Nao toca mais de um som ao msmo tempo (ALSA CS4281)

[Strokes]

Galera to com o seguinte probleminha, como escuto musica 24/7 o pc ta sempre tocando algo, entao qndo vai tocar otru evento sonoro ou coisa parecida, ele n toca, so fika a musika, e no esquema de som lah, diz q o dispositivo ta sendo usado e bla bla bla qndo tento executar o teste escutando musica.
outra coisa que notei foi o o volume do linux eh milhoes de vezes maior q a do windows, ou eu que estou louco?!
abraço vlw

[Mythus]

Não está ficando louco não! Essa é uma possibilidade muito comum!

Você está usando Alsa ou OSS? É bem possível que esteja usando esse último ou que o driver da sua placa ainda está em desenvolvimento e ainda não suporta múltiplas streams de audio.

Se estiver usando OSS, abra o gnome-sound-properties e mude para Alsa.

[Strokes]

errr, tava usando o OSS mas com o ALSA, ele ta o seguinte erro "audiotestsrc wave since=512 ! audioconvert ! audiosample ! gconfaudiosink profile=music: recurso ocupado ou não disponivel"

[Mythus]

Pelo que você me mostrou o seu Alsa não está funcionando perfeitamente, só o OSS. Isso explica a limitação de tocar um som por vez.

Primeiro vamos ver se você tem uma placa de som compatível com o Alsa. O OSS um sistema de som que provê mais ou menos um "driver genérico". Vamos saber se o seu chipset é compatível e se você tem os drivers do Alsa instalados.

Você também pode se adiantar indo nesse link, substituindo o nome do chipset pelo seu.

É bom também colar aqui a saída do dmesg e do lspci -v, naquilo que for relevante à sua placa de som (se você tiver dúvida, pode colocar tudo que eu cato. Assim que iniciar o computador, digite no terminal:

Código: [Selecionar]

echo "### INICIO DO DMESG ###" > ~/inicio.log ; dmesg >> ~/inicio.log ; echo "### INICIO DO LSPCI ###" >> ~/inicio.log ; lspci -v >> ~/inicio.log ; gedit ~/inicio.log
Coloquei todos os comandos numa linha só pra facilitar o ctrl+c/ctrl+v
Só pra enteder o que você está fazendo: cada comando é separado por um ";" e todas as saídas estão sendo direcionadas ">" para o mesmo arquivo, uma abaixo da outra ">>", e finalmente você abre o arquivo no gedit para facilitar a cópia dos dados aqui no tópico.

[Strokes]

