Autor Tópico: Placa de Video VIA S3 unichrome IGP  (Lida 13045 vezes)

isaacguerra

  • Visitante
Placa de Video VIA S3 unichrome IGP
« Online: 05 de Maio de 2006, 22:45 »
Pessoal tenho um Laptop, usando Ubuntu Drapper, com uma Placa de Video VIA S3 unichrome IGP, e nao esta funcionando!!
Alguem ja Instalou essa placa!!!

Offline Spy_BR

  • Usuário Ubuntu
  • *
  • Mensagens: 12
    • Ver perfil
Re: Placa de Video VIA S3 unichrome IGP
« Resposta #1 Online: 09 de Novembro de 2006, 09:47 »
O driver esta disponivel no site da via, mas eu estou utilizando o padrão vesa com a configuração 1280x800 esta perfeito!

Abraços
You call this reality? 
Let me show you another one - Reality 2.0, if you will. Cleaner. Safer, more democratic and wide open for creative expansion.
Which would you prefer?

Offline kblo

  • Usuário Ubuntu
  • *
  • Mensagens: 13
    • Ver perfil
Re: Placa de Video VIA S3 unichrome IGP
« Resposta #2 Online: 24 de Abril de 2007, 20:27 »
comprei um notebook w7630 da itautec e a resolução do video está pessima segue o xorg.conf:
Section "Monitor"
   Identifier   "Generic Monitor"
   Option      "DPMS"
EndSection

Section "Screen"
   Identifier   "Default Screen"
   Device      "Generic Video Card"
   Monitor      "Generic Monitor"
   DefaultDepth   24
   SubSection "Display"
      Depth      1
      Modes      "1024x768" "800x600" "720x400" "640x480"
   EndSubSection
   SubSection "Display"
      Depth      4
      Modes      "1024x768" "800x600" "720x400" "640x480"
   EndSubSection
   SubSection "Display"
      Depth      8
      Modes      "1024x768" "800x600" "720x400" "640x480"
   EndSubSection
   SubSection "Display"
      Depth      15
      Modes      "1024x768" "800x600" "720x400" "640x480"
   EndSubSection
   SubSection "Display"
      Depth      16
      Modes      "1024x768" "800x600" "720x400" "640x480"
   EndSubSection
   SubSection "Display"
      Depth      24
      Modes      "1024x768" "800x600" "720x400" "640x480"
   EndSubSection
EndSection
Alguem pode me ajudar?
Como faço para saber que placa de video e que video eu tenho?
Um abraço.

Offline chlferreira

  • Usuário Ubuntu
  • *
  • Mensagens: 69
    • Ver perfil
    • Carnivoro Sem Dentes
Re: Placa de Video VIA S3 unichrome IGP
« Resposta #3 Online: 25 de Abril de 2007, 21:39 »
Cara quais dos drivers da pagina da VIA devo instalar ? E depois que eu souber qual drive baixar, qual o procedimento para instalo?
Obrigado pela atenção.

Carlos

Offline alexmatos

  • Usuário Ubuntu
  • *
  • Mensagens: 792
  • Arch Linux / Ubuntu 7.04
    • Ver perfil
Re: Placa de Video VIA S3 unichrome IGP
« Resposta #4 Online: 25 de Abril de 2007, 21:49 »
Antes de eu arranjar uma placa de vídeo, eu usava a minha onboard da VIA também no Dapper. Eu não tive que instalar nada, ele instalou sozinho!

Offline chlferreira

  • Usuário Ubuntu
  • *
  • Mensagens: 69
    • Ver perfil
    • Carnivoro Sem Dentes
Re: Placa de Video VIA S3 unichrome IGP
« Resposta #5 Online: 01 de Maio de 2007, 11:48 »
comprei um notebook w7630 da itautec e a resolução do video está pessima segue o xorg.conf:
Section "Monitor"
   Identifier   "Generic Monitor"
   Option      "DPMS"
EndSection

Section "Screen"
   Identifier   "Default Screen"
   Device      "Generic Video Card"
   Monitor      "Generic Monitor"
   DefaultDepth   24
   SubSection "Display"
      Depth      1
      Modes      "1024x768" "800x600" "720x400" "640x480"
   EndSubSection
   SubSection "Display"
      Depth      4
      Modes      "1024x768" "800x600" "720x400" "640x480"
   EndSubSection
   SubSection "Display"
      Depth      8
      Modes      "1024x768" "800x600" "720x400" "640x480"
   EndSubSection
   SubSection "Display"
      Depth      15
      Modes      "1024x768" "800x600" "720x400" "640x480"
   EndSubSection
   SubSection "Display"
      Depth      16
      Modes      "1024x768" "800x600" "720x400" "640x480"
   EndSubSection
   SubSection "Display"
      Depth      24
      Modes      "1024x768" "800x600" "720x400" "640x480"
   EndSubSection
EndSection
Alguem pode me ajudar?
Como faço para saber que placa de video e que video eu tenho?
Um abraço.


