windy
# Poranne burze ¶nie¿ne/Wiatr
# Rain/Snow Showers/Windy
# Deszcz/Burze ¶nie¿ne/Wiatr
# Light Snow Showers
# Lekkie burze ¶nie¿ne
# Light Snow Shower
# Lekka burza ¶nie¿na
# Light Snow Showers/Windy
# Lekkie burze ¶nie¿ne/Wiatr
# Flurries
# Zamiecie
# Light Flurries
# Lekkie zamiecie
# Scattered Flurries
# Rozleg³e zamiecie
# Few Flurries
# Mo¿liwe zamiecie
# Few Flurries/Windy
# Mo¿liwe zamiecie/Wiatr
# Scattered Snow Showers
# Rozleg³e burze ¶nie¿ne
# Scattered Snow Showers/Windy
# Rozleg³e burze ¶nie¿ne/Wiatr
# Few Snow Showers
# Mo¿liwe burze ¶nie¿ne
# Few Snow Showers/Windy
# Mo¿liwe burze ¶nie¿ne/Wiatr
# Freezing Drizzle
# Marzn±ca m¿awka
# Light Freezing Drizzle
# Lekka marzn±ca m¿awka
# Freezing Drizzle/Windy
# Marzn±ca m¿awka/Wiatr
# Light Freezing Drizzle/Windy
# Lekka marzn±ca m¿awka/Wiatr
# Drifting Snow
# Zawieja ¶nie¿na
#
# Thunderstorms
# Burze
# T-storms
# Burze
# T-Storms
# Burze
# T-Storm
# Burza
# Scattered Thunderstorms
# Rozleg³e burze
# Scattered T-Storms
# Rozleg³e burze
# Thunderstorms/Windy
# Burze/Wiatr
# Scattered Thunderstorms/Windy
# Rozleg³e burze/Wiatr
# Rain/Thunder
# Deszcz/Grzmoty
# Light Thunderstorms/Rain
# Lekkie burze/Deszcz
# Thunderstorms/Rain
# Burze/Deszcz
# Light Rain with Thunder
# Lekki deszcz z grzmotami
# Rain with Thunder
# Deszcz z grzmotami
# Thunder in the Vicinity
# Pobliskie burze
#
# Fog
# Mg³a
# Haze
# Lekka mg³a
# Mist
# Lekkie zamglenie
# Fog/Windy
# Mg³a/Wiatr
# Haze/Windy
# Lekka Mg³a/Wiatr
# Mist/Windy
# Lekkie zamglenie/Wiatr
# Partial Fog
# Czê¶ciowa mg³a
# Smoke
# Gêsta mg³a
# Foggy
# Mglisto
# AM Fog/PM Sun
# Ranna mg³a/Popo³udniowe s³oñce
# Shallow Fog
# P³ytka mg³a
#
# Blowing Dust
# Zawieja py³owa
# Blowing Sand
# Zawieja piaskowa
# Duststorm
# Burza piaskowa
# Wind
# Wiatr
# Widespread Dust/Windy
# Rozleg³e zamiecie/Wiatr
# Widespread Dust
# Rozleg³e zamiecie
# Low Drifting Sand
# Zawieja piaskowa
#
# Data Not Available
# Dane niedostêpne
# N/A
# N/D
# N/a
# N/d


[MLessa]

É, tô vendo que esse tópico tá meio parado já a algum tempo mas mesmo assim vou tentar.
Bem, o problema é o seguinte: Tenho o conky instalado o .conkyrc configurado e quando eu starto o conky pelo terminal depois do computador completamente iniciado tudo funciona perfeitamente. O problema é que quando eu configuro o conky como aplicativo de sessão ele fica por cima de todas as outras janelas.
Alguém saberia como resolver isso??
 

[Cláudio Novais]

A solução é muito simples, e infelizmente não é a que você desejaria. A solução que toda a gente usa é no comando que você põe a arrancar, deve adicionar o seguinte antes:
sleep 25;
Assim, esse comando espera 25 segundos e só depois é que arranca com o conky. Infelizmente o conky não foi escrito exactamente para Gnome e penso que por causa disso ocorre esta pequena anomalia que pode ser evitada bastando para isso pôr o conky a arrancar mais tarde.