Ok, aqui vamos nos

### INICIO DO DMESG ###
[    0.000000] Linux version 2.6.20-16-generic (root@terranova) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Thu Jun 7 20:19:32 UTC 2007 (Ubuntu 2.6.20-16.29-generic)
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] sanitize start
[    0.000000] sanitize end
[    0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1
[    0.000000] copy_e820_map() type is E820_RAM
[    0.000000] copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2
[    0.000000] copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end: 0000000000100000 type: 2
[    0.000000] copy_e820_map() start: 0000000000100000 size: 0000000017efd000 end: 0000000017ffd000 type: 1
[    0.000000] copy_e820_map() type is E820_RAM
[    0.000000] copy_e820_map() start: 0000000017ffd000 size: 0000000000002000 end: 0000000017fff000 type: 3
[    0.000000] copy_e820_map() start: 0000000017fff000 size: 0000000000001000 end: 0000000018000000 type: 4
[    0.000000] copy_e820_map() start: 00000000ffff0000 size: 0000000000010000 end: 0000000100000000 type: 2
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 0000000017ffd000 (usable)
[    0.000000]  BIOS-e820: 0000000017ffd000 - 0000000017fff000 (ACPI data)
[    0.000000]  BIOS-e820: 0000000017fff000 - 0000000018000000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[    0.000000] 0MB HIGHMEM available.
[    0.000000] 383MB LOWMEM available.
[    0.000000] Entering add_active_range(0, 0, 98301) 0 entries of 256 used
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   Normal       4096 ->    98301
[    0.000000]   HighMem     98301 ->    98301
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0:        0 ->    98301
[    0.000000] On node 0 totalpages: 98301
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 4064 pages, LIFO batch:0
[    0.000000]   Normal zone: 735 pages used for memmap
[    0.000000]   Normal zone: 93470 pages, LIFO batch:31
[    0.000000]   HighMem zone: 0 pages used for memmap
[    0.000000] DMI 2.3 present.
[    0.000000] ACPI: RSDP (v000 ASUS                                  ) @ 0x000f55e0
[    0.000000] ACPI: RSDT (v001 ASUS   P3V133   0x30303031 MSFT 0x31313031) @ 0x17ffd000
[    0.000000] ACPI: FADT (v001 ASUS   P3V133   0x30303031 MSFT 0x31313031) @ 0x17ffd080
[    0.000000] ACPI: BOOT (v001 ASUS   P3V133   0x30303031 MSFT 0x31313031) @ 0x17ffd040
[    0.000000] ACPI: DSDT (v001   ASUS P3V133   0x00001000 MSFT 0x0100000b) @ 0x00000000
[    0.000000] ACPI: PM-Timer IO Port: 0xe408
[    0.000000] Allocating PCI resources starting at 20000000 (gap: 18000000:e7ff0000)
[    0.000000] Detected 551.279 MHz processor.
[   21.599500] Built 1 zonelists.  Total pages: 97534
[   21.599517] Kernel command line: root=UUID=9cce8294-acad-4cea-aa96-bb0058b50615 ro quiet splash locale=pt_BR
[   21.600280] Local APIC disabled by BIOS -- you can enable it with "lapic"
[   21.600305] mapped APIC to ffffd000 (0130a000)
[   21.600321] Enabling fast FPU save and restore... done.
[   21.600331] Enabling unmasked SIMD FPU exception support... done.
[   21.600360] Initializing CPU#0
[   21.600533] PID hash table entries: 2048 (order: 11, 8192 bytes)
[   21.602570] Console: colour VGA+ 80x25
[   21.603312] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[   21.605148] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[   21.664064] Memory: 378680k/393204k available (1992k kernel code, 13948k reserved, 900k data, 328k init, 0k highmem)
[   21.664104] virtual kernel memory layout:
[   21.664109]     fixmap  : 0xfff4e000 - 0xfffff000   ( 708 kB)
[   21.664115]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[   21.664120]     vmalloc : 0xd8800000 - 0xff7fe000   ( 623 MB)
[   21.664125]     lowmem  : 0xc0000000 - 0xd7ffd000   ( 383 MB)
[   21.664130]       .init : 0xc03d9000 - 0xc042b000   ( 328 kB)
[   21.664135]       .data : 0xc02f2374 - 0xc03d36d4   ( 900 kB)
[   21.664141]       .text : 0xc0100000 - 0xc02f2374   (1992 kB)
[   21.664153] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[   21.740499] Calibrating delay using timer specific routine.. 1103.98 BogoMIPS (lpj=2207972)
[   21.740641] Security Framework v1.0.0 initialized
[   21.740666] SELinux:  Disabled at boot.
[   21.740726] Mount-cache hash table entries: 512