Tenho um notebook deste tambem com o Ubuntu 7.04, e apesar de não conseguir fazer funcionar o Berry nele a imagem esta ótima, segue abaixo meu xorg.conf. Estou usando VESA, a VIA sempre que uso da pau e o X não entra.


# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
   FontPath   "/usr/share/fonts/X11/misc"
   FontPath   "/usr/share/fonts/X11/cyrillic"
   FontPath   "/usr/share/fonts/X11/100dpi/:unscaled"
   FontPath   "/usr/share/fonts/X11/75dpi/:unscaled"
   FontPath   "/usr/share/fonts/X11/Type1"
   FontPath   "/usr/share/fonts/X11/100dpi"
   FontPath   "/usr/share/fonts/X11/75dpi"
   # path to defoma fonts
   FontPath   "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
   Load   "i2c"
   Load   "bitmap"
   Load   "ddc"
   Load   "dri"
   Load   "extmod"
   Load   "freetype"
   Load   "glx"
   Load   "int10"
   Load   "vbe"
EndSection

Section "InputDevice"
   Identifier   "Generic Keyboard"
   Driver      "kbd"
   Option      "CoreKeyboard"
   Option      "XkbRules"   "xorg"
   Option      "XkbModel"   "pc105"
   Option      "XkbLayout"   "us"
   Option      "XkbOptions"   "lv3:ralt_switch"
EndSection

Section "InputDevice"
   Identifier   "Configured Mouse"
   Driver      "mouse"
   Option      "CorePointer"
   Option      "Device"      "/dev/input/mice"
   Option      "Protocol"      "ImPS/2"
   Option      "ZAxisMapping"      "4 5"
   Option      "Emulate3Buttons"   "true"
EndSection

Section "InputDevice"
   Identifier   "Synaptics Touchpad"
   Driver      "synaptics"
   Option      "SendCoreEvents"   "true"
   Option      "Device"      "/dev/psaux"
   Option      "Protocol"      "auto-dev"
   Option      "HorizScrollDelta"   "0"
EndSection

Section "InputDevice"
   Driver      "wacom"
   Identifier   "stylus"
   Option      "Device"   "/dev/wacom"   # Change to
                     # /dev/input/event
                     # for USB
   Option      "Type"      "stylus"
   Option      "ForceDevice"   "ISDV4"      # Tablet PC ONLY
EndSection

Section "InputDevice"
   Driver      "wacom"
   Identifier   "eraser"
   Option      "Device"   "/dev/wacom"   # Change to
                     # /dev/input/event
                     # for USB
   Option      "Type"      "eraser"
   Option      "ForceDevice"   "ISDV4"      # Tablet PC ONLY
EndSection

Section "InputDevice"
   Driver      "wacom"
   Identifier   "cursor"
   Option      "Device"   "/dev/wacom"   # Change to
                     # /dev/input/event
                     # for USB
   Option      "Type"      "cursor"
   Option      "ForceDevice"   "ISDV4"      # Tablet PC ONLY
EndSection

Section "Device"
   Identifier   "Placa de Vídeo Genérica"
   Driver      "vesa"
   BusID      "PCI:1:0:0"
EndSection

Section "Monitor"
   Identifier   "Monitor Genérico"
   Option      "DPMS"
   HorizSync   28-64
   VertRefresh   43-60
EndSection

Section "Screen"
   Identifier   "Default Screen"
   Device      "Placa de Vídeo Genérica"
   Monitor      "Monitor Genérico"
   DefaultDepth   24
   SubSection "Display"
      Depth      1
      Modes      "1280x800"
   EndSubSection
   SubSection "Display"
      Depth      4
      Modes      "1280x800"
   EndSubSection
   SubSection "Display"
      Depth      8
      Modes      "1280x800"
   EndSubSection
   SubSection "Display"
      Depth      15
      Modes      "1280x800"
   EndSubSection
   SubSection "Display"
      Depth      16
      Modes      "1280x800"
   EndSubSection
   SubSection "Display"
      Depth      24
      Modes      "1280x800"
   EndSubSection
EndSection

