Ubuntu 10.04 e Bluetooth

[cassioso]

Saudações! 


Tenho um LG X110, cujo dispositivo de bluetooth era reconhecido pelo Ubuntu 9.10 e 9.04. Com o update para o 10.04, o bluetooth não é mais reconhecido.

Quando executo do bluetooth analyzer, aparece a seguinte mensagem de erro:

Não foi possível iniciar "Bluetooth Analyzer"

Falha ao executar processo filho "bluetooth-analyzer" (Arquivo ou diretório não encontrado)

Já tentei reinstalar os aplicativos relacionados ao bluetooth, assim como suas dependências, mas não funciona.
Alguém aí poderia me nortear em relação a  este problema?

Obs.: Fora este problema, o ubntu funcinoa 100% no Lg X110 Webcam, USB e rede, todos ok.

[mpmoraes]

Já verificou se existem drivers proprietários a serem instalados?

[cassioso]

Olá mpmoraes,

Já verifiquei sim. No Ubuntu 9.10 não utilizava nenhum driver proprietário. E aqui no 10.04 também não é exibido na lista de drivers proprietários.

[Tota]

Eu tive este problema no 10.04RC, mas resolveu com as atualizações.

Bluez, bluez-utils, etc estão instalados?

O que quer conectar via bluetooth?

Este LG x110 tem BT na placa ou voce usa um dongle?

[],s

[cassioso]

Olá Tota,

Bluez, bluez-utils.. estão instalados. O que quero conectar via bluetooth é um Nokia Xpressmusic 3150. Entretanto, o erro vem antes de tentar conectar. Não está nem listando dispositivos, etc.. O erro que citei ocorre logo que inicio o bluetooth analyzer.

[Tota]

Ok, entendi e não entendi.

O problema é no bluetooth-analyzer

http://linux.die.net/man/1/bluetooth-analyzer

Nos repositorios só tem os bluez da vida=> http://packages.ubuntu.com/lucid/bluetooth

donde o bluetooth-analyzer faz parte

Normalmente eu ligo o BT na maquina e no celular, clico no icone do BT no painel e faço a associação BT

Nos Nokia, por usarem o sistema Symbian, é necessário instalar os pacotes Obex para fazer funcionar.

Quando executo do bluetooth analyzer, aparece a seguinte mensagem de erro:

Como você faz isto?, tem um passo a passo, tipo, eu clico aqui, ali , etc...


[],s

[cassioso]

Certo, explico melhor:

Tem o comando bluetooth-analyzer e o bluetooth-properties. O primeiro fica em Aplicativos > Sistema > Bluetooth Analyzer e o segundo em Sistema > Preferências > Bluetooth.

Quando executo o bluetooth-analyzer aparece uma tela de erro que com a mensagem:

Não foi possível iniciar "Bluetooth Analyzer"

Falha ao executar processo filho "bluetooth-analyzer" (Arquivo ou diretório não encontrado)

Acabo de perceber que este comando não está no path... 

cassioso@capoeira:~$ blue
blueman-adapters      blueman-assistant     blueman-manager       blueman-services      bluetooth-applet      bluetooth-properties  bluetooth-wizard
blueman-applet        blueman-browse        blueman-sendto        bluetooth-agent       bluetoothd            bluetooth-sendto

Então esta mensagem de erro deve fazer referência a ausência do aplicativo solicitado, e não ao bluetooth em si. Tentei executar o bluetooth-properties então, e a tela que abre tem a mensagem:

Seu computador não possui qualquer adaptador Bluetooth acoplado.

Rodando pelo terminal, passando o parâmetro -d (-d, --dump-devices Lista os dispositivos conhecidos atualmente) tenho o seguinte retorno:

cassioso@capoeira:~$ bluetooth-properties -d
No known devices
Is bluetoothd running, and a Bluetooth adapter enabled?

Não sei bem como verificar se o bluetoothd está rodando. Tentei com ps aux, que não reportou nada:

cassioso@capoeira:~$ ps aux | grep bluetoothd
cassioso  4456  0.0  0.0   3140   812 pts/0    S+   01:37   0:00 grep bluetoothd

Tentei o ps aux com bluetooth somente também:

cassioso@capoeira:~$ ps aux | grep bluetooth
cassioso  1795  0.0  0.4  19620  4928 ?        S    00:46   0:00 bluetooth-applet
cassioso  4610  0.0  0.0   3144   820 pts/0    S+   01:38   0:00 grep bluetooth

(como root tem os mesmos retornos)

Apesar de indicar que o bluetooth-applet está em execução, não aparece o trayicon na bandeja do sistema. Então, matei o processo e tentei executa-lo novamente usando bluetooth-applet -d para ver a saída de debug, mas nada acontece. Executando sem parâmetros também não acontece nada. Em ambos os casos o terminal fica preso sem imprimir nada.

Estou pesquisando sobre esse Bluetooth adapter que a mensagem de erro do bluetooth-properties cita.

[Tota]

Ô amigo, melhorou 1000%

agora sabemos tudo.

Sugiro ir do zero: lsusb, lspci para saber onde está seu adaptador

Verifique o output do dmesg à respeito do bt

Se não aparecer nada, veja a prosaica chave liga/desliga ou teste o atalho de teclado para isto

tendo certeza que seu adaptador está operante aí sim, vamos ver o que ocorre

[],s

[cassioso]

Realmente este detalhamento me ajudou a entender também.