[bred81]

A solução é muito simples, e infelizmente não é a que você desejaria. A solução que toda a gente usa é no comando que você põe a arrancar, deve adicionar o seguinte antes:
sleep 25;
Assim, esse comando espera 25 segundos e só depois é que arranca com o conky. Infelizmente o conky não foi escrito exactamente para Gnome e penso que por causa disso ocorre esta pequena anomalia que pode ser evitada bastando para isso pôr o conky a arrancar mais tarde.

Eu fazia assim:
criava um arquivo chamado inicial, dentro dele botava:

Código: [Selecionar]

#!/bin/bash
sleep 10
conky
Dai ia em Sistema -> Preferências -> Aplicativos de Sessão e botava pra inicializar com o sistema esse arquivo.
Sei que dá pra fazer outra coisa, mas não lembro o comando. Chutaria:

Código: [Selecionar]

`sleep 10 && conky`

[rjbgbo]

Conky preto, versão lucid lynx



Uploaded with ImageShack.us

Código: [Selecionar]

# Use Xft?
use_xft yes
xftfont DejaVu Sans:size=8
xftalpha 0.8
color0 FFFFFF
color1 FCAF3E

text_buffer_size 2048

# Update interval in seconds
update_interval 1

# This is the number of times Conky will update before quitting.
# Set to zero to run forever.
total_run_times 0

# Create own window instead of using desktop (required in nautilus)
own_window yes
own_window_transparent yes
own_window_type override
#own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager

# Use double buffering (reduces flicker, may not work for everyone)
double_buffer yes

# Minimum size of text area
minimum_size 180 0
maximum_width 200

# Draw shades?
draw_shades no

# Draw outlines?
draw_outline no

# Draw borders around text
draw_borders no

# Stippled borders?
stippled_borders 0

# border margins
border_margin 5

# border width
border_width 1

# Default colors and also border colors
default_color black
#default_shade_color black
#default_outline_color white
own_window_colour white

# Text alignment, other possible values are commented
#alignment top_left
alignment top_right
#alignment bottom_left
#alignment bottom_right

# Gap between borders of screen and text
# same thing as passing -x at command line
gap_x 7
gap_y 35

# Subtract file system buffers from used memory?
no_buffers yes

# set to yes if you want all text to be in uppercase
uppercase no

# number of cpu samples to average
# set to 1 to disable averaging
cpu_avg_samples 2

# number of net samples to average
# set to 1 to disable averaging
net_avg_samples 2

# Force UTF8? note that UTF8 support required XFT
override_utf8_locale yes

# Add spaces to keep things from moving about?  This only affects certain objects.
use_spacer none

TEXT
DATA E HORA ${hr 2}
${voffset -12}${goto 28}${font Arial Black:size=46}${color}${time %H}${color}${font}${voffset -36}${font Liberation Sans:style=Bold:size=13}${color}${time :%M}${time :%S}${color}${font}
${voffset -2}${goto 112}${font Liberation Sans:style=Bold:size=12}${color}${time %A}${color}${font}
${goto 112}${time %d %b %Y}

CALENDÁRIO ${hr 2}
${font DejaVu Sans Mono:size=9}${execi 60  cal | awk 'NR>1' | sed -e 's/   /    /g' -e 's/[^ ] /& /g' -e 's/..*/  & /' -e 's/ \('`date | awk '{print $3}'`'\) /\['`date | awk '{print $3}'`'\]/'}

SISTEMA ${hr 2}
${voffset 2}${font OpenLogos:size=16}u${font}   Kernel:  ${alignr}${kernel}
${font StyleBats:size=16}q${font}   Ligado: ${alignr}${uptime}
${font Pie charts for maps:size=16}L${font} Root: ${fs_used /}/${fs_size /} ${alignr}${fs_bar 7,55 /}
${font Pie charts for maps:size=16}L${font} Home: ${fs_used /home}/${fs_size /home} ${alignr}${fs_bar 7,50 /home}