Section "ServerLayout"
   Identifier   "Default Layout"
   Screen      "Default Screen"
   InputDevice   "Generic Keyboard"
   InputDevice   "Configured Mouse"
   InputDevice     "stylus"   "SendCoreEvents"
   InputDevice     "cursor"   "SendCoreEvents"
   InputDevice     "eraser"   "SendCoreEvents"
   InputDevice   "Synaptics Touchpad"
EndSection

Section "DRI"
   Mode   0666
EndSection

Offline chlferreira

  • Usuário Ubuntu
  • *
  • Mensagens: 69
    • Ver perfil
    • Carnivoro Sem Dentes
Re: Placa de Video VIA S3 unichrome IGP
« Resposta #6 Online: 02 de Maio de 2007, 21:07 »
Pessoal,
tenho esta mesma placa, para poder fazer funcionar ela com o driver da VIA usei as dicas dos seguintes links https://help.ubuntu.com/community/OpenChrome e http://ubuntuforums.org/showthread.php?t=419094. Pois só estava conseguindo usar o driver da VESA.
Se seguirem todos os passos vai dar certo.

[]s

Carlos Ferreira

joaomelo

  • Visitante
Re: Placa de Video VIA S3 unichrome IGP
« Resposta #7 Online: 08 de Maio de 2007, 09:27 »
Carlos Ferreira,

Segui os passos indicados por você no primeiro "link" e, ao chegar no comando ./autogen.sh --prefix=/usr, o sistema retorna uma mensagem de que o comando não existe (command not found).
Tinha instalado no meu Note Itautec W7630 o SLED10 e a configuração estava muito boa, com a resolução de 1440x900, a 77Mhz, driver VESA.
Agora, com o UBUNTU 7.04, só consegui a resolução 1280x800, a 60Mhz, copiando o seu "xorg.conf".
Você teria algum histórico de como conseguiu instalar e configurar o driver da sua placa?
Grato

*Editado: Não segui um passo, onde é orientado a instalar alguns pacotes para compilação. Como não estou em casa, mais tarde retorno o que aconteceu.
Abaços

CONSEGUI!
Só que a resolução que ficou perfeita foi a de 1440x900, pois o meu Note é "widescreen". E eu apenas acrescentei a resolução ao arquivo /etc/X11/xorg.conf, como segue:

----------------------------------------------------
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
   FontPath   "/usr/share/fonts/X11/misc"
   FontPath   "/usr/share/fonts/X11/cyrillic"
   FontPath   "/usr/share/fonts/X11/100dpi/:unscaled"
   FontPath   "/usr/share/fonts/X11/75dpi/:unscaled"
   FontPath   "/usr/share/fonts/X11/Type1"
   FontPath   "/usr/share/fonts/X11/100dpi"
   FontPath   "/usr/share/fonts/X11/75dpi"
   # path to defoma fonts
   FontPath   "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
   Load   "i2c"
   Load   "bitmap"
   Load   "ddc"
   Load   "dri"
   Load   "extmod"
   Load   "freetype"
   Load   "glx"
   Load   "int10"
   Load   "vbe"
EndSection

Section "InputDevice"
   Identifier   "Generic Keyboard"
   Driver      "kbd"
   Option      "CoreKeyboard"
   Option      "XkbRules"   "xorg"
   Option      "XkbModel"   "abnt2"
   Option      "XkbLayout"   "br"
EndSection

Section "InputDevice"
   Identifier   "Configured Mouse"
   Driver      "mouse"
   Option      "CorePointer"
   Option      "Device"      "/dev/input/mice"
   Option      "Protocol"      "ImPS/2"
   Option      "ZAxisMapping"      "4 5"
   Option      "Emulate3Buttons"   "true"
EndSection

Section "InputDevice"
   Identifier   "Synaptics Touchpad"
   Driver      "synaptics"
   Option      "SendCoreEvents"   "true"
   Option      "Device"      "/dev/psaux"
   Option      "Protocol"      "auto-dev"
   Option      "HorizScrollDelta"   "0"
EndSection

Section "InputDevice"
   Driver      "wacom"
   Identifier   "stylus"
   Option      "Device"   "/dev/wacom"   # Change to
                     # /dev/input/event
                     # for USB
   Option      "Type"      "stylus"
   Option      "ForceDevice"   "ISDV4"      # Tablet PC ONLY
EndSection

Section "InputDevice"
   Driver      "wacom"
   Identifier   "eraser"
   Option      "Device"   "/dev/wacom"   # Change to
                     # /dev/input/event
                     # for USB
   Option      "Type"      "eraser"
   Option      "ForceDevice"   "ISDV4"      # Tablet PC ONLY
EndSection