O lsusb, lspci e dmsg não retornaram nada a respeito do bluetooth. Aqui não tem um botão de liga/desliga do bluetooth, só do wireless mesmo... A seguir a saída dos comandos:

lsusb

Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 0bda:0158 Realtek Semiconductor Corp. Mass Storage Device
Bus 001 Device 002: ID 5986:0203 Acer, Inc
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

lspci

00:00.0 Host bridge: Intel Corporation Mobile 945GME Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GME Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev 02)
00:1c.2 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 3 (rev 02)
00:1d.0 USB Controller: Intel Corporation N10/ICH7 Family USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller (rev 02)
01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)
02:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8187SE Wireless LAN Controller (rev 22)

[cassioso]

o gigante dmesg passa dos 20000 caracteres, vai em suaves prestações então:

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.32-22-generic (buildd@rothera) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #33-Ubuntu SMP Wed Apr 28 13:27:30 UTC 2010 (Ubuntu 2.6.32-22.33-generic 2.6.32.11+drm33.2)
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
[    0.000000]  BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000003f5b2000 (usable)
[    0.000000]  BIOS-e820: 000000003f5b2000 - 000000003f5d5000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000003f5d5000 - 000000003f5e6000 (reserved)
[    0.000000]  BIOS-e820: 000000003f5e6000 - 000000003f5e9000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000003f5e9000 - 000000003f605000 (reserved)
[    0.000000]  BIOS-e820: 000000003f605000 - 000000003f606000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000003f606000 - 000000003f608000 (reserved)
[    0.000000]  BIOS-e820: 000000003f608000 - 000000003f611000 (ACPI data)
[    0.000000]  BIOS-e820: 000000003f611000 - 000000003f617000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000003f617000 - 000000003f700000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved)
[    0.000000]  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[    0.000000] DMI 2.4 present.
[    0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] last_pfn = 0x3f5b2 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-DBFFF write-protect
[    0.000000]   DC000-E7FFF write-through
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask 0C0000000 write-back
[    0.000000]   1 base 03F700000 mask 0FFF00000 uncachable
[    0.000000]   2 base 03F800000 mask 0FF800000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] Scanning 0 areas for low memory corruption
[    0.000000] modified physical RAM map:
[    0.000000]  modified: 0000000000000000 - 0000000000010000 (reserved)
[    0.000000]  modified: 0000000000010000 - 000000000009ec00 (usable)
[    0.000000]  modified: 000000000009ec00 - 00000000000a0000 (reserved)
[    0.000000]  modified: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  modified: 0000000000100000 - 000000003f5b2000 (usable)
[    0.000000]  modified: 000000003f5b2000 - 000000003f5d5000 (ACPI NVS)
[    0.000000]  modified: 000000003f5d5000 - 000000003f5e6000 (reserved)
[    0.000000]  modified: 000000003f5e6000 - 000000003f5e9000 (ACPI NVS)
[    0.000000]  modified: 000000003f5e9000 - 000000003f605000 (reserved)
[    0.000000]  modified: 000000003f605000 - 000000003f606000 (ACPI NVS)
[    0.000000]  modified: 000000003f606000 - 000000003f608000 (reserved)
[    0.000000]  modified: 000000003f608000 - 000000003f611000 (ACPI data)
[    0.000000]  modified: 000000003f611000 - 000000003f617000 (ACPI NVS)
[    0.000000]  modified: 000000003f617000 - 000000003f700000 (reserved)
[    0.000000]  modified: 00000000ffb00000 - 00000000ffc00000 (reserved)
[    0.000000]  modified: 00000000fff00000 - 0000000100000000 (reserved)
[    0.000000] initial memory mapped : 0 - 00c00000
[    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[    0.000000] Using x86 segment limits to approximate NX protection
[    0.000000]  0000000000 - 0000400000 page 4k
[    0.000000]  0000400000 - 0037400000 page 2M
[    0.000000]  0037400000 - 00377fe000 page 4k
[    0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000
[    0.000000] RAMDISK: 37858000 - 37fef722
[    0.000000] Allocated new RAMDISK: 008de000 - 01075722
[    0.000000] Move RAMDISK from 0000000037858000 - 0000000037fef721 to 008de000 - 01075721
[    0.000000] ACPI: RSDP 000f03c0 00024 (v02    LGE)
[    0.000000] ACPI: XSDT 3f60ff10 0004C (v01    LGE     LGPC 06222004 MSFT 00010013)
[    0.000000] ACPI: FACP 3f5e6c10 000F4 (v04    LGE     LGPC 06222004 MSFT 00010013)
[    0.000000] ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20090903/tbfadt-369)
[    0.000000] ACPI Warning: 32/64X FACS address mismatch in FADT - 3F611E40/000000003F611D40, using 32 (20090903/tbfadt-486)
[    0.000000] ACPI: DSDT 3f608010 057B2 (v01    LGE     LGPC 00000000 INTL 20051117)
[    0.000000] ACPI: FACS 3f611e40 00040
[    0.000000] ACPI: APIC 3f610e90 0005C (v02    LGE     LGPC 06222004 MSFT 00010013)
[    0.000000] ACPI: SSDT 3f605510 004CE (v02  PmRef    CpuPm 00003000 INTL 20051117)
[    0.000000] ACPI: SSDT 3f5e8a10 00232 (v02  PmRef  Cpu0Tst 00003000 INTL 20051117)
[    0.000000] ACPI: SSDT 3f611a10 000A0 (v02  PmRef  Cpu1Tst 00003000 INTL 20051117)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 125MB HIGHMEM available.
[    0.000000] 887MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 377fe000
[    0.000000]   low ram: 0 - 377fe000
[    0.000000]   node 0 low ram: 00000000 - 377fe000
[    0.000000]   node 0 bootmap 00011000 - 00017f00
[    0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
[    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
[    0.000000]   #3 [0000100000 - 00008d9e98]    TEXT DATA BSS ==> [0000100000 - 00008d9e98]
[    0.000000]   #4 [000009ec00 - 0000100000]    BIOS reserved ==> [000009ec00 - 0000100000]
[    0.000000]   #5 [00008da000 - 00008dd16c]              BRK ==> [00008da000 - 00008dd16c]
[    0.000000]   #6 [0000010000 - 0000011000]          PGTABLE ==> [0000010000 - 0000011000]
[    0.000000]   #7 [00008de000 - 0001075722]      NEW RAMDISK ==> [00008de000 - 0001075722]
[    0.000000]   #8 [0000011000 - 0000018000]          BOOTMAP ==> [0000011000 - 0000018000]
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x000377fe
[    0.000000]   HighMem  0x000377fe -> 0x0003f5b2
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009e
[    0.000000]     0: 0x00000100 -> 0x0003f5b2
[    0.000000] On node 0 totalpages: 259392
[    0.000000] free_area_init_node: node 0, pgdat c0798720, node_mem_map c1077200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3950 pages, LIFO batch:0
[    0.000000]   Normal zone: 1744 pages used for memmap
[    0.000000]   Normal zone: 221486 pages, LIFO batch:31
[    0.000000]   HighMem zone: 252 pages used for memmap
[    0.000000]   HighMem zone: 31928 pages, LIFO batch:7
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 24
[    0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 3f700000 (gap: 3f700000:c0400000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages/cpu @c1c00000 s36024 r0 d21320 u2097152
[    0.000000] pcpu-alloc: s36024 r0 d21320 u2097152 alloc=1*4194304
[    0.000000] pcpu-alloc:

• 0 1

[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 257364
[    0.000000] Kernel command line: root=UUID=2f239dbf-c42d-4a5e-82cf-43f2ea3f3e82 ro locale=pt_BR vga=786 splash
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] allocated 5189800 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Initializing HighMem for node 0 (000377fe:0003f5b2)
[    0.000000] Memory: 1007076k/1038024k available (4673k kernel code, 29980k reserved, 2121k data, 656k init, 128720k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff1d000 - 0xfffff000   ( 904 kB)
[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
[    0.000000]       .init : 0xc07a3000 - 0xc0847000   ( 656 kB)
[    0.000000]       .data : 0xc0590653 - 0xc07a2e48   (2121 kB)
[    0.000000]       .text : 0xc0100000 - 0xc0590653   (4673 kB)

[cassioso]

continuação...

[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:2304 nr_irqs:424
[    0.000000] Extended CMOS year: 2000
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 1599.876 MHz processor.
[    0.008008] Calibrating delay loop (skipped), value calculated using timer frequency.. 3199.75 BogoMIPS (lpj=6399504)
[    0.008061] Security Framework initialized
[    0.008112] AppArmor: AppArmor initialized
[    0.008136] Mount-cache hash table entries: 512
[    0.008379] Initializing cgroup subsys ns
[    0.008397] Initializing cgroup subsys cpuacct
[    0.008414] Initializing cgroup subsys memory
[    0.008434] Initializing cgroup subsys devices
[    0.008447] Initializing cgroup subsys freezer
[    0.008459] Initializing cgroup subsys net_cls
[    0.008502] CPU: L1 I cache: 32K, L1 D cache: 24K
[    0.008517] CPU: L2 cache: 512K
[    0.008528] CPU: Physical Processor ID: 0
[    0.008538] CPU: Processor Core ID: 0
[    0.008551] mce: CPU supports 5 MCE banks
[    0.008575] CPU0: Thermal monitoring enabled (TM2)
[    0.008591] using mwait in idle threads.
[    0.008608] Performance Events: Atom events, Intel PMU driver.
[    0.008634] ... version:                3
[    0.008645] ... bit width:              40
[    0.008655] ... generic registers:      2
[    0.008666] ... value mask:             000000ffffffffff
[    0.008679] ... max period:             000000007fffffff
[    0.008691] ... fixed-purpose events:   3
[    0.008701] ... event mask:             0000000700000003
[    0.008717] Checking 'hlt' instruction... OK.
[    0.024012] Disabling 4MB page tables to avoid TLB bug
[    0.028355] ACPI: Core revision 20090903
[    0.044019] ftrace: converting mcount calls to 0f 1f 44 00 00
[    0.044042] ftrace: allocating 21771 entries in 43 pages
[    0.048103] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.048402] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[    0.089925] CPU0: Intel(R) Atom(TM) CPU N270   @ 1.60GHz stepping 02
[    0.092001] Booting processor 1 APIC 0x1 ip 0x6000
[    0.012000] Initializing CPU#1
[    0.012000] CPU: L1 I cache: 32K, L1 D cache: 24K
[    0.012000] CPU: L2 cache: 512K
[    0.012000] CPU: Physical Processor ID: 0
[    0.012000] CPU: Processor Core ID: 0
[    0.012000] CPU1: Thermal monitoring enabled (TM2)
[    0.176149] CPU1: Intel(R) Atom(TM) CPU N270   @ 1.60GHz stepping 02
[    0.176236] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[    0.180034] Brought up 2 CPUs
[    0.180049] Total of 2 processors activated (6399.94 BogoMIPS).
[    0.180292] CPU0 attaching sched-domain:
[    0.180301]  domain 0: span 0-1 level SIBLING
[    0.180308]   groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
[    0.180320]   domain 1: span 0-1 level MC
[    0.180326]    groups: 0-1 (cpu_power = 1178)
[    0.180338] CPU1 attaching sched-domain:
[    0.180343]  domain 0: span 0-1 level SIBLING
[    0.180348]   groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
[    0.180360]   domain 1: span 0-1 level MC
[    0.180365]    groups: 0-1 (cpu_power = 1178)
[    0.180594] devtmpfs: initialized
[    0.180594] regulator: core version 0.5
[    0.180594] Time:  3:45:52  Date: 05/08/10
[    0.180594] NET: Registered protocol family 16
[    0.180594] Trying to unpack rootfs image as initramfs...
[    0.180594] EISA bus registered
[    0.180614] ACPI: bus type pci registered
[    0.267290] PCI: Using configuration type 1 for base access
[    0.270671] bio: create slab <bio-0> at 0
[    0.272908] ACPI: EC: Look up EC in DSDT
[    0.275319] ACPI: Executed 1 blocks of module-level executable AML code
[    0.281567] ACPI: BIOS _OSI(Linux) query ignored
[    0.287305] ACPI: Interpreter enabled
[    0.287340] ACPI: (supports S0 S1 S3 S4 S5)
[    0.287441] ACPI: Using IOAPIC for interrupt routing
[    0.307078] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    0.307662] ACPI: No dock devices found.
[    0.308474] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.308682] pci 0000:00:02.0: reg 10 32bit mmio: [0xdfe80000-0xdfefffff]
[    0.308696] pci 0000:00:02.0: reg 14 io port: [0xd0f0-0xd0f7]
[    0.308708] pci 0000:00:02.0: reg 18 32bit mmio pref: [0xc0000000-0xcfffffff]
[    0.308721] pci 0000:00:02.0: reg 1c 32bit mmio: [0xdff00000-0xdff3ffff]
[    0.308789] pci 0000:00:02.1: reg 10 32bit mmio: [0xdfe00000-0xdfe7ffff]
[    0.308923] pci 0000:00:1b.0: reg 10 64bit mmio: [0xffe00000-0xffe03fff]
[    0.308992] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.309017] pci 0000:00:1b.0: PME# disabled
[    0.309131] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.309155] pci 0000:00:1c.0: PME# disabled
[    0.309275] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.309298] pci 0000:00:1c.2: PME# disabled
[    0.309384] pci 0000:00:1d.0: reg 20 io port: [0xd080-0xd09f]
[    0.309462] pci 0000:00:1d.1: reg 20 io port: [0xd060-0xd07f]
[    0.309539] pci 0000:00:1d.2: reg 20 io port: [0xd040-0xd05f]
[    0.309616] pci 0000:00:1d.3: reg 20 io port: [0xd020-0xd03f]
[    0.309699] pci 0000:00:1d.7: reg 10 32bit mmio: [0xdff40000-0xdff403ff]
[    0.309772] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.309796] pci 0000:00:1d.7: PME# disabled
[    0.309994] pci 0000:00:1f.0: Force enabled HPET at 0xfed03000