${execi 1000 cat /proc/cpuinfo | grep 'model name' | sed -e 's/model name.*: //'}
${font StyleBats:size=16}A${font}   CPU1: ${cpu cpu1}% ${alignr}${cpubar cpu1 8,60}
${font StyleBats:size=16}A${font}   CPU2: ${cpu cpu2}% ${alignr}${cpubar cpu2 8,60}
${font StyleBats:size=16}g${font}   RAM: $memperc% ${alignr}${membar 8,60}
${font StyleBats:size=16}j${font}   SWAP: $swapperc% ${alignr}${swapbar 8,60}

CONSUMO DE MEMÓRIA:
${top_mem name 1}${alignr}${top_mem mem 1}
${top_mem name 2}${alignr}${top_mem mem 2}
${top_mem name 3}${alignr}${top_mem mem 3}
${top_mem name 4}${alignr}${top_mem mem 4}

REDE ${hr 2}
${if_existing /proc/net/route wlan0}
${voffset -6}${font PizzaDude Bullets:size=14}O${font}   Up: ${upspeed wlan0} kb/s ${alignr}${upspeedgraph wlan0 8,60 F57900 FCAF3E}
${voffset 4}${font PizzaDude Bullets:size=14}U${font}   Down: ${downspeed wlan0} kb/s ${alignr}${downspeedgraph wlan0 8,60 F57900 FCAF3E}
${voffset 4}${font PizzaDude Bullets:size=14}N${font}   Upload: ${alignr}${totalup wlan0}
${voffset 4}${font PizzaDude Bullets:size=14}T${font}   Download: ${alignr}${totaldown wlan0}
${voffset 4}${font PizzaDude Bullets:size=14}Z${font}   Sinal: ${wireless_link_qual wlan0}% ${alignr}${wireless_link_bar 8,60 wlan0}
${voffset 4}${font PizzaDude Bullets:size=14}a${font}   Ip Local: ${alignr}${addr wlan0}
${else}${if_existing /proc/net/route eth0}
${voffset -6}${font PizzaDude Bullets:size=14}O${font}   Up: ${upspeed eth0} kb/s ${alignr}${upspeedgraph eth0 8,60 F57900 FCAF3E}
${voffset 4}${font PizzaDude Bullets:size=14}U${font}   Down: ${downspeed eth0} kb/s ${alignr}${downspeedgraph eth0 8,60 F57900 FCAF3E}
${voffset 4}${font PizzaDude Bullets:size=14}N${font}   Upload: ${alignr}${totalup eth0}
${voffset 4}${font PizzaDude Bullets:size=14}T${font}   Download: ${alignr}${totaldown eth0}
${voffset 4}${font PizzaDude Bullets:size=14}a${font}   Ip Local: ${alignr}${addr eth0}
${endif}${else}${if_existing /proc/net/route eth1}
${voffset -6}${font PizzaDude Bullets:size=14}O${font}   Up: ${upspeed eth1} kb/s ${alignr}${upspeedgraph eth1 8,60 F57900 FCAF3E}
${voffset 4}${font PizzaDude Bullets:size=14}U${font}   Down: ${downspeed eth1} kb/s ${alignr}${downspeedgraph eth1 8,60 F57900 FCAF3E}
${voffset 4}${font PizzaDude Bullets:size=14}N${font}   Upload: ${alignr}${totalup eth1}
${voffset 4}${font PizzaDude Bullets:size=14}T${font}   Download: ${alignr}${totaldown eth1}
${voffset 4}${font PizzaDude Bullets:size=14}a${font}   Ip Local: ${alignr}${addr eth1}
${endif}${else}
${voffset -6}${font PizzaDude Bullets:size=14}O${font}   Up: ${upspeed ppp0} kb/s ${alignr}${upspeedgraph ppp0 8,60 F57900 FCAF3E}
${voffset 4}${font PizzaDude Bullets:size=14}U${font}   Down: ${downspeed ppp0} kb/s ${alignr}${downspeedgraph ppp0 8,60 F57900 FCAF3E}
${voffset 4}${font PizzaDude Bullets:size=14}N${font}   Upload: ${alignr}${totalup ppp0}
${voffset 4}${font PizzaDude Bullets:size=14}T${font}   Download: ${alignr}${totaldown ppp0}
${voffset 4}${font PizzaDude Bullets:size=14}a${font}   Ip Local: ${alignr}${addr ppp0}
${endif}


[Assemblador]

Conky no Ubuntu 10.04



Uploaded with ImageShack.us

Código: [Selecionar]