[   21.741347] CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
[   21.741385] CPU: L1 I cache: 16K, L1 D cache: 16K
[   21.741395] CPU: L2 cache: 256K
[   21.741406] CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 00000000 00000000
[   21.741437] Compat vDSO mapped to ffffe000.
[   21.741458] Remapping vsyscall page to ffffe000
[   21.741489] Checking 'hlt' instruction... OK.
[   21.756788] SMP alternatives: switching to UP code
[   21.757542] Freeing SMP alternatives: 11k freed
[   21.758210] Early unpacking initramfs... done
[   22.929392] ACPI: Core revision 20060707
[   22.930926] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
[   22.933958] ACPI: setting ELCR to 0200 (from 0c60)
[   22.934239] CPU0: Intel Pentium III (Coppermine) stepping 03
[   22.934260] SMP motherboard not detected.
[   22.934269] Local APIC not detected. Using dummy APIC emulation.
[   22.934435] Brought up 1 CPUs
[   22.935372] Booting paravirtualized kernel on bare hardware
[   22.935577] Time: 21:00:14  Date: 05/22/107
[   22.935696] NET: Registered protocol family 16
[   22.936064] EISA bus registered
[   22.936083] ACPI: bus type pci registered
[   22.937927] PCI: PCI BIOS revision 2.10 entry at 0xf06b0, last bus=1
[   22.937937] PCI: Using configuration type 1
[   22.937944] Setting up standard PCI resources
[   22.954158] ACPI: Interpreter enabled
[   22.954173] ACPI: Using PIC for interrupt routing
[   22.956685] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[   22.957430] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[   22.958150] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[   22.958869] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 *6 7 9 10 11 12 14 15)
[   22.959477] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   22.959501] PCI: Probing PCI hardware (bus 00)
[   22.960159] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
[   22.961720] Boot video device is 0000:01:00.0
[   22.961808] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   22.977086] Linux Plug and Play Support v0.97 (c) Adam Belay
[   22.977132] pnp: PnP ACPI init
[   22.989935] pnp: PnP ACPI: found 13 devices
[   22.989958] PnPBIOS: Disabled by ACPI PNP
[   22.990185] PCI: Using ACPI for IRQ routing
[   22.990198] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   22.992844] NET: Registered protocol family 8
[   22.992852] NET: Registered protocol family 20
[   22.993733] pnp: 00:03: ioport range 0xe400-0xe47f could not be reserved
[   22.993747] pnp: 00:03: ioport range 0xe800-0xe80f has been reserved
[   22.993758] pnp: 00:03: ioport range 0x290-0x297 has been reserved
[   22.994784] PCI: Bridge: 0000:00:01.0
[   22.994793]   IO window: disabled.
[   22.994806]   MEM window: d6000000-d7efffff
[   22.994817]   PREFETCH window: d7f00000-e3ffffff
[   22.994852] PCI: Setting latency timer of device 0000:00:01.0 to 64
[   22.994947] NET: Registered protocol family 2
[   23.028390] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[   23.028684] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[   23.029315] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[   23.029730] TCP: Hash tables configured (established 16384 bind 8192)
[   23.029742] TCP reno registered
[   23.040767] checking if image is initramfs... it is
[   25.237029] Freeing initrd memory: 6772k freed
[   25.237965] Simple Boot Flag at 0x3a set to 0x1
[   25.238675] audit: initializing netlink socket (disabled)
[   25.238731] audit(1182546016.820:1): initialized
[   25.239417] VFS: Disk quotas dquot_6.5.1
[   25.239502] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   25.239763] io scheduler noop registered
[   25.239775] io scheduler anticipatory registered
[   25.239784] io scheduler deadline registered
[   25.239821] io scheduler cfq registered (default)
[   25.239860] Activating ISA DMA hang workarounds.
[   25.240672] isapnp: Scanning for PnP cards...
[   25.595308] isapnp: No Plug & Play device found
[   25.706930] Real Time Clock Driver v1.12ac
[   25.707086] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[   25.707361] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   25.708054] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[   25.709959] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   25.710678] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[   25.711586] mice: PS/2 mouse device common for all mice