[    0.310013] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
[    0.310042] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
[    0.310065] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 004c (mask 0007)
[    0.310171] pci 0000:00:1f.2: reg 10 io port: [0xd0e0-0xd0e7]
[    0.310187] pci 0000:00:1f.2: reg 14 io port: [0xd0d0-0xd0d3]
[    0.310202] pci 0000:00:1f.2: reg 18 io port: [0xd0c0-0xd0c7]
[    0.310217] pci 0000:00:1f.2: reg 1c io port: [0xd0b0-0xd0b3]
[    0.310233] pci 0000:00:1f.2: reg 20 io port: [0xd0a0-0xd0af]
[    0.310274] pci 0000:00:1f.2: PME# supported from D3hot
[    0.310295] pci 0000:00:1f.2: PME# disabled
[    0.310390] pci 0000:01:00.0: reg 10 io port: [0xc000-0xc0ff]
[    0.310422] pci 0000:01:00.0: reg 18 64bit mmio pref: [0xffd10000-0xffd10fff]
[    0.310446] pci 0000:01:00.0: reg 20 64bit mmio pref: [0xffd00000-0xffd0ffff]
[    0.310463] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xdfd00000-0xdfd0ffff]
[    0.310519] pci 0000:01:00.0: supports D1 D2
[    0.310527] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.310550] pci 0000:01:00.0: PME# disabled
[    0.310634] pci 0000:00:1c.0: bridge io port: [0xc000-0xcfff]
[    0.310645] pci 0000:00:1c.0: bridge 32bit mmio: [0xdfd00000-0xdfdfffff]
[    0.310659] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xffd00000-0xffdfffff]
[    0.310730] pci 0000:02:00.0: reg 10 io port: [0xb000-0xb0ff]
[    0.310747] pci 0000:02:00.0: reg 14 32bit mmio: [0xdfc00000-0xdfc03fff]
[    0.310832] pci 0000:02:00.0: supports D1 D2
[    0.310840] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot
[    0.310862] pci 0000:02:00.0: PME# disabled
[    0.310941] pci 0000:00:1c.2: bridge io port: [0xb000-0xbfff]
[    0.310953] pci 0000:00:1c.2: bridge 32bit mmio: [0xdfc00000-0xdfcfffff]
[    0.311038] pci 0000:00:1e.0: transparent bridge
[    0.311085] pci_bus 0000:00: on NUMA node 0
[    0.311104] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.311568] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[    0.311748] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
[    0.338658] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.338993] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.339300] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.339596] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
[    0.339915] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.340254] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.340565] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.340882] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.341223] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.341271] vgaarb: loaded
[    0.341619] SCSI subsystem initialized
[    0.341881] libata version 3.00 loaded.
[    0.342145] usbcore: registered new interface driver usbfs
[    0.342206] usbcore: registered new interface driver hub
[    0.342313] usbcore: registered new device driver usb
[    0.343001] ACPI: WMI: Mapper loaded
[    0.343021] PCI: Using ACPI for IRQ routing
[    0.343399] NetLabel: Initializing
[    0.343417] NetLabel:  domain hash size = 128
[    0.343431] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.343475] NetLabel:  unlabeled traffic allowed by default
[    0.343740] hpet clockevent registered
[    0.343749] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.343775] hpet0: at MMIO 0xfed03000, IRQs 2, 8, 0
[    0.343803] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.348236] Switching to clocksource tsc
[    0.352950] AppArmor: AppArmor Filesystem Enabled
[    0.353007] pnp: PnP ACPI init
[    0.353057] ACPI: bus type pnp registered
[    0.357895] pnp: PnP ACPI: found 11 devices
[    0.357919] ACPI: ACPI bus type pnp unregistered
[    0.357939] PnPBIOS: Disabled by ACPI PNP
[    0.357984] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
[    0.358008] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
[    0.358031] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
[    0.358054] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
[    0.358094] system 00:05: ioport range 0x4d0-0x4d1 has been reserved
[    0.358130] system 00:09: ioport range 0x400-0x47f has been reserved
[    0.358153] system 00:09: ioport range 0x1180-0x119f has been reserved
[    0.358175] system 00:09: ioport range 0x500-0x53f has been reserved
[    0.358197] system 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved
[    0.358225] system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved
[    0.358248] system 00:09: iomem range 0xfed20000-0xfed23fff has been reserved
[    0.358271] system 00:09: iomem range 0xffb00000-0xffbfffff has been reserved
[    0.358297] system 00:09: iomem range 0xfc800400-0xfc800fff has been reserved
[    0.393516] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
[    0.393547] pci 0000:00:1c.0:   IO window: 0xc000-0xcfff
[    0.393570] pci 0000:00:1c.0:   MEM window: 0xdfd00000-0xdfdfffff
[    0.393592] pci 0000:00:1c.0:   PREFETCH window: 0x000000ffd00000-0x000000ffdfffff
[    0.393623] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:02
[    0.393643] pci 0000:00:1c.2:   IO window: 0xb000-0xbfff
[    0.393665] pci 0000:00:1c.2:   MEM window: 0xdfc00000-0xdfcfffff
[    0.393687] pci 0000:00:1c.2:   PREFETCH window: 0x00000040000000-0x000000401fffff
[    0.393717] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
[    0.393734] pci 0000:00:1e.0:   IO window: disabled
[    0.393754] pci 0000:00:1e.0:   MEM window: disabled
[    0.393772] pci 0000:00:1e.0:   PREFETCH window: disabled
[    0.393818]   alloc irq_desc for 16 on node -1
[    0.393825]   alloc kstat_irqs on node -1
[    0.393843] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.393868] pci 0000:00:1c.0: setting latency timer to 64
[    0.393886]   alloc irq_desc for 18 on node -1
[    0.393892]   alloc kstat_irqs on node -1
[    0.393904] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.393927] pci 0000:00:1c.2: setting latency timer to 64
[    0.393942] pci 0000:00:1e.0: setting latency timer to 64
