# dmesg | grep bttv
[ 31.843467] bttv: driver version 0.9.16 loaded
[ 31.843475] bttv: using 32 buffers with 2080k (520 pages) each for capture
[ 31.843574] bttv: Bt8xx card found (0).
[ 31.843630] bttv0: Bt878 (rev 17) at 0000:00:0a.0, irq: 23, latency: 32, mmio: 0xeb106000
[ 31.843643] bttv0: using: Prolink PixelView PlayTV pro [card=37,insmod option]
[ 31.843686] bttv0: gpio: en=00000000, out=00000000 in=00c0dfe0 [init]
[ 31.844511] bttv0: using tuner=2
[ 31.844517] bttv0: i2c: checking for TDA9875 @ 0xb0... not found
[ 31.845229] bttv0: i2c: checking for TDA7432 @ 0x8a... not found
[ 31.845947] bttv0: i2c: checking for TDA9887 @ 0x86... not found
[ 31.885663] bttv0: registered device video0
[ 31.885705] bttv0: registered device vbi0
[ 31.885749] bttv0: registered device radio0
[ 31.885770] bttv0: PLL: 28636363 => 35468950 .. ok
[ 92.385208] bttv0: PLL can sleep, using XTAL (28636363).
[ 1810.152529] bttv0: unloading
[ 1834.163575] bttv: driver version 0.9.16 loaded
[ 1834.163585] bttv: using 32 buffers with 2080k (520 pages) each for capture
[ 1834.163693] bttv: Bt8xx card found (0).
[ 1834.163716] bttv0: Bt878 (rev 17) at 0000:00:0a.0, irq: 23, latency: 32, mmio: 0xeb106000
[ 1834.163743] bttv0: using: Prolink PixelView PlayTV pro [card=37,insmod option]
[ 1834.163786] bttv0: gpio: en=00000000, out=00000000 in=00c0dfe0 [init]
[ 1834.164591] bttv0: using tuner=2
[ 1834.164597] bttv0: i2c: checking for TDA9875 @ 0xb0... not found
[ 1834.165321] bttv0: i2c: checking for TDA7432 @ 0x8a... not found
[ 1834.166041] bttv0: i2c: checking for TDA9887 @ 0x86... not found
[ 1834.180300] bttv0: registered device video0
[ 1834.180328] bttv0: registered device vbi0
[ 1834.180353] bttv0: registered device radio0
[ 1834.180375] bttv0: PLL: 28636363 => 35468950 .. ok
[ 1868.092283] bttv0: PLL can sleep, using XTAL (28636363).