[   25.713669] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[   25.714568] input: Macintosh mouse button emulation as /class/input/input0
[   25.714697] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[   25.714713] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[   25.715278] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[   25.718581] serio: i8042 KBD port at 0x60,0x64 irq 1
[   25.718605] serio: i8042 AUX port at 0x60,0x64 irq 12
[   25.719083] EISA: Probing bus 0 at eisa.0
[   25.719154] EISA: Detected 0 cards.
[   25.749458] TCP cubic registered
[   25.749487] NET: Registered protocol family 1
[   25.749565] Using IPI No-Shortcut mode
[   25.749761] ACPI: (supports S0 S1 S4 S5)
[   25.749910]   Magic number: 11:841:45
[   25.749925]   hash matches device ttyee
[   25.750972] Freeing unused kernel memory: 328k freed
[   25.751473] Time: tsc clocksource has been installed.
[   27.520577] Capability LSM initialized
[   27.667632] ACPI: CPU0 (power states: C1[C1] C2[C2])
[   29.498861] VP_IDE: IDE controller at PCI slot 0000:00:04.1
[   29.498912] VP_IDE: chipset revision 16
[   29.498920] VP_IDE: not 100% native mode: will probe irqs later
[   29.498945] VP_IDE: VIA vt82c596b (rev 23) IDE UDMA66 controller on pci0000:00:04.1
[   29.498968]     ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:pio
[   29.498998]     ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:DMA, hdd:pio
[   29.499018] Probing IDE interface ide0...
[   29.561273] usbcore: registered new interface driver usbfs
[   29.561381] usbcore: registered new interface driver hub
[   29.561471] usbcore: registered new device driver usb
[   29.566953] USB Universal Host Controller Interface driver v3.0
[   29.608606] via-rhine.c:v1.10-LK1.4.2 Sept-11-2006 Written by Donald Becker
[    8.684000] Time: acpi_pm clocksource has been installed.
[    8.884000] hda: HL-DT-ST GCE-8526B, ATAPI CD/DVD-ROM drive
[    9.556000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[    9.556000] Probing IDE interface ide1...
[    9.972000] hdc: SAMSUNG SP0411N, ATA DISK drive
[   10.644000] ide1 at 0x170-0x177,0x376 on irq 15
[   10.676000] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 6
[   10.676000] PCI: setting IRQ 6 as level-triggered
[   10.676000] ACPI: PCI Interrupt 0000:00:04.2[D] -> Link [LNKD] -> GSI 6 (level, low) -> IRQ 6
[   10.676000] uhci_hcd 0000:00:04.2: UHCI Host Controller
[   10.684000] SCSI subsystem initialized
[   10.724000] libata version 2.20 loaded.
[   10.736000] uhci_hcd 0000:00:04.2: new USB bus registered, assigned bus number 1
[   10.736000] uhci_hcd 0000:00:04.2: irq 6, io base 0x0000d400
[   10.736000] usb usb1: configuration #1 chosen from 1 choice
[   10.736000] hub 1-0:1.0: USB hub found
[   10.736000] hub 1-0:1.0: 2 ports detected
[   10.840000] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
[   10.840000] PCI: setting IRQ 5 as level-triggered
[   10.840000] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
[   10.844000] eth0: VIA Rhine III at 0x1d000, 00:40:f4:61:85:fe, IRQ 5.
[   10.844000] eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 41e1.
[   10.844000] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
[   10.844000] PCI: setting IRQ 10 as level-triggered
[   10.844000] ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
[   10.848000] eth1: VIA Rhine III at 0x1b800, 00:40:f4:a2:a4:4f, IRQ 10.
[   10.848000] eth1: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000.
[   10.948000] hda: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
[   10.948000] Uniform CD-ROM driver Revision: 3.20
[   10.960000] hdc: max request size: 512KiB
[   10.968000] hdc: Host Protected Area detected.
[   10.968000]    current capacity is 66055245 sectors (33820 MB)
[   10.968000]    native  capacity is 78242976 sectors (40060 MB)
[   10.984000] hdc: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
[   10.984000] hdc: task_no_data_intr: error=0x04 { DriveStatusError }
[   10.984000] ide: failed opcode was: 0x37
[   10.984000] hdc: 66055245 sectors (33820 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(33)
[   10.984000] hdc: cache flushes supported
[   10.984000]  hdc: hdc1 hdc2 < hdc5 >
[   11.208000] usb 1-2: new low speed USB device using uhci_hcd and address 2