[    0.393953] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.393962] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[    0.393971] pci_bus 0000:01: resource 0 io:  [0xc000-0xcfff]
[    0.393980] pci_bus 0000:01: resource 1 mem: [0xdfd00000-0xdfdfffff]
[    0.393989] pci_bus 0000:01: resource 2 pref mem [0xffd00000-0xffdfffff]
[    0.393998] pci_bus 0000:02: resource 0 io:  [0xb000-0xbfff]
[    0.394006] pci_bus 0000:02: resource 1 mem: [0xdfc00000-0xdfcfffff]
[    0.394015] pci_bus 0000:02: resource 2 pref mem [0x40000000-0x401fffff]
[    0.394024] pci_bus 0000:03: resource 3 io:  [0x00-0xffff]
[    0.394033] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffff]
[    0.394132] NET: Registered protocol family 2
[    0.394425] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.395387] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.396581] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.397166] TCP: Hash tables configured (established 131072 bind 65536)
[    0.397201] TCP reno registered
[    0.397521] NET: Registered protocol family 1
[    0.397592] pci 0000:00:02.0: Boot video device
[    0.398393] cpufreq-nforce2: No nForce2 chipset.
[    0.398493] Scanning for low memory corruption every 60 seconds
[    0.398834] audit: initializing netlink socket (disabled)
[    0.398872] type=2000 audit(1273290351.398:1): initialized
[    0.420335] highmem bounce pool size: 64 pages
[    0.420367] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.425584] VFS: Disk quotas dquot_6.5.2
[    0.425795] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.427857] fuse init (API version 7.13)
[    0.428176] msgmni has been set to 1716
[    0.428868] alg: No test for stdrng (krng)
[    0.429082] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.429110] io scheduler noop registered
[    0.429125] io scheduler anticipatory registered
[    0.429141] io scheduler deadline registered
[    0.429298] io scheduler cfq registered (default)
[    0.429610]   alloc irq_desc for 24 on node -1
[    0.429618]   alloc kstat_irqs on node -1
[    0.429639] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
[    0.429656] pcieport 0000:00:1c.0: setting latency timer to 64
[    0.429860]   alloc irq_desc for 25 on node -1
[    0.429867]   alloc kstat_irqs on node -1
[    0.429885] pcieport 0000:00:1c.2: irq 25 for MSI/MSI-X
[    0.429902] pcieport 0000:00:1c.2: setting latency timer to 64
[    0.430109] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.430158] Firmware did not grant requested _OSC control
[    0.430201] Firmware did not grant requested _OSC control
[    0.430285] Firmware did not grant requested _OSC control
[    0.430319] Firmware did not grant requested _OSC control
[    0.430361] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.431057] ACPI: AC Adapter [ADP1] (on-line)
[    0.431290] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:10/PNP0C09:00/PNP0C0D:00/input/input0
[    0.431841] ACPI: Lid Switch [LID0]
[    0.432031] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    0.432060] ACPI: Power Button [PWRB]
[    0.432205] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[    0.432233] ACPI: Sleep Button [SLPB]
[    0.432379] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    0.432405] ACPI: Power Button [PWRF]
[    0.434134] ACPI: SSDT 3f5e8c90 00253 (v02  PmRef  Cpu0Ist 00003000 INTL 20051117)
[    0.435412] ACPI: SSDT 3f5e7690 00653 (v02  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    0.442244] Monitor-Mwait will be used to enter C-1 state
[    0.442349] Monitor-Mwait will be used to enter C-2 state
[    0.442447] Monitor-Mwait will be used to enter C-3 state
[    0.442474] Marking TSC unstable due to TSC halts in idle
[    0.442641] processor LNXCPU:00: registered as cooling_device0
[    0.442802] ACPI: SSDT 3f5e8f10 000D0 (v02  PmRef  Cpu1Ist 00003000 INTL 20051117)
[    0.442802] ACPI: SSDT 3f611b10 00083 (v02  PmRef  Cpu1Cst 00003000 INTL 20051117)
[    0.443070] Switching to clocksource hpet
[    0.447124] processor LNXCPU:01: registered as cooling_device1
[    0.453248] thermal LNXTHERM:01: registered as thermal_zone0
[    0.453292] ACPI: Thermal Zone [THRM] (33 C)
[    0.458580] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.462748] brd: module loaded
[    0.464348] loop: module loaded
[    0.464635] input: Macintosh mouse button emulation as /devices/virtual/input/input4
[    0.465051] ata_piix 0000:00:1f.2: version 2.13
[    0.465090]   alloc irq_desc for 19 on node -1
[    0.465097]   alloc kstat_irqs on node -1
[    0.465116] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.465146] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[    0.465294] isapnp: Scanning for PnP cards...
[    0.584513] ACPI: Battery Slot [BAT1] (battery present)
[    0.644849] ata_piix 0000:00:1f.2: setting latency timer to 64
[    0.688621] scsi0 : ata_piix
[    0.688945] scsi1 : ata_piix
[    0.689102] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xd0a0 irq 14
[    0.689125] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xd0a8 irq 15
[    0.690297] Fixed MDIO Bus: probed
[    0.690435] PPP generic driver version 2.4.2
[    0.690598] tun: Universal TUN/TAP device driver, 1.6
[    0.690616] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.690910] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.690984]   alloc irq_desc for 23 on node -1
[    0.690991]   alloc kstat_irqs on node -1
[    0.691008] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.691059] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.691069] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.691202] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.691265] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[    0.691297] ehci_hcd 0000:00:1d.7: debug port 1
[    0.695211] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    0.695341] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xdff40000
[    0.732107] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00