Section "InputDevice"
   Driver      "wacom"
   Identifier   "cursor"
   Option      "Device"   "/dev/wacom"   # Change to
                     # /dev/input/event
                     # for USB
   Option      "Type"      "cursor"
   Option      "ForceDevice"   "ISDV4"      # Tablet PC ONLY
EndSection

Section "Device"
   Identifier   "Placa de Vídeo Genérica"
   Driver      "via"
   BusID      "PCI:1:0:0"
EndSection

Section "Monitor"
   Identifier   "Monitor Genérico"
   Option      "DPMS"
   HorizSync   28-64
   VertRefresh   43-60
EndSection

Section "Screen"
   Identifier   "Default Screen"
   Device      "Placa de Vídeo Genérica"
   Monitor      "Monitor Genérico"
   DefaultDepth   24
   SubSection "Display"
      Depth      1
      Modes      "1440x900"   "1280x800"
   EndSubSection
   SubSection "Display"
      Depth      4
      Modes      "1440x900"   "1280x800" 
   EndSubSection
   SubSection "Display"
      Depth      8
      Modes      "1440x900"   "1280x800"
   EndSubSection
   SubSection "Display"
      Depth      15
      Modes      "1440x900"   "1280x800"
   EndSubSection
   SubSection "Display"
      Depth      16
      Modes      "1440x900"   "1280x800"
   EndSubSection
   SubSection "Display"
      Depth      24
      Modes      "1440x900"   "1280x800"   
   EndSubSection
EndSection

Section "ServerLayout"
   Identifier   "Default Layout"
   Screen      "Default Screen"
   InputDevice   "Generic Keyboard"
   InputDevice   "Configured Mouse"
   InputDevice     "stylus"   "SendCoreEvents"
   InputDevice     "cursor"   "SendCoreEvents"
   InputDevice     "eraser"   "SendCoreEvents"
   InputDevice   "Synaptics Touchpad"
EndSection
--------------------------------------------------

Agora vou tentar habilitar o 3D para usar o Beryl.
« Última modificação: 08 de Maio de 2007, 20:21 por joaomelo »

joaomelo

  • Visitante
Re: Placa de Video VIA S3 unichrome IGP
« Resposta #8 Online: 09 de Maio de 2007, 10:43 »
Pessoal,

Não consegui rodar os efeitos da área de trabalho, que seria o Beryl.
Mas sei que o 3D está habilitado, pois quando dou o comando abaixo:
Código: [Selecionar]
glxinfo | grep render
O sistema retorna: "direct rendering: Yes"

Acho que é porque a placa de vídeo só tem 64 MB de memóira. Seria por isso?
Alguém conseguiu habilitar os efeitos com esta placa?


Offline chlferreira

  • Usuário Ubuntu
  • *
  • Mensagens: 69
    • Ver perfil
    • Carnivoro Sem Dentes
Re: Placa de Video VIA S3 unichrome IGP
« Resposta #9 Online: 09 de Maio de 2007, 20:32 »
Estou com o mesmo problema, pelo que eu li por ai realmente esta placa não consegue rodar o Beryl.
[]s
Carlos Ferreira

Offline kblo

  • Usuário Ubuntu
  • *
  • Mensagens: 13
    • Ver perfil
Re: Placa de Video VIA S3 unichrome IGP
« Resposta #10 Online: 13 de Maio de 2007, 07:56 »
Pessoal tenho um w7630 itautec e estava com problema na resolução do video, depois de tentar algumas dicas que peguei aqui no forum e incluir algumas linhas no meu org.conf e testar no final ele ficou assim:
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
   FontPath   "/usr/share/fonts/X11/misc"
   FontPath   "/usr/share/fonts/X11/cyrillic"
   FontPath   "/usr/share/fonts/X11/100dpi/:unscaled"
   FontPath   "/usr/share/fonts/X11/75dpi/:unscaled"
   FontPath   "/usr/share/fonts/X11/Type1"
   FontPath   "/usr/share/fonts/X11/100dpi"
   FontPath   "/usr/share/fonts/X11/75dpi"
   # path to defoma fonts
   FontPath   "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
   Load   "i2c"
   Load   "bitmap"
   Load   "ddc"
   Load   "dri"
   Load   "extmod"
   Load   "freetype"
   Load   "glx"
   Load   "int10"
   Load   "vbe"
EndSection

Section "InputDevice"
   Identifier   "Generic Keyboard"
   Driver      "kbd"
   Option      "CoreKeyboard"
   Option      "XkbRules"   "xorg"
   Option      "XkbModel"   "abnt2"
   Option      "XkbLayout"   "br"
EndSection