#FORMATAÇÃO
background yes
font Vibrocentric:size=10
xftfont Vibrocentric:size=10
use_xft yes
xftalpha 0.1
update_interval 1.0
total_run_times 0
own_window yes
own_window_type override
own_window_transparent yes
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager
double_buffer yes
draw_shades yes
draw_outline no
draw_borders no
draw_graph_borders no
minimum_size 206 5
maximum_width 265
default_color FFFFFF
default_shade_color 000000
default_outline_color 000000
alignment top_right
gap_x 10
gap_y 42
no_buffers yes
cpu_avg_samples 2
override_utf8_locale no
uppercase no # set to yes if you want all text to be in uppercase
use_spacer none


TEXT
${color magenta}${font Aerial:style=Bold:pixelsize=12}SISTEMA - Ubuntu 10.04${font Vibrocentric:size=10} ${hr 1 }
# IDENTIFICAÇÃO DO SISTEMA
${color yellow}Hostname: $alignr$nodename
${color yellow}Kernel: $alignr$kernel
${color yellow}CPU: ${alignc}${execi 99999 cat /proc/cpuinfo | grep "model name" -m1 | cut -d":" -f2 | cut -d" " -f2- | sed 's#Processor ##'}
${color yellow}Frequencia Real:   ${alignr}${freq_g 2}GHz 
${color yellow}Ligado: $alignr$uptime
${color yellow}Processos: ${alignr}$processes ($running_processes running)
${color yellow}Carregados: ${alignr}$loadavg

#CPU
${color blue}CPU 1 ${alignc} ${freq_g}GHz / ${freq}MHz${alignr}${color green}(${cpu cpu1}%)
${color red}(${cpubar cpu1}%)
${color blue}CPU 2 ${alignc} ${freq_g}GHz / ${freq}MHz${alignr}${color green}(${cpu cpu2}%)
${color red}${cpubar cpu2}
${cpugraph cccccc 00FF00}
${color cyan}Temperatura do processador: ${color red}${hwmon 0 temp 2} C
${color cyan}Temperatura do sistema: ${color red}${hwmon 0 temp 1} C

#MEMÓRIA
${color yellow}RAM ${alignr}$mem / $memmax ($memperc%)
${color green}${membar 4}
#${font Vibrocentric:pixelsize=49}${alignc}${time %H:%M}${font Vibrocentric:size=10}
${color yellow}SWAP ${alignr}$swap / $swapmax ($swapperc%)
${color green}${swapbar 4}

#CONSUMO DE CPU, MEMÓRIA - PROCESSOS EM USO
${color magenta}Highest CPU $alignr CPU% MEM%
${hr 1}
${color white}${top name 1}$alignr${top cpu 1}${top mem 1}
${color red}${top name 2}$alignr${top cpu 2}${top mem 2}
${color cyan}${top name 3}$alignr${top cpu 3}${top mem 3}
${color blue}${top name 4}$alignr${top cpu 4}${top mem 4}
${color yellow}${top name 5}$alignr${top cpu 5}${top mem 5}
${color green}${top name 6}$alignr${top cpu 6}${top mem 6}

${color magenta}Highest MEM $alignr CPU% MEM%
${hr 1}
${color white}${top_mem name 1}$alignr${top_mem cpu 1}${top_mem mem 1}
${color red}${top_mem name 2}$alignr${top_mem cpu 2}${top_mem mem 2}
${color cyan}${top_mem name 3}$alignr${top_mem cpu 3}${top_mem mem 3}
${color blue}${top_mem name 4}$alignr${top_mem cpu 4}${top_mem mem 4}
${color yellow}${top_mem name 5}$alignr${top_mem cpu 5}${top_mem mem 5}
${color green}${top_mem name 6}$alignr${top_mem cpu 6}${top_mem mem 6}

#ARMAZENAMENTO
${color magenta}${font Aerial:style=Bold:pixelsize=12}SISTEMA DE ARQUIVOS ${font Vibrocentric:size=10}${hr 1}

${color cyan}Raiz - ${fs_free_perc /}% Livre
${color blue}Livre: ${fs_free /} ${color red}$alignr Usado: ${fs_used /}
${color yellow}${fs_bar 4 /}
${color cyan}Tamanho Total: ${fs_size /}