[cassioso]

continuação...

[    0.732449] usb usb1: configuration #1 chosen from 1 choice
[    0.732550] hub 1-0:1.0: USB hub found
[    0.732583] hub 1-0:1.0: 8 ports detected
[    0.732754] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.732814] uhci_hcd: USB Universal Host Controller Interface driver
[    0.732910] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.732940] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.732949] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.733069] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.733130] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d080
[    0.733399] usb usb2: configuration #1 chosen from 1 choice
[    0.733492] hub 2-0:1.0: USB hub found
[    0.733521] hub 2-0:1.0: 2 ports detected
[    0.733643] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.733671] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.733679] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.733785] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.733855] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d060
[    0.734121] usb usb3: configuration #1 chosen from 1 choice
[    0.734223] hub 3-0:1.0: USB hub found
[    0.734251] hub 3-0:1.0: 2 ports detected
[    0.734366] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.734393] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.734401] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.734505] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.734572] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d040
[    0.734823] usb usb4: configuration #1 chosen from 1 choice
[    0.734912] hub 4-0:1.0: USB hub found
[    0.734945] hub 4-0:1.0: 2 ports detected
[    0.735070] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[    0.735097] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    0.735105] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    0.735211] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    0.735279] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d020
[    0.735528] usb usb5: configuration #1 chosen from 1 choice
[    0.735619] hub 5-0:1.0: USB hub found
[    0.735646] hub 5-0:1.0: 2 ports detected
[    0.735895] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    0.748575] Freeing initrd memory: 7773k freed
[    0.764132] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.764179] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.764651] mice: PS/2 mouse device common for all mice
[    0.765438] rtc_cmos 00:04: RTC can wake from S4
[    0.765556] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    0.765613] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[    0.765957] device-mapper: uevent: version 1.0.3
[    0.766293] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[    0.766527] device-mapper: multipath: version 1.1.0 loaded
[    0.766546] device-mapper: multipath round-robin: version 1.0.0 loaded
[    0.766896] EISA: Probing bus 0 at eisa.0
[    0.766950] EISA: Detected 0 cards.
[    0.767379] cpuidle: using governor ladder
[    0.767724] cpuidle: using governor menu
[    0.769043] TCP cubic registered
[    0.769543] NET: Registered protocol family 10
[    0.770817] lo: Disabled Privacy Extensions
[    0.771750] NET: Registered protocol family 17
[    0.773056] Using IPI No-Shortcut mode
[    0.773325] PM: Resume from disk failed.
[    0.773353] registered taskstats version 1
[    0.773885]   Magic number: 10:145:765
[    0.774021] rtc_cmos 00:04: setting system clock to 2010-05-08 03:45:52 UTC (1273290352)
[    0.774047] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.774063] EDD information not available.
[    0.782714] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[    0.830176] isapnp: No Plug & Play device found
[    0.876803] ata1.00: ATA-8: WDC WD1600BEVT-22ZCT0, 11.01A11, max UDMA/133
[    0.876839] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    0.892913] ata1.00: configured for UDMA/133
[    0.893286] scsi 0:0:0:0: Direct-Access     ATA      WDC WD1600BEVT-2 11.0 PQ: 0 ANSI: 5
[    0.893605] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    0.893836] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    0.893993] sd 0:0:0:0: [sda] Write Protect is off
[    0.894008] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.894082] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.894471]  sda: sda1 sda2 < sda5 sda6 > sda3
[    0.953073] sd 0:0:0:0: [sda] Attached SCSI disk
[    0.953129] Freeing unused kernel memory: 656k freed
[    0.953717] Write protecting the kernel text: 4676k
[    0.953804] Write protecting the kernel read-only data: 1840k
[    0.992098] udev: starting version 151
[    1.044170] usb 1-5: new high speed USB device using ehci_hcd and address 2
[    1.292793] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.292855] r8169 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.292933] r8169 0000:01:00.0: setting latency timer to 64
[    1.293001]   alloc irq_desc for 26 on node -1
[    1.293008]   alloc kstat_irqs on node -1
[    1.293111] r8169 0000:01:00.0: irq 26 for MSI/MSI-X
[    1.295004] eth0: RTL8102e at 0xf8040000, 00:e0:91:1f:6c:f5, XID 14a00000 IRQ 26
[    1.386508] usb 1-5: configuration #1 chosen from 1 choice
[    1.532095] usb 1-6: new high speed USB device using ehci_hcd and address 3
[    1.654440] EXT4-fs (sda1): mounted filesystem with ordered data mode
[    1.675251] usb 1-6: configuration #1 chosen from 1 choice
[   19.588779] Adding 2931820k swap on /dev/sda6.  Priority:-1 extents:1 across:2931820k
[   19.626523] udev: starting version 151
[   19.987738] rtl8187se: module is from the staging directory, the quality is unknown, you have been warned.
[   19.998501] acpi device:1a: registered as cooling_device2
[   19.998812] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[   19.998942] ACPI: Video Device [IGD] (multi-head: yes  rom: no  post: no)
[   20.019911] atkbd.c: Unknown key pressed (translated set 2, code 0xf7 on isa0060/serio0).
[   20.019922] atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known.
[   20.023288] atkbd.c: Unknown key released (translated set 2, code 0xf7 on isa0060/serio0).
[   20.023299] atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known.
[   20.159890] lp: driver loaded but no devices found
[   20.177291] ieee80211_crypt: registered algorithm 'NULL'
[   20.177302] ieee80211_crypt: registered algorithm 'TKIP'
[   20.177309] ieee80211_crypt: registered algorithm 'CCMP'
[   20.177315] ieee80211_crypt: registered algorithm 'WEP'
[   20.177321]
[   20.177323] Linux kernel driver for RTL8180 / RTL8185 based WLAN cards
[   20.177330] Copyright (c) 2004-2005, Andrea Merello
[   20.177335] r8180: Initializing module
[   20.177341] r8180: Wireless extensions version 22
[   20.177346] r8180: Initializing proc filesystem
[   20.177417] r8180: Configuring chip resources
[   20.177452] r8180 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[   20.177468] r8180 0000:02:00.0: setting latency timer to 64
[   20.245078] Linux agpgart interface v0.103
[   20.270507] r8180: Channel plan is 2
[   20.270511]
[   20.270518] Dot11d_Init()