[   11.384000] usb 1-2: configuration #1 chosen from 1 choice
[   11.444000] usbcore: registered new interface driver hiddev
[   11.488000] input: USB Keyboard USB Keyboard as /class/input/input1
[   11.488000] input: USB HID v1.10 Keyboard [USB Keyboard USB Keyboard] on usb-0000:00:04.2-2
[   11.512000] Attempting manual resume
[   11.512000] swsusp: Resume From Partition 22:5
[   11.512000] PM: Checking swsusp image.
[   11.512000] PM: Resume from disk failed.
[   11.520000] input: USB Keyboard USB Keyboard as /class/input/input2
[   11.520000] input: USB HID v1.10 Device [USB Keyboard USB Keyboard] on usb-0000:00:04.2-2
[   11.520000] usbcore: registered new interface driver usbhid
[   11.520000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[   11.672000] kjournald starting.  Commit interval 5 seconds
[   11.672000] EXT3-fs warning (device hdc1): ext3_clear_journal_err: Filesystem error recorded from previous mount: IO failure
[   11.672000] EXT3-fs warning (device hdc1): ext3_clear_journal_err: Marking fs in need of filesystem check.
[   11.672000] EXT3-fs: mounted filesystem with ordered data mode.
[   23.444000] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[   23.512000] eth1: link down
[   25.268000] NET: Registered protocol family 17
[   28.260000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   28.288000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   29.656000] Linux agpgart interface v0.102 (c) Dave Jones
[   30.108000] agpgart: Detected VIA Apollo Pro 133 chipset
[   30.112000] agpgart: AGP aperture is 64M @ 0xe4000000
[   30.184000] input: PC Speaker as /class/input/input3
[   30.364000] input: ImPS/2 Generic Wheel Mouse as /class/input/input4
[   31.912000] nvidia: module license 'NVIDIA' taints kernel.
[   32.188000] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[   32.188000] PCI: setting IRQ 11 as level-triggered
[   32.188000] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[   32.188000] NVRM: loading NVIDIA Linux x86 Kernel Module  1.0-9631  Thu Nov  9 17:38:10 PST 2006
[   32.232000] parport: PnPBIOS parport detected.
[   32.232000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[   33.204000] ACPI: PCI Interrupt 0000:00:0c.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[   33.756000] gameport: CS4281 Gameport is pci0000:00:0c.0/gameport0, speed 2982kHz
[   34.120000] fuse init (API version 7.
[   34.184000] lp0: using parport0 (interrupt-driven).
[   34.292000] Adding 1124508k swap on /dev/disk/by-uuid/50c9ec28-a538-4371-8aff-3caa2889ded0.  Priority:-1 extents:1 across:1124508k
[   71.748000] NET: Registered protocol family 10
[   71.748000] lo: Disabled Privacy Extensions
[   71.748000] ADDRCONF(NETDEV_UP): eth1: link is not ready
[   82.392000] eth0: no IPv6 routers present
[  119.340000] EXT3 FS on hdc1, internal journal
[  125.788000] PPP generic driver version 2.4.2
[  125.920000] NET: Registered protocol family 24
[  127.472000] ibm_acpi: ec object not found
[  127.764000] No dock devices found.
[  127.920000] input: Power Button (FF) as /class/input/input5
[  127.920000] ACPI: Power Button (FF) [PWRF]
[  127.948000] input: Power Button (CM) as /class/input/input6
[  127.948000] ACPI: Power Button (CM) [PWRB]
[  128.212000] Using specific hotkey driver
[  128.508000] pcc_acpi: loading...
[  131.436000] ip_tables: (C) 2000-2006 Netfilter Core Team
[  140.276000] ppdev: user-space parallel port driver
[  141.944000] agpgart: Found an AGP 1.0 compliant device at 0000:00:00.0.
[  141.944000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 2x mode
[  141.944000] agpgart: Putting AGP V2 device at 0000:01:00.0 into 2x mode
[  146.444000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[  146.444000] apm: overridden by ACPI.
[  147.580000] Bluetooth: Core ver 2.11
[  147.580000] NET: Registered protocol family 31
[  147.580000] Bluetooth: HCI device and connection manager initialized
[  147.580000] Bluetooth: HCI socket layer initialized
[  147.820000] Bluetooth: L2CAP ver 2.8
[  147.820000] Bluetooth: L2CAP socket layer initialized
[  147.832000] Bluetooth: RFCOMM socket layer initialized
[  147.832000] Bluetooth: RFCOMM TTY layer initialized
[  147.832000] Bluetooth: RFCOMM ver 1.8
[  155.260000] eth0: no IPv6 routers present

[Strokes]

### INICIO DO LSPCI ###
00:00.0 Host bridge: VIA Technologies, Inc. VT82C693A/694x [Apollo PRO133x] (rev 44)
   Flags: bus master, medium devsel, latency 0
   Memory at e4000000 (32-bit, prefetchable) [size=64M]
   Capabilities: <access denied>

00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo MVP3/Pro133x AGP] (prog-if 00 [Normal decode])
   Flags: bus master, 66MHz, medium devsel, latency 0
   Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
   Memory behind bridge: d6000000-d7efffff
   Prefetchable memory behind bridge: d7f00000-e3ffffff
   Capabilities: <access denied>

00:04.0 ISA bridge: VIA Technologies, Inc. VT82C596 ISA [Mobile South] (rev 23)
   Flags: bus master, stepping, medium devsel, latency 0

00:04.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 10) (prog-if 8a [Master SecP PriP])
   Flags: bus master, stepping, medium devsel, latency 32
   [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
   [virtual] Memory at 000003f0 (type 3, non-prefetchable)
   [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
   [virtual] Memory at 00000370 (type 3, non-prefetchable)
   I/O ports at d800 [size=16]
   Capabilities: <access denied>

00:04.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 11) (prog-if 00 [UHCI])
   Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
   Flags: bus master, medium devsel, latency 32, IRQ 6
   I/O ports at d400 [size=32]
   Capabilities: <access denied>

00:04.3 Host bridge: VIA Technologies, Inc. VT82C596 Power Management (rev 30)
   Flags: medium devsel

00:0a.0 Ethernet controller: VIA Technologies, Inc. VT6105 [Rhine-III] (rev 86)
   Subsystem: VIA Technologies, Inc. Unknown device 0105
   Flags: bus master, stepping, medium devsel, latency 32, IRQ 5
   I/O ports at d000 [size=256]
   Memory at d5800000 (32-bit, non-prefetchable) [size=256]
   Capabilities: <access denied>

00:0b.0 Ethernet controller: VIA Technologies, Inc. VT6105 [Rhine-III] (rev 8b)
   Subsystem: VIA Technologies, Inc. Unknown device 0105
   Flags: bus master, stepping, medium devsel, latency 32, IRQ 10
   I/O ports at b800 [size=256]
   Memory at d5000000 (32-bit, non-prefetchable) [size=256]
   Capabilities: <access denied>

00:0c.0 Multimedia audio controller: Cirrus Logic Crystal CS4281 PCI Audio (rev 01)
   Flags: bus master, medium devsel, latency 32, IRQ 11
   Memory at d4800000 (32-bit, non-prefetchable) [size=4K]
   Memory at d4000000 (32-bit, non-prefetchable) [size=64K]
   Capabilities: <access denied>

01:00.0 VGA compatible controller: nVidia Corporation NV18 [GeForce4 MX 4000 AGP 8x] (rev c1) (prog-if 00 [VGA])

[Mythus]

00:0c.0 Multimedia audio controller: Cirrus Logic Crystal CS4281 PCI Audio (rev 01)
   Flags: bus master, medium devsel, latency 32, IRQ 11
   Memory at d4800000 (32-bit, non-prefetchable) [size=4K]
   Memory at d4000000 (32-bit, non-prefetchable) [size=64K]
   Capabilities: <access denied>

[   22.956685] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[   32.188000] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[   32.188000] PCI: setting IRQ 11 as level-triggered
[   32.188000] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[   33.204000] ACPI: PCI Interrupt 0000:00:0c.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[   33.756000] gameport: CS4281 Gameport is pci0000:00:0c.0/gameport0, speed 2982kHz

O que você precisava colar era só isso aqui em cima.^^

Você é a primeira pessoa que eu vejo que colocou o CD/DVD Rom no master da primeira ide e o hd como master da segunda ide!

Mas voltando ao que interessa.

Não sei como é a sua leitura de inglês, mas aqui: https://help.ubuntu.com/community/HowToSetupSoundCards tem um tutorial de como instalar a placa de som.

com algumas diferenças pro seu hardware:
sudo modprobe snd-cs4281
alsamixer
sudo gedit /etc/modules
snd-cs4281
sudo modprobe snd-cs4281 port=0x220(tem que ver na bios) irq=11 dma1=1(tem que verna bios) *Ele diz que "acha"! Pode ser que a sua placa não precise.
alsamixer

Em http://alsa.opensrc.org/index.php/ALSA_modules Justamente a sua placa não tem informação, mas em compensação http://www.thinkwiki.org/index.php?title=CS4281 mostra que ela é compatível.

Vai postando as mensagens de erro e perguntando que eu vou respondendo na medida do possível.

[Strokes]

00:0c.0 Multimedia audio controller: Cirrus Logic Crystal CS4281 PCI Audio (rev 01)
   Flags: bus master, medium devsel, latency 32, IRQ 11
   Memory at d4800000 (32-bit, non-prefetchable) [size=4K]
   Memory at d4000000 (32-bit, non-prefetchable) [size=64K]
   Capabilities: <access denied>

[   22.956685] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[   32.188000] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[   32.188000] PCI: setting IRQ 11 as level-triggered
[   32.188000] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[   33.204000] ACPI: PCI Interrupt 0000:00:0c.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[   33.756000] gameport: CS4281 Gameport is pci0000:00:0c.0/gameport0, speed 2982kHz

O que você precisava colar era só isso aqui em cima.^^

Pois é mas como você citou ali eu tava meio inseguro, não sei muita coisa de linux

Você é a primeira pessoa que eu vejo que colocou o CD/DVD Rom no master da primeira ide e o hd como master da segunda ide!

Eu sei, mas é que por alguma causa, a minha BIOS não lê o driver de CD na master da primeira ide

Não sei como é a sua leitura de inglês, mas aqui: https://help.ubuntu.com/community/HowToSetupSoundCards tem um tutorial de como instalar a placa de som.

com algumas diferenças pro seu hardware:
sudo modprobe snd-cs4281
alsamixer
sudo gedit /etc/modules
snd-cs4281
sudo modprobe snd-cs4281 port=0x220(tem que ver na bios) irq=11 dma1=1(tem que verna bios) *Ele diz que "acha"! Pode ser que a sua placa não precise.
alsamixer

Em http://alsa.opensrc.org/index.php/ALSA_modules Justamente a sua placa não tem informação, mas em compensação http://www.thinkwiki.org/index.php?title=CS4281 mostra que ela é compatível.

Vai postando as mensagens de erro e perguntando que eu vou respondendo na medida do possível.

Ok, vou dar uma lida e testar, to sem lente agora, mais além eu vou postando!
Vlw pela ajuda!!
Abraço

---------------
EDIT:
Não consegui fazer aquela parte onde precisa das informações da BIOS @_@

[Mythus]

Com

Código: [Selecionar]

sudo lspci -v aparece a porta, mas ainda assim, vais ter que catar o DMA lá.

Em todo caso, esse é um passo que talvez você possa ignorá-lo.

O driver já está carregado?

Código: [Selecionar]

lsmod |grep snd

[Strokes]

snd_cs4281             23200  1
gameport               16520  2 snd_cs4281
snd_ac97_codec         98464  1 snd_cs4281
ac97_bus                3200  1 snd_ac97_codec
snd_pcm_oss            44544  0
snd_mixer_oss          17408  2 snd_pcm_oss
snd_pcm                79876  3 snd_cs4281,snd_ac97_codec,snd_pcm_oss
snd_page_alloc         10888  1 snd_pcm
snd_opl3_lib           11520  1 snd_cs4281
snd_hwdep               9988  1 snd_opl3_lib
snd_seq_dummy           4740  0
snd_seq_oss            32896  0
snd_seq_midi            9600  0
snd_rawmidi            25472  2 snd_cs4281,snd_seq_midi
snd_seq_midi_event      8448  2 snd_seq_oss,snd_seq_midi
snd_seq                52592  6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer              23684  3 snd_pcm,snd_opl3_lib,snd_seq
snd_seq_device          9100  6 snd_opl3_lib,snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
snd                    54020  12 snd_cs4281,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_opl3_lib,snd_hwdep,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore               8672  2 snd

Que coisa, ainda não tá funcionando! T_T

[Mythus]

você seguiu todas as linhas sem mensagens de erro? e continua com o mesmo erro inicial? e no dmesg aparece algum erro?

[Strokes]

Sim sim, continua o mesmo maldito erro!!

PS: vo terminar de fazer umas coisas aqui, e vo re fazer tudo de novo X_X

[Strokes]

Ok, fiz tooooooooooooooodos os passos, li milhões de vezes aquele tutorial lá, e ainda não funciona

[Mythus]

Ok, fiz tooooooooooooooodos os passos, li milhões de vezes aquele tutorial lá, e ainda não funciona

Eu poderia te ajudar melhor se você colasse no tópico as mensagens que aparecem no terminal.

[Strokes]

Ok, fiz tooooooooooooooodos os passos, li milhões de vezes aquele tutorial lá, e ainda não funciona

Eu poderia te ajudar melhor se você colasse no tópico as mensagens que aparecem no terminal.

Mas não rola nenhuma msg, no terminal executando aqueles comandos =/