${color cyan}Arquivos - ${fs_free_perc /media/Arquivos}% Livre
${color blue}Livre: ${fs_free /media/Arquivos} ${color red}$alignr Usado: ${fs_used /media/Arquivos}
${color yellow}${fs_bar 4 /media/Arquivos}
${color cyan}Tamanho Total: ${fs_size /media/Arquivos}

${color cyan}Windows - ${fs_free_perc /media/NTFS}% Livre
${color blue}Livre: ${fs_free /media/NTFS} ${color red}$alignr Usado: ${fs_used /media/NTFS}
${color yellow}${fs_bar 4 /media/NTFS}
${color cyan}Tamanho Total: ${fs_size /media/NTFS}

#INTERNET
${color magenta}${font Aerial:style=Bold:pixelsize=12}INTERNET ${font Vibrocentric:size=10}${hr 1}

${color blue}Down ${downspeed eth0} k/s ${alignr}${color red}Up ${upspeed eth0} k/s
${downspeedgraph eth0 25,107 cccccc 00FF00} ${alignr}${upspeedgraph eth0 25,107 cccccc 00FF00}
${color blue}Total ${totaldown eth0} ${alignr}${color red}Total ${totalup eth0}

[vampire_thunder]

Download:
http://www.megaupload.com/?d=KLE8LSN8

[Br1000]

vampire_thunder, boa noite.
Baixei os scripts que você disponibilizou e li o LEIAME postado lá.
Você diz que para que funcione bem tem que usar resolução 1280X800 porem meu monitor com esta definição fica muito ruim, impossível mesmo de se usar. Eu uso aqui 1440X900 que é a que deixa a resolução mais perfeita.
Você diz que haveria necessidade de modificar os arquivos de configuração.
Pergunto quais arquivos deverei modificar para a resolução de meu monitor?
Já percebi que só consigo que meu conky fique com fundo transparente com a resolução que você indicou. Por isso meu interesse em querer saber quais modificações devo fazer para que possa usar o seu tema que tá muito legal.
Outro assunto: percebi que no seu tema não mostra a temperatura da CPU. Tive uma grande batalha para conseguir que o conky mostrasse esta temperatura e só resolvi colocando a linha:
${offset 10}${color slate grey}Core Temp: ${color } ${hwmon 0 temp 1}°C
Veja se com você funciona.
Muito obrigado.

[vampire_thunder]

Olá!
A matriz do conkyrc foi criada no conkywizard (o link está nas referências), que já deixou a resolução ajustada ao meu monitor. No entanto era para estar transparente independente da resolução, pois a imagem está transparente.
Toda edição é feita no arquivo .conkyrc, mas na imagem eu coloquei a transparência usando o Gimp. Usando o conkywizard, a imagem já fica na sua resolução.
A temperatura da CPU foi a mesma coisa. O programa usou os sensores (os mesmos que estão no painel) mas não sei por que o do CPU não funcionou. Pior, o processador que uso é Dual Core, o que teoricamente são 2, enquanto o HD é apenas 1, e a temperatura aparece ao contrário: duas para o HD e uma para a CPU.


Com alguns ajustes, coloquei o seu código. Valeu!
Só não sei por que as temperaturas do Conky não batem com a do painel.

[Br1000]

vampire_thunder, Olá.
Tentei por todos os meios fazer funcionar o conkywizard mas nada funcionou.

Quando estando na pasta /etc/conky e tento executar o ConkywWzard_32bits_V1.0_Beta1 dando dois cliques nele nada acontece. Se tento executar via linha de comando recebo o erro:

/bin/bash: line 1: 25025 Segmentation fault      './ConkyWizard_32bits_V1.0_Beta1'

Já tentei como root e também nada de funcionar.
Por favor tens alguma idéia do que posso tentar fazer para que funcione?

Nota: Já tentei baixar novamente, descompactar, dar autorização tudo de novo mas não adiantou nada.

Obrigado pela atenção.

[vampire_thunder]

Como assim /etc/conky?
Aqui eu executo ele da pasta onde fiz download e funciona normalmente.
Uma observação: o meu Lucid é 64 bits, mas o conkywizard 64 não funcionou. Só o 32 que funcionou normal.