[   20.270530] r8180: MAC controller is a RTL8187SE b/g
[   20.270536] r8180: This is a PCI NIC
[   20.272954] r8180: usValue is 0x100
[   20.272959]
[   20.328556] r8180: EEPROM version 104
[   20.333394] r8180: WW:**PLEASE** REPORT SUCCESSFUL/UNSUCCESSFUL TO Realtek!
[   20.333425] intel_rng: FWH not detected
[   20.365286] Initializing USB Mass Storage driver...
[   20.374950] scsi2 : SCSI emulation for USB Mass Storage devices
[   20.378499] usbcore: registered new interface driver usb-storage
[   20.379104] USB Mass Storage support registered.
[   20.384264] usb-storage: device found at 3
[   20.384272] usb-storage: waiting for device to settle before scanning
[   20.449796] r8180: IRQ 18
[   20.451696] [drm] Initialized drm 1.1.0 20060810
[   20.459346] r8180: Driver probe completed
[   20.459352]
[   20.504168] agpgart-intel 0000:00:00.0: Intel 945GME Chipset
[   20.504467] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
[   20.507482] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[   20.568904] type=1505 audit(1273290372.293:2):  operation="profile_load" pid=546 name="/sbin/dhclient3"
[   20.569722] type=1505 audit(1273290372.293:3):  operation="profile_load" pid=546 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[   20.570187] type=1505 audit(1273290372.293:4):  operation="profile_load" pid=546 name="/usr/lib/connman/scripts/dhclient-script"
[   20.699594] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   20.699609] i915 0000:00:02.0: setting latency timer to 64
[   20.733113] [drm] set up 7M of stolen space
[   20.830748] kjournald starting.  Commit interval 5 seconds
[   20.831402] EXT3 FS on sda5, internal journal
[   20.831417] EXT3-fs: mounted filesystem with ordered data mode.
[   20.864184] composite sync not supported
[   20.864737] [drm] initialized overlay support
[   21.278078] composite sync not supported
[   21.283818] fb0: inteldrmfb frame buffer device
[   21.283827] registered panic notifier
[   21.283845] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   21.283946] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   21.283999] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   21.292139] vga16fb: initializing
[   21.292152] vga16fb: mapped to 0xc00a0000
[   21.292164] vga16fb: not registering due to another framebuffer present
[   21.324471] Console: switching to colour frame buffer device 128x37
[   21.381748] Synaptics Touchpad, model: 1, fw: 6.5, id: 0x1c0b1, caps: 0xa04711/0xa00000
[   21.391866] hda_codec: ALC888: BIOS auto-probing.
[   21.401997] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7
[   21.459514] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
[   22.221909] composite sync not supported
[   22.404019] hda-intel: azx_get_response timeout, switching to polling mode: last cmd=0x008f000e
[   25.352304] type=1505 audit(1273290377.077:5):  operation="profile_load" pid=729 name="/usr/share/gdm/guest-session/Xsession"
[   25.364256] type=1505 audit(1273290377.089:6):  operation="profile_replace" pid=731 name="/sbin/dhclient3"
[   25.371896] type=1505 audit(1273290377.093:7):  operation="profile_replace" pid=731 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[   25.372371] type=1505 audit(1273290377.097::  operation="profile_replace" pid=731 name="/usr/lib/connman/scripts/dhclient-script"
[   25.398536] usb-storage: device scan complete
[   25.402308] scsi 2:0:0:0: Direct-Access     Generic- Multi-Card       1.00 PQ: 0 ANSI: 0 CCS
[   25.405806] type=1505 audit(1273290377.129:9):  operation="profile_load" pid=734 name="/usr/bin/evince"
[   25.413074] sd 2:0:0:0: Attached scsi generic sg1 type 0
[   25.422125] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[   25.432751] type=1505 audit(1273290377.157:10):  operation="profile_load" pid=734 name="/usr/bin/evince-previewer"
[   25.445407] type=1505 audit(1273290377.169:11):  operation="profile_load" pid=734 name="/usr/bin/evince-thumbnailer"
[   25.653459] r8169: eth0: link down
[   25.654146] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   25.669033] r8180: Bringing up iface
[   25.867573] r8180: Card successfully reset
[   26.604210] r8180: WIRELESS_MODE_G
[   26.604214]
[   26.623539] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   26.917167] apm: BIOS not found.
[   27.352310] composite sync not supported
[   27.494754] composite sync not supported
[   27.565333] atkbd.c: Unknown key pressed (translated set 2, code 0xf7 on isa0060/serio0).
[   27.565345] atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known.
[   27.568882] atkbd.c: Unknown key released (translated set 2, code 0xf7 on isa0060/serio0).
[   27.568893] atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known.
[   30.996561] composite sync not supported
[   31.138573] composite sync not supported
[   31.294546] composite sync not supported
[   33.455646] atkbd.c: Unknown key pressed (translated set 2, code 0xf7 on isa0060/serio0).
[   33.455657] atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known.
[   33.459056] atkbd.c: Unknown key released (translated set 2, code 0xf7 on isa0060/serio0).
[   33.459067] atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known.
[   42.583521] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[   42.583534] vboxdrv: Warning: 2.6.31+ kernel detected. Most likely the hardware performance
[   42.583539] vboxdrv: counter framework which can generate NMIs is active. You have to prevent
[   42.583544] vboxdrv: the usage of hardware performance counters by
[   42.583548] vboxdrv:   echo 2 > /proc/sys/kernel/perf_counter_paranoid
[   42.583559] vboxdrv: Found 2 processor cores.
[   42.583996] vboxdrv: fAsync=0 offMin=0x1b0 offMax=0x201c
[   42.586527] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[   42.586537] vboxdrv: Successfully loaded version 3.1.6_OSE (interface 0x00100001).
[   42.601964] vboxguest: exports duplicate symbol RTMemExecFree (owned by vboxdrv)
[   43.989275] composite sync not supported
[   44.133964] composite sync not supported
[   44.273978] composite sync not supported
[   44.410546] ppdev: user-space parallel port driver
[   47.027710] Linking with default: channel is 6
[   47.044971] Associated successfully
[   47.044980] Using G rates
[   47.059402] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   47.146353] atkbd.c: Unknown key pressed (translated set 2, code 0xf7 on isa0060/serio0).
[   47.146364] atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known.
[   47.150041] atkbd.c: Unknown key released (translated set 2, code 0xf7 on isa0060/serio0).
[   47.150053] atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known.
[   47.188129] Linking with default: channel is 6
[   47.210160] Associated successfully
[   47.210170] Using G rates
[   52.887128] composite sync not supported
[   57.808046] wlan0: no IPv6 routers present
[  191.603379] process `skype' is using obsolete setsockopt SO_BSDCOMPAT
[ 6455.705674] __ratelimit: 18 callbacks suppressed
[ 6455.705688] cheese[7305]: segfault at 24 ip 00525438 sp b4dfce60 error 6 in libgtk-x11-2.0.so.0.2000.0[41c000+3cd000]
[ 7562.185050] composite sync not supported