Section "InputDevice"
   Identifier   "Configured Mouse"
   Driver      "mouse"
   Option      "CorePointer"
   Option      "Device"      "/dev/input/mice"
   Option      "Protocol"      "ImPS/2"
   Option      "ZAxisMapping"      "4 5"
   Option      "Emulate3Buttons"   "true"
EndSection

Section "InputDevice"
   Identifier   "Synaptics Touchpad"
   Driver      "synaptics"
   Option      "SendCoreEvents"   "true"
   Option      "Device"      "/dev/psaux"
   Option      "Protocol"      "auto-dev"
   Option      "HorizScrollDelta"   "0"
EndSection

Section "InputDevice"
   Driver      "wacom"
   Identifier   "stylus"
   Option      "Device"   "/dev/input/wacom"
   Option      "Type"      "stylus"
   Option      "ForceDevice"   "ISDV4"      # Tablet PC ONLY
EndSection

Section "InputDevice"
   Driver      "wacom"
   Identifier   "eraser"
   Option      "Device"   "/dev/input/wacom"
   Option      "Type"      "eraser"
   Option      "ForceDevice"   "ISDV4"      # Tablet PC ONLY
EndSection

Section "InputDevice"
   Driver      "wacom"
   Identifier   "cursor"
   Option      "Device"   "/dev/input/wacom"
   Option      "Type"      "cursor"
   Option      "ForceDevice"   "ISDV4"      # Tablet PC ONLY
EndSection

Section "Device"
   Identifier   "Placa de Vídeo Genérica"
   Driver      "vesa"
   BusID      "PCI:1:0:0"
EndSection

Section "Monitor"
   Identifier   "Monitor Genérico"
   Option      "DPMS"
   HorizSync   28-64
   VertRefresh   43-60
EndSection

Section "Screen"
   Identifier   "Default Screen"
   Device      "Placa de Vídeo Genérica"
   Monitor      "Monitor Genérico"
   DefaultDepth   24
   SubSection "Display"
      Depth      1
      Modes      "1440x900" "1024x768" "800x600" "(pitch" "800)"
   EndSubSection
   SubSection "Display"
      Depth      4
      Modes      "1440x900" "1024x768" "800x600" "(pitch" "800)"
   EndSubSection
   SubSection "Display"
      Depth      8
      Modes      "1440x900" "1024x768" "800x600" "(pitch" "800)"
   EndSubSection
   SubSection "Display"
      Depth      15
      Modes      "1440x900" "1024x768" "800x600" "(pitch" "800)"
   EndSubSection
   SubSection "Display"
      Depth      16
      Modes      "1440x900" "1024x768" "800x600" "(pitch" "800)"
   EndSubSection
   SubSection "Display"
      Depth      24
      Modes      "1440x900" "1024x768" "800x600" "(pitch" "800)"
   EndSubSection
EndSection

Section "ServerLayout"
   Identifier   "Default Layout"
   Screen      "Default Screen"
   InputDevice   "Generic Keyboard"
   InputDevice   "Configured Mouse"
   InputDevice     "stylus"   "SendCoreEvents"
   InputDevice     "cursor"   "SendCoreEvents"
   InputDevice     "eraser"   "SendCoreEvents"
   InputDevice   "Synaptics Touchpad"
EndSection

Section "DRI"
   Mode   0666
EndSection

Offline victormota

  • Usuário Ubuntu
  • *
  • Mensagens: 4
    • Ver perfil
Re: Placa de Video VIA S3 unichrome IGP
« Resposta #11 Online: 08 de Junho de 2007, 03:27 »
Como é que altera esse arquivo XORG.CONF, o meu ta com a permissão negada

Offline jomafras

  • Usuário Ubuntu
  • *
  • Mensagens: 2.009
  • 17.04 Zesty Zapus
    • Ver perfil
Re: Placa de Video VIA S3 unichrome IGP
« Resposta #12 Online: 08 de Junho de 2007, 09:17 »
Pessoal,

Não consegui rodar os efeitos da área de trabalho, que seria o Beryl.
Mas sei que o 3D está habilitado, pois quando dou o comando abaixo:
Código: [Selecionar]
glxinfo | grep render
O sistema retorna: "direct rendering: Yes"

Acho que é porque a placa de vídeo só tem 64 MB de memóira. Seria por isso?
Alguém conseguiu habilitar os efeitos com esta placa?

Já virei e revirei dicas e mais dicas...alterei n vezes o xorg.conf... não funciona nem a pau.
Ainda não tive o gostinho de ver os efeitos... nem  Beryl nem  Compiz.
Vou apelar pra uma Nvidia...é o jeito né?

O Ubuntu sem dúvida é a melhor Distro.
Pesquise primeiro... só depois abra um tópico.
Canal do YouTube - Blog