[Manoboy]

Existe alguma maneira de conectar o celular via bluetooth no notebook e uma vez conectado atender o celular através do computador como se fosse um kit viva voz?

[ClaudemarMartins]

http://mestredigital.blogspot.com/2008/05/instalando-e-configurando-bluetooth-no.html - Descobri hoje este link.

Nele fala para dar este comando;

#sudo apt-get install bluetooth bluez-btsco bluez-cups bluez-gnome bluez-pin bluez-utils gbtsco gnome-bluetooth libbluetooth2 libbtctl4 libgnomebt0 python-bluez gammu wammu

No meu deu isso.

Código: [Selecionar]

Lendo listas de pacotes... Pronto
Construindo árvore de dependências       
Lendo informação de estado... Pronto
bluetooth já é a versão mais nova.
bluez-cups já é a versão mais nova.
O pacote bluez-gnome não está disponível, mas é referenciado por outro pacote.
Isto pode significar que o pacote está faltando, ficou obsoleto ou
está disponível somente a partir de outra fonte
E: O pacote bluez-gnome não tem candidato para instalação


[Tota]

Existe alguma maneira de conectar o celular via bluetooth no notebook e uma vez conectado atender o celular através do computador como se fosse um kit viva voz?

Possivel é, mas voce teria que encontrar um pacote para isto. Nativamente não tem como transferir para o som da